The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Mike A. Swatek, Principal Engine
BS Mechanical Eng - Univ of Oklahoma
The case made in these documentaries is virtually 100% against the official record and points to some very disturbing likely possibilities. A proper investigation is needed before some…
Mike A. Swatek, Principal Engine
BS Mechanical Eng - Univ of Oklahoma
Claremore, OK
I became familiar with steel structures as a draftsman for Kerr McGee designing offshore drilling rigs from 1979-82. After spending 3.5 years to earn a BS mechanical engineering degree at the University of Oklahoma in 1985, the oil industry was in a deep recession. The next couple of years were spent developing and designing robots and industrial manipulator arms. 1988-90 were interesting years at Rockwell Rocketdyne developing rocket engine systems for Star Wars. Since 1990 the technical challenge of electrical submersible pumping systems for the oil industry has been my profession. Currently as Principal Engineer at Baker Hughes International I mentor young engineers and serve as a technical adviser for a wide range of system and mechanical challenges for the BHI Centrilift products.
The case made in these documentaries is virtually 100% against the official record and points to some very disturbing likely possibilities. A proper investigation is needed before some very dark elements in our government are able to deliver us all the way down the road to serfdom.
Omar Gazali
Structural Engineer
Bachelor of Engineering, Civil Engineering,The City University Of New York, 2014
Having a building collapse exactly the same way, 110 stories on top of each other, not once, but twice is like winning the lotto, twice, at the same…
Omar Gazali
Bachelor of Engineering, Civil Engineering,The City University Of New York, 2014
Brooklyn, NY
Occupation: Structural Engineer
Proud graduate of The City College of New York. If Professor Goshn taught us one thing right, it's the behavior of material under stresses.
Having a building collapse exactly the same way, 110 stories on top of each other, not once, but twice is like winning the lotto, twice, at the same machine, the same day. The probability of this happening is 2^220. In engineering, this is referred to as Controlled Demolition. If you look closely at the video footage, explosions occur on each floor before they collapse. I don't blame the public for believing the media, only few are equipped with the right set of skills to understand the behavior of material under stresses. Very sad to see a government deceive its people in this horrible way.
Brent A. Carlson, PE
B.S.M.E: U of Idaho, MBA: Utah State
After being made aware of the AE911 video by a technical associate, and watching the video, I was somewhat shocked to learn about the structural collapse of building…
Brent A. Carlson, PE
B.S.M.E: U of Idaho, MBA: Utah State
Ogden, UT
Brent Carlson, P.E. has 39 years experience as a Mechanical Engineer, Technical Manager, and Consultant. He holds B.S.M.E and MBA degrees and has held Engineering and Management positions in the Nuclear, Automotive, Defense, and Manufacturing industries.
After being made aware of the AE911 video by a technical associate, and watching the video, I was somewhat shocked to learn about the structural collapse of building 7. The associated videos prompted me to watch the collapse of the other buildings with a more critical eye. I was shocked to see the explosions and resulting ejections of structural materials that were occurring a few stories below the collapsing structure above. The real cause of these explosions needs to be determined and made known. Further, how this was accomplished, and by whom, also needs to be exposed.
Joe Tyndall, BS
BS Electrical Engineering, MIT
On 9/11, I watched for 15 minutes (about 2:30 EDT), by then Osama bin Laden was already being blamed. I stepped away muttering, How could he be so…
Joe Tyndall, BS
BS Electrical Engineering, MIT
Eugene, OR
Proficient (experienced) with analog and digital circuit design at board, chip and system level, mechanical design, software development, energy systems and physics
On 9/11, I watched for 15 minutes (about 2:30 EDT), by then Osama bin Laden was already being blamed. I stepped away muttering, How could he be so stupid? This is exactly what Bush and crew have been waiting for. I then tuned the whole thing out for two and a half years until an interview on KPFK radio got my attention. For the next few months, I spent my free time reviewing the evidence. The collapse of the (3) towers as described by the official 9/11 story, if true, would be the first ever documented violation of the laws of physics and would undermine the foundation of all engineering disciplines. Another energy source must be present. Explosives is the only hypothesis thus far put forth that is consistent with all available evidence. The fossil record regarding 9/11 is both detailed and overwhelming. Explosives implies fore-knowledge, making 9/11 a false-flag psychological operation. A proper investigation and indictments are long overdue.
Malcolm E. Anderson
BS Mechanical Engineering, California State Polytechnic University at Pomona
The flashes in advance of the collapse and the symmetrical nature of the collapse of all three buildings is very unusual. In addition, the testimony of people at…
Malcolm E. Anderson
BS Mechanical Engineering, California State Polytechnic University at Pomona
Wildomar, CA
I have a degree in mechanical engineering from Cal Poly Pomona and a (now expired) license in the state of California. I was a power plant engineer and later a project manager.
The flashes in advance of the collapse and the symmetrical nature of the collapse of all three buildings is very unusual. In addition, the testimony of people at the site as to hearing multiple explosions cannot be explained by other than a controlled demolition.
Carlos A. Yermoli
Consultant
MS Civil Engineering, MIT, 1972
There is an anomalous causality between the skyscraper failures and the precedent collisions and fire.
Carlos A. Yermoli
MS Civil Engineering, MIT, 1972
Miami, FL
Occupation: Consultant
BS Civil Engineering, MIT, 1971. MS Civil Engineering, MIT, 1972. I have 45 years of experience in the electricity sectors of more than 60 countries. I have special expertise in all aspects of hydroelectric generation.
There is an anomalous causality between the skyscraper failures and the precedent collisions and fire.
Jane L. Van Praag
Retired
BAs in Anthropology and Archeology
Even as a lay person, there were parts of the official explanation that did not make full sense to me. Over time, my attention was brought to the…
Jane L. Van Praag
BAs in Anthropology and Archeology
Bartlett, TX
Occupation: Retired
As single parent of 4 children, I took long time to earn my degrees. Now reside on our small family farm; have taken Ag-extension/other workshops to be good steward of our land. Master Gardener. Help Food For Friends, totally volunteer group preparing/delivering delicious/nutritious meals to our local hungry plus additional assistance where able. Participate against inhumane immigration policies. Progressive Democrat, WCDP Precinct 425 Chair for years; also work elections. Support Bernie Sanders for President.
Even as a lay person, there were parts of the official explanation that did not make full sense to me. Over time, my attention was brought to the various documentaries such as In Plane Sight and Loose Change. I have never been satisfied with the conclusions around JFK's assassination either. Both situations tear me apart because I don't want to be any kind of zealot or conspiracy theorist and I deplore thinking domestic entities regard us as expendable, yet there is evidence and/or the lack thereof which I cannot sanely ignore.
Denise Hall
B.S., Mfg Engineer, Bradley University
I do not believe that the towers and WTC 7 could have collapsed in such a uniform manner, given the temperatures at which the jet fuel burned and…
Denise Hall
B.S., Mfg Engineer, Bradley University
Memphis, TN
Formal training includes statics, dynamics, metallurgy, chemistry. Have worked in manufacturing as an engineer and owned/operated a communications company dealing with fiber optics installation, testing, and termination. Currently working on three patents.
I do not believe that the towers and WTC 7 could have collapsed in such a uniform manner, given the temperatures at which the jet fuel burned and the duration of time that had elapsed before they collapsed. Also, the presence of thermite in samples of building materials has not been fully investigated and resolved.
Dale R. Silbernagel, PE, MBA
B, Chemical Engineering
The evidence of a controlled demolition of Building 7 using thermite is overwhelming.
Dale R. Silbernagel, PE, MBA
B, Chemical Engineering
Greenwood Village, CO
Retired, but P.E. license still active. Also hold an MBA from the University of Michigan. Held positions as an engineer and in engineering and business management before retiring in 2001.
The evidence of a controlled demolition of Building 7 using thermite is overwhelming.
Jorge Zavala, BSET
BSET, Cal Poly San Luis Obispo
I hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 ' specifically the…
Jorge Zavala, BSET
BSET, Cal Poly San Luis Obispo
Alameda, CA
Attended East Los Angeles and LA Trade Tech before transferring to Cal poly San Luis Obispo.
I hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 ' specifically the collapses of the World Trade Center Towers and Building 7.
Franklin D. Lemkey, PhD
Consulting Engineer
BSE Metallurgical Engineering, University of Michigan-Ann Arbor, 1960
Did research on nano Al/FexO etc nano layers produced by physical vapor deposition for Joining applications and former student at Dartmouth. After completing his PhD formed a company…
Franklin D. Lemkey, PhD
BSE Metallurgical Engineering, University of Michigan-Ann Arbor, 1960
Palm Beach Gardens, FL
Occupation: Consulting Engineer
BSE 1960 Metallurgical and Chemical, University of Michigan; DPhil 1974 University of Oxford England. Retired Fellow United Technologies Research Center. 1960-2000 Director of Commercialization USIC; 2001 Founded Joint Turbine Coating Co PW- Paton Kiev Ukraine; 1992-2014 Consulting Scientist; 2001-2018 International Center for Electron Beam Technology Ukraine Academy of Science. Kiev Adjunct Professor Thayer School Dartmouth College Visiting Professor Engineering UCONN
Did research on nano Al/FexO etc nano layers produced by physical vapor deposition for Joining applications and former student at Dartmouth. After completing his PhD formed a company to produce nano composites. It was immediately obvious from examination of dust from all three towers that nano materials were used to damage the floors after aircraft impact resulting in smoke clouds of Al2O3 + micron spherical Fe particles. Also the supporting columns were cut using nano thermite.
Harvey Rifkin
UC B EE
Harvey Rifkin
UC B EE
Benicia, CA
Petition Signatories
Christopher Nowak, Welder
Saint Clair, MI
Occupation: Welder
Education: certified welder
Christopher Nowak, Welder
certified welder
Saint Clair, MI
Occupation: Welder
I'm a machinist and welder by trade with 10 years in the trade. Im familiar with melting points and temperatures of controlled and uncontrolled fires.
There's no doubt in my mind that 911 was an inside job. No steel constructed building has ever collapsed from fire, even after 10, 14, 17, and 19, hours of burning! These buildings collapsed perfectly. Dr. Steven Jones found traces of thermite from samples taken from the building site. The windows on both sides of the hole in the Pentagon were still intact where the wings should of hit. All the news media had the same questions when reporting live that day, questions about the lack of debris, questions about the sound of bombs, and explosions, but the next day none of those questions were asked or ever brought up again by these mainstream media sources.
Carlos A. Ugarte
Tampa, FL
Occupation: Welder
Carlos A. Ugarte
Tampa, FL
Occupation: Welder
My name is Carlos Ugarte, and I was a student at Jefferson high and was in their welding program for three years. My instructor (a great welder teacher and friend) Jack Mills taught me everything I know. I'm not certified yet but will be soon. I learned a lot about metal even gained a welders love for it. So I know when I say it starts to melt at 2500f no less, and its not even liquid at that point just structurally weak. An open flame fire being fueled by jet fuel(high octane) can only peak at about 1200f....???? there's to many blanks.
Not enough people know use these peoples techniques against them create a state of awe in the media make sure people are listening...that is the first step then we can pursue those responsible!
Larry Jones
Bandon, OR
Occupation: Welder/Steel Worker
Education: student
Larry Jones
student
Bandon, OR
Occupation: Welder/Steel Worker
Welder and metal worker. Builder and innovator. Very familiar with the properties of steel due to experience in welding.
The natural upward-force resistance of the buildings, opposing the downward fall from the top, [especially in light that the buildings increased their strength very substantially each floor (from the top down) by the thickening of the central core columns], leaves no other possible conclusion than that an exorbitantly high volume of intelligently directed and provided energy was necessary to accomplish these unnatural, symmetric, plowing through of themselves at nearly freefall speed.
Patrick R. Harper
Clemmons, NC
Occupation: Welder
Patrick R. Harper
Clemmons, NC
Occupation: Welder
Matthew J. Tougas
Oxnard, CA
Occupation: Welding
Education: Welding
Matthew J. Tougas
Welding
Oxnard, CA
Occupation: Welding
I am a welder/metal fabricator and have a pretty good understanding of how metals work.
Metal-framed structures do not fail due to fire unless that fire is oxy-acetylene fueled. Jet fuel is extremely flammable but nowhere near acetylene. Not to mention most of the fuel looked like it exploded on impact. Also, 10-ton steel beams were thrown several hundred feet from the building, and molten steel (which is on video to see) flowed from the windows... nothing about the official report makes any sense.
Keith Edghill
Los Angeles, CA
Occupation: Certified Building Mechanical Inspector
Education: 15+
Keith Edghill
15+
Los Angeles, CA
Occupation: Certified Building Mechanical Inspector
4 Years College Preparatory education @ Daniel Murphy Catholic High School2 Years Post Secondary College education @ Xavier University of Louisiana5 Years Local 108 SMWIA JATC Apprenticeship education13 Years Journeyman Level employment as a SMWIA and SMART Union member6 Years TABB Certified Air Balance Technician4 Years TABB Certified Indoor Air Quality Technician5 Years ICC Certified California Combination Dwelling Inspector15 Years Licensed Real Estate Salesperson in California4 Years Commissioned Notary Public in California
There must be a more thorough examination of the events that took place on September 11th, 2001. The fact the the official book published by The National Commission on Terrorist Attacks Upon the United States does not contain a single word regarding the collapse of WTC 7 in particular; as well as, many conflicting eyewitness testimonies and a list of unexplained evidence which is in stark contrast to the official explanation, simply warrants another look. It, the obvious planned attack, has not been satisfactorily explained to the many persons who have suffered due to the lack of a complete investigation. Until this honest investigation occurs, the negative impact of this event shall haunt the many persons who clearly see the open ended questions that linger and wreak havoc on the psychology of civilized society.
David Salisbury, Welder
Houston, TX
Occupation: Welder
Education: student
David Salisbury, Welder
student
Houston, TX
Occupation: Welder
I am a student and learned how to weld when I was very young. I am not an expert, and I do not have a license. I do have logic and reason, which is enough to want to ask questions about events that seem strange.
I see the steel beams bent into horseshoe shapes, but the beam was not broken or even cracked. When welding, it takes a lot of heat to bend steel, and even then, I still manage to break the metal and make mistakes. I do not have the technology to bend giant steel beams. I live in the US where many chemicals can be made available to me through online purchases to heat any metals that need to be bent, but where would I find that in a cave in Afghanistan?
Billy T. Axiotis
Newton Falls, OH
Occupation: Welder/Fitter
Billy T. Axiotis
Newton Falls, OH
Occupation: Welder/Fitter
Structural steel welder for over 20 years..I have had extensive back round with steel and how it work's under stress and heat.
After watching the video and having doubt's before science has proven that I was justified in having doubt's.
Daniel J. Olsen
Loveland, CO
Occupation: Welder
Education: student
Daniel J. Olsen
student
Loveland, CO
Occupation: Welder
I am a 24 year old God fearing gun loving American. I'm currently going to school for welding.
9-11 was obviously an inside job and the real terrorists need to be brought to justice!
Pamela S. De Baun
Bay Saint Louis, MS
Occupation: Welder/Fitter
Pamela S. De Baun
Bay Saint Louis, MS
Occupation: Welder/Fitter
Prior to disability, I was an industrial construction welder/fitter. I worked primarily in the south on power plants, steel mills and paper mills along with some other projects and in one fabrication shop. I was Xray and bridge certified. I worked in this field until 2005 when hurricane Katrina took all my tools and forever changed my life.
I have experience in rigging and demolition. I've long had a fascination with imploded buildings and have been a sponge for knowledge of how buildings are imploded from the first one I saw. I could never reconcile the forensics of the collapsed buildings, the implosion-like free fall of the towers, the delayed collapse of Building 7 and the *cheesecloth* explanations, or lack thereof, forthcoming from the government *investigations*. There remains much to be explained and brought to light. The only things I can see that are clear are that the official explanations are invalid, that there is a strong network of interlinked motives for controlled demolition and that these clearly WERE controlled demolitions.
Arthur Pollock
Perryville, MD
Occupation: Welder
Arthur Pollock
Perryville, MD
Occupation: Welder
I have been around steel and welding most of my life. I was an inspector for a large rail car repair company for years and I had a lot of training in the field of inspecting welds and steel structure as well as other related topics. I know Jet fuel cannot melt steel or except in the most perfect condition weaken it.
The fact that building 7 fell at free fall speed as did the other 2 towers tells us that their were other forces in affect beside the short lived jet fuel fires that brought these towers down
Mitch A. Lamoure
Sequim, WA
Occupation: Welder
Education: Welding
Mitch A. Lamoure
Welding
Sequim, WA
Occupation: Welder
Welder / fabricator.... I work with steel and Aluminum all day everyday. I know how strong Steel is and that it can't be effected by low temperatures as with airplane fuels.
There's no way Steel can break the way they tell us. As a welder I work with steel everyday and I know the strength of steel and have never bought the lie.
Zac Lovett, Machinest-Certif
Hutchinson, KS
Occupation: Machinest-Certified Welder
Education: Welding Technology & Metallurgy
Zac Lovett, Machinest-Certif
Welding Technology & Metallurgy
Hutchinson, KS
Occupation: Machinest-Certified Welder
I am an Automotive Machinist, and I have a Degree in Welding Technology & Metallurgy. I have over ten years experience working with metal.
The collapses of the 9/11 buildings are very unique. They are the first Metal Structured buildings to collapse from fire. Anyone experienced with metal structures can see they did not collapse from fire alone.
Cody M. Cardinal, Welder/Fabricator
Brandon, MB
Occupation: Steel Fabrication
Education: hands on training/3 years experience
Cody M. Cardinal, Welder/Fabricator
hands on training/3 years experience
Brandon, MB
Occupation: Steel Fabrication
Over 3 years welding/fabricating for Hi-Tec industries designing and assembling farm/agricultural equipment. Recon construction (same company that rebuilt New Orleans) Most of my training has been hands on, but have received certification in several related fields.
It is painfully obvious to me... to anyone that has taken the time for personal investigation, that 9/11 is a government cover-up. A mass murder. For money, and political advantage. I am formulating a series of my own questions and concerns, and am in early stages of doing what I can for the cause. It is our collective efforts that will reveal the truth. If we as a nation cannot get to the bottom of this, we have failed as human beings, and will likely suffer a similar fate as the victims of 9/11. As the saying goes, The truth is out there, Let's find it!
Sergey Gashkov, Professional Wel
Edmonton, AB, Canada
Occupation: Construction
Education: Journeyman welder
Sergey Gashkov, Professional Wel
Journeyman welder
Edmonton, AB, Canada
Occupation: Construction
I have been a welder for more than 10 years. I have taken special course for structural welding.
Low carbon steel used in construction of steel buildings bends under pressure. It does not break. Also the beams used in buildings are larger and stronger at the lower floors, it means that the fall of Building 7 must have been slowed down as each falling floor hits a lower floor.
Leon R. Thomas, Metal Fabricator
Auburn, WA
Occupation: Welder/Fabricator
Leon R. Thomas, Metal Fabricator
Auburn, WA
Occupation: Welder/Fabricator
Was nuclear silver brazer for the government on Polaris submarines and familiar with temps caosing various metals to soften and flow.
Even before exposure to these facts of explosives evidence logic alone told me the buildings didn't fall because of fires, as they would have toppled over sideways.
James L. Gordon
La Center, WA
Occupation: Welder
James L. Gordon
La Center, WA
Occupation: Welder
I am a selfemployed welder who knows how fires could have never caused those core column beams to be sliced as the one showed in pictures why our government are so ignorant when it comes to looking for those who are responsible for this horrific crime are as guilty as those domestic terrorist who implemented and were at the highest levels of the Bush administration and I have a strong feeling after doing a lot of research that Israel had plaid a pArt as well there were many corporations who had motives to have a trillion dollar profit from suplying all the vbhardware that the two wars would require in search of the terrorist who never existed to kill .Following those that did profit and gained power and to secure security for Israel are in my oppinion those responsible this part I am sure of though and it was not Arabs with Box cutters responsible for sure the eviudence states so many diferent ways that a cover-up took place the only reason a coverup took place would be to protect the governments role in it.Any body who has the courage to look at the evidence comes to a painful truth that leaves them changed completely and have no longer the trust for government corporation real intent to provide safety to the people because they are cold blooded mass murders and need to be tried in a transparent trial by a jury .Obama is also as guilty as the previous administration with all the evidence to deny the people the right to see real true justice is helping to protect those criminals and that makes him one as well .These criminals are running our country for the sake of organized criminal glory for power and profit at the expense of killing innocent people terrorizing and torture for this shows how cold blooded and ruthless they are and have no care in the world for human life or suffering until there brought to justice wer are enslaved to the needs of real monsters hell bent on playing the same staged type event agin except you can count on it being more shocking than 911 was...
There is no doubt explosives were used. There are no doubts about it there was a cover-up to prevent evidence being gathered about the reason those buildings were brought down were irresponsible investigators to have such a bogus fraudulent report intended to put blame away from those in our government who were responsible and the military industrial complex , the oil cartels ,and new Nazi style government entities for control over people and removing rights to liberty .The Taliban gained nothing follow the money and at the end of that trail are the ones responsible for the collapses..
Shawn Elder
Medford, OR
Occupation: Welder
Education: Degreed
Shawn Elder
Degreed
Medford, OR
Occupation: Welder
Small town man who was privileged enough to experience all of the natural beauty that Oregon has to offer here in the southern part of the state. I was raised in the country and loved it. Some of my hobbies include drawing, welding and political research. I love life and freedom.
I have been a political prisoner and seen the aftermath of September 11, 2001 and the police stating that continues to get worse because of the effects of fear over our country. The forensic evidence is overwhelming to say the least concerning the events of 9/11 the barrage of information is more than just theory it is in fact truth. The Buildings were professionally demolished by other explosive means than what is said in the Commission report.
Stephen R. Vangen
Saltcoats, SK, Canada
Occupation: Journeyman Welder
Stephen R. Vangen
Saltcoats, SK, Canada
Occupation: Journeyman Welder
redseal journeyman welder 30 yrs
Tommy Staal
Goteborg, Angered, Sweden
Education: Welder/metal worker
Tommy Staal
Welder/metal worker
Goteborg, Angered, Sweden
I have bean working all over the world building ships, oil-rigs and refineries.
All 3 buildings had vertical steel beams that hold them up,you cant pancake those!! As a world citizen I demand an real investigation of 9/11.
Wayne Patterson, Machinist
Brazoria, TX
Occupation: Machinist/Welder
Education: Machinist Degree
Wayne Patterson, Machinist
Machinist Degree
Brazoria, TX
Occupation: Machinist/Welder
Work in a refinery for 25yrs. and steel will not melt from gas from planes. Steel has to get to a temperature of 2300 to 2400 degrees before it will melt. Jet fuel will only get to 900 to 1000 degrees, not hot enough to melt steel.
It was an inside job. There is no way it was brought down by a plane. It was a controlled demolition by the people that were leasing the building and some of the people in the White House. They new what was going to happen, that is why they were not there. Like the governor of New York. Why was he and all the other people in building 7,because they knew about what was going to happen.
David J. Villier, Welder
Lincoln Park, MI
Occupation: Heavy Industrial
Education: MN. High Pressure Steam and Ammonia
David J. Villier, Welder
MN. High Pressure Steam and Ammonia
Lincoln Park, MI
Occupation: Heavy Industrial
I've been around the Heavy Industrial field many years and know for a fact kerosene/Jet Fuel would have near zero effect upon steel.
I've been around the Heavy Industrial field many years and know for a fact kerosene/Jet Fuel would have near zero effect upon steel.
Gregg F. Murray, Welder/Fabricato
Toms River, NJ
Occupation: Welding/Fabricating
Gregg F. Murray, Welder/Fabricato
Toms River, NJ
Occupation: Welding/Fabricating
My name is Gregg Murray. I have been working with metals as a welder and fabricator for 12 years now. I am not a metallurgist by any means but possess a significant amount of knowledge on the topic of metals and the affects of heat and other factors upon them.
I believe there are several physical impossibilities which have to take place in order for the official story to work.
John W. Hughes
Birkkenhead, United Kingdom
Occupation: Welder
Education: GCE
John W. Hughes
GCE
Birkkenhead, United Kingdom
Occupation: Welder
Worked on construction of nuclear submarines. Did relevant tests.
Anybody could see it was a demolition. Building 7 was the proof.
Johnny L. Hickman, Truther
San Angelo, TX
Occupation: Welder, Mechanic, Carpenter, Plumber, Yo
Education: B.S. Agronomy
Johnny L. Hickman, Truther
B.S. Agronomy
San Angelo, TX
Occupation: Welder, Mechanic, Carpenter, Plumber, Yo
Highly educated, Truth-loving, God-fearing West Texas Farmer, Texas Elementary Education Certificate, Certified Respiratory Therapy Technician.
9/11 was an inside job. There is solid evidence that thermite was used to bring the buildings down. Building 7 was reported as having gone down BEFORE it went down. We the People deserve the Truth. All three buildings went down in a manner consistent with demolition techniques.
Bob Crane
Middletown, NY
Occupation: Welder/Fabricator
Bob Crane
Middletown, NY
Occupation: Welder/Fabricator
As a mechanic and welder working with various metals and fuels for over 30 years
I'm having a hard time believing jet fuel supporting a dead flame melted or even softened the steel structure in the Towers, then falling perfectly into their own foot print.
Danny Morozuk, Welder
Metcalfe, ON, Canada
Occupation: Welder
Danny Morozuk, Welder
Metcalfe, ON, Canada
Occupation: Welder
28 years in the welding trade repairing, fabricating and learning. To learn is to master no matter the discipline.
I cannot believe an aluminum aircraft could inflict such damage on a steel structure. Like cutting a hot knife with butter. The free fall speed of the buildings goes against common sense . I cannot see how people cannot see what happened. I do not claim to have answers only questions. Maybe the most important question would be WHY
Collin E. Mayfield
Baton Rouge, LA
Occupation: Welder
Collin E. Mayfield
Baton Rouge, LA
Occupation: Welder
I am a 23 year old welder and ironworker, and I am one of many people who want a full investigation into the evidence surrounding 9/11.
I work with metal, specifically steel, every single day at work. I work with temperatures of over 6,000 degrees Fahrenheit, and I have first hand experience and understanding of the properties and changes in steel as it is heated to and brought down from these temperatures. I don't claim to know a thing about building construction or architecture, but I know at what temperatures hydrocarbons burn, and I know steel, and something just doesn't add up with the official story. I personally believe explosives HAD to have been used to achieve such a quick, complete, and unimpeded collapse of the WTC buildings.
Jerry A. Eamon, Welder
Seattle, WA
Occupation: Welder
Jerry A. Eamon, Welder
Seattle, WA
Occupation: Welder
I am a 32 year old welder from Seattle Washington. I have been doing metal work, brazing, welding (TIG,MIG,STICK ECT) for 15 years now, I may not have a degree but I know how metal works.
I am a welder, and I melt metal together for a living... the moment the first tower fell I knew that whatever made it collapse had to be hotter than jet fuel, the jet fuel would have had to burn at over 1500c to melt structural steel... and the fires inside the south tower were dieing... you could tell by how much black smoke that was coming out of it. I may not be an engineer but I know metal and there is no way in hell that that jet fuel was hot enough to melt steel.
Douglas Wallis
Toccoa, GA
Occupation: Welder, Metal Worker
Douglas Wallis
Toccoa, GA
Occupation: Welder, Metal Worker
Master Welder, with full knowledge of temperatures needed to melt or cut steel, aluminum and other materials. Some knowledge of explosives and demolition, but lacking personal experience with same.
From personal observation of explosive demolitions, the footage of the building collapses could be used as educational tools of the correct way to accomplish bringing down a building in the most effective way possible. An airliner crashing into a building absolutely could not achieve this result.
Jason M. Davis
Pensacola, FL
Occupation: Welder/Fabricator
Jason M. Davis
Pensacola, FL
Occupation: Welder/Fabricator
I'm a sign fabricator/installer & have been welding aluminum & iron for twenty years or so, I also play guitar in a regional touring metal band called Parabellum.
After ten years it is still obvious to anyone who honestly looks in to it that the 9-11 commissions hands were deliberately tied & that it left more questions unanswered than not. 3,000+ Americans died that day & if there is even the slightest chance that the perpetrators are still at large then it's every patriots duty to help bring them to justice.
Rodger D. Pratt
Medford, OR
Occupation: Steel Erector Contractor
Rodger D. Pratt
Medford, OR
Occupation: Steel Erector Contractor
I am a retired structural ironworker and member of The International Association of Bridge Structural Ornamental and Reinforcing Ironworkers Local 86 Seattle WA. I worked 55 years at the trade, 30 years in the field, and 25 years as owner of Skyline Steel Inc.
I totally agree with the conclusion building 7 was deliberately imploded. I have personally witnessed 2 buildings brought down, and seen dozens of buildings, bridges and smoke stacks on TV. It is my opinion there is no way a fire could bring a building down as seen in the video.
David W. Bennett
Fredericksburg, VA
Occupation: Welder/Machinist/Mechanic
David W. Bennett
Fredericksburg, VA
Occupation: Welder/Machinist/Mechanic
My skills are centered in various skilled trades that include: master electrician, welder, machinist, A&P mechanic, master hvac, plumber, carpenter. I have both theoretical and practical knowledge of structural design, mechanical design, electronics, hydraulics, pneumatics. Some might consider them hobbies but I have a lifetime of employment history utilizing these skills.
It is my opinion that based on the visual evidence available from multiple angles that there are far too many anomalies to accept the conclusions drawn by the NIST report. The visual evidence suggests controlled demolition and not a structural failure caused by the impact of airliners. As an experienced welder/machinist I have a reasonable grasp of the physical properties of structural steel including its conductive properties. No reasonable explanation has ever been offered to explain the pyroclastic bloom that blanketed much of lower Manhattan. My opinion is that all three buildings were destroyed by controlled demolition. The Twin Towers exhibited near vaporization of concrete, glass and the ejection of steel at velocities impossible to have been caused by compression failure.