The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Saba Ahmed, Engineer At Inte
BSc Engineering, Portland State University OR
If the scientific evidence is really true, then we have the biggest terrorists living comfortably in the United States and they are not the cave men from Afghanistan…
Saba Ahmed, Engineer At Inte
BSc Engineering, Portland State University OR
Portland, OR
Engineer at Intel Corporation and law student at Lewis & Clark Law School in Portland, Oregon USA.
If the scientific evidence is really true, then we have the biggest terrorists living comfortably in the United States and they are not the cave men from Afghanistan as we were led to believe. May God help us!!!
John P. Sharkey, RN
Registered Nurse
Degreed
I was exposed to the truth of 9/11 by a c-span presentation on 'FORA.TV entitled Theories of September 11th'. This was October of 2007. I was impressed and…
John P. Sharkey, RN
Degreed
San Francisco, CA
Occupation: Registered Nurse
I am not an engineer. I am a nurse. I possess adequate investigative skills and common sense, which I think are all that are required to decipher the truth.
I was exposed to the truth of 9/11 by a c-span presentation on 'FORA.TV entitled Theories of September 11th'. This was October of 2007. I was impressed and began my own research. I was convinced it was an inside job when I heard the statements of people coming out of the WTC stating there were explosions in the sub-levels that killed, maimed, and burned people. How could that be unless there were people on the inside? The official story did not stand up to examination. My view of the world was radically changed that day. I have not been the same since. We who know are compelled to action.
Anthony Pinkos, Photographer
Graphic Design
Associates in Visual Communications
I have lived, for the past nine years, with the events of 9/11 haunting me nearly everyday. What started out as anger and what I then thought of…
Anthony Pinkos, Photographer
Associates in Visual Communications
Pottstown, PA
Occupation: Graphic Design
I am a professional Photographer/Photo-Retoucher for a large medical company based out of Audubon, PA (about 30 minutes North of Philadelphia). I have a certification in Commercial Art, and run a small non-profit design firm for local artists and free-thinkers, called Loralai Press (www.myspace.com/loralaipress).
I have lived, for the past nine years, with the events of 9/11 haunting me nearly everyday. What started out as anger and what I then thought of as patriotism, has now turned into guilt, fear, and unrelenting anxiety. Starving for the truth as to what exactly happened that day... and what's continued to happen from that point on. In the Fall of 2001, I was only 18 years old. The college that I was attending was located less than a mile away from an airport. When news struck of what was going on in NYC and at the Pentagon, we were immediately dismissed (evacuated) from class with instructions to get away from the school/airport area. As a friend of mine and myself made the terrifying one hour trip back to our home town, we listened to the radio in a desperate grasp for what was happening. Ironically enough... Howard Stern was giving the most detailed account of what was going on in NYC that day. Our minds were filled with thoughts of more attacks, war, and even being selected for the draft. Thankfully, neither of us ended up fighting in Iraq. Life slowly went back to normal, that is, until more and more evidence started to come about of a possibly conspiracy within our government being involved in the attacks of September 11th. Now, as a parent, I strongly fear for my 7 month old daughters future. In my mind, I feel that things can only become more distorted and volatile in our nation. Feeling there is no end in sight, to the hypocrisy and deceit that plagues our country. Tired of being misinformed by the media as well as the people who run the United States of America... I now search for help, information, and guidance. I would also like to offer my assistance in spreading the word about the need for real answers regarding the historic events of September 11th, 2001. Thank you.
Richard Tanner
Electrical Engineer
B.S. Engineering, Arkansas State University, 2003,
Many unknowns or questionable answers still remain in regards to September 11, 2001, particularly in regards to Building 7. A proper and public investigation should have been done…
Richard Tanner
B.S. Engineering, Arkansas State University, 2003,
Little Rock, AR
Occupation: Electrical Engineer
Bachelor of Science in Engineering, 2003. Entire engineering career spent in consulting engineering for electrical systems in building construction.
Many unknowns or questionable answers still remain in regards to September 11, 2001, particularly in regards to Building 7. A proper and public investigation should have been done and would still be beneficial.
Wilson J. Vargas, EIT
Civil
The amount of evidence about what really happened on September 11 and more importantly, why the buildings collapsed, is overwhelming. The American public should not be kept in…
Wilson J. Vargas, EIT
Civil
Weston, FL
Wilson Vargas Civil Engineer. Graduated in 2007 from Florida International University.
The amount of evidence about what really happened on September 11 and more importantly, why the buildings collapsed, is overwhelming. The American public should not be kept in the dark. They should demand a response for the 3000 lives lost on that day.
John Titus, AIA
Architect
B Arch, Architecture, University of Minnesota Twin Cities, 1976
I'd like a convincing scientific explanation for what happened with WT7
John Titus, AIA
B Arch, Architecture, University of Minnesota Twin Cities, 1976
Boston, MA
Occupation: Architect
I've been an architect for 30 years. After a rich experience as director of architecture with CCJM Engineering in Chicago, a self-imposed sabbatical, and a move to Boston with my wife I am ready to resume my career. I have a B Arch 1976, University of Minnesota.
I'd like a convincing scientific explanation for what happened with WT7
Robert J. Schuerger, PE, SMIEEE
Electrical Engineer
BS Electrical Engineering, University of Akron, 1976
The visual evidence of secondary explosions plus the fact that it takes a blast furnace with forced oxygen to soften steel make it obvious there are many more…
Robert J. Schuerger, PE, SMIEEE
BS Electrical Engineering, University of Akron, 1976
Los Angeles, CA
Occupation: Electrical Engineer
I'm a registered professional engineer with over thirty-five years of experience in power engineering, specializing in electrical design, testing and maintenance, commissioning, reliability analysis, power quality and on-site engineering support of critical facilities. I'm a senior member of the IEEE and was Chapter 4 Chairman for the IEEE Emerald Book, Standard 1100-2005: Recommended Practice for Powering and Grounding Electronic Equipment. I'm the chair for the new IEEE Standard 3006.7 ' 2013: Recommended Practice for Determining the Reliability of '7x24' Continuous Power Systems in Industrial and Commercial Facilities, which replaces Chapter 8 of the Gold Book.
The visual evidence of secondary explosions plus the fact that it takes a blast furnace with forced oxygen to soften steel make it obvious there are many more facts than those that are commonly known.
Brent Bill
BS Industrial Engineering
Why did NIST choose not to evaluate the possible use of explosives? How did fire cause the 8-second free fall of a 47-story steel structure?
Brent Bill
BS Industrial Engineering
Nashville, TN
I am a degreed engineer who is bothered by the lack of adequate scientific research that has been done concerning the collapse of the World Trade Centers, specifically WTC 7.
Why did NIST choose not to evaluate the possible use of explosives? How did fire cause the 8-second free fall of a 47-story steel structure?
Scott Mann, AIA
Architect And Trainer
BArch, California Polytechnic State University-San Luis Obispo, 2011
The collapse of the WTC towers including building 7 are incongruent with the official narrative. The analysis by the University of Fairbanks Alaska released in September 2019 has…
Scott Mann, AIA
BArch, California Polytechnic State University-San Luis Obispo, 2011
Jacksonville, FL
Occupation: Architect And Trainer
I worked for numerous years in construction, manufacturing, and architecture before attending Cal Poly school of Architecture and studying at the WAAC. I graduated with awards from the department before working for the State of California and then taking a position as job captain and then project manager at a small architecture firm. I volunteered many hours in nonprofits and was appointed as a city planning commissioner. That ended early when I was forced to resign for pointing out problems with major developments. I was able to find work at a global software company and had to relocate to the east coast to continue my career. I now train architects and help them solve design problems.
The collapse of the WTC towers including building 7 are incongruent with the official narrative. The analysis by the University of Fairbanks Alaska released in September 2019 has determined that the NIST report is erroneous.
Stefan A. Williams
Military Special Operations Command (Soc
Visual inspection of the falling structures has always given me some pause. And the physics and chemistry aspects of such an event were definitely NOT catalyzed by the…
Stefan A. Williams
Raleigh, NC
Occupation: Military Special Operations Command (Soc
Military Special Operations veteran specializing in Intelligence Analysis, Psychological Operations, and Communications Signals Intercept -- TOP SECRET CLEARANCE awarded in 1989
Visual inspection of the falling structures has always given me some pause. And the physics and chemistry aspects of such an event were definitely NOT catalyzed by the crashing of two commercial aircraft. We, as American citizens, deserve more than to be fed a false-flag cover story. Life is way too short to be led by the nose.
Caleb Dalton, PhD
Student
BS, BME, Virginia Commonwealth University, 2019
How hard do you have to throw an aluminum can to, not only shear a steel beam and not exit, but then to cause a delayed, controlled and…
Caleb Dalton, PhD
BS, BME, Virginia Commonwealth University, 2019
NY
Occupation: Student
Magnum cum laude A.S. 2015; Magnum cum laude concurrent B.S.s in BME and Physics with minors in Biology, Chemistry, Mathematics, and Mechanical Engineering 2019; Summa cum laude PhD in BME ongoing but curricula completed and elevated to candidacy 2022.
How hard do you have to throw an aluminum can to, not only shear a steel beam and not exit, but then to cause a delayed, controlled and complete collapse upon itself instead of toppling or sliding?
Gene Brault, Contractor/Indus
BS Industrial Design
We have the evidence: - - - - - Photographic evidence of cut core columns - - - Chemical evidence of laboratory analysis revealing explosive residues - -…
Gene Brault, Contractor/Indus
BS Industrial Design
Los Angeles, CA
A Bachelor of Science degree from California State University at Long Beach, and forty years as a California B1 General Contractor.
We have the evidence: - - - - - Photographic evidence of cut core columns - - - Chemical evidence of laboratory analysis revealing explosive residues - - - Photographic evidence of explosive squibs - - - Video testimony from the building's owner that they pulled WTC 7 - - - - And the fact that all of the laws of physics and science will not allow buildings to collapse at free fall speed, the way WTC 1, 2 & 7 came down.
Petition Signatories
Christopher Nowak, Welder
Saint Clair, MI
Occupation: Welder
Education: certified welder
Christopher Nowak, Welder
certified welder
Saint Clair, MI
Occupation: Welder
I'm a machinist and welder by trade with 10 years in the trade. Im familiar with melting points and temperatures of controlled and uncontrolled fires.
There's no doubt in my mind that 911 was an inside job. No steel constructed building has ever collapsed from fire, even after 10, 14, 17, and 19, hours of burning! These buildings collapsed perfectly. Dr. Steven Jones found traces of thermite from samples taken from the building site. The windows on both sides of the hole in the Pentagon were still intact where the wings should of hit. All the news media had the same questions when reporting live that day, questions about the lack of debris, questions about the sound of bombs, and explosions, but the next day none of those questions were asked or ever brought up again by these mainstream media sources.
Carlos A. Ugarte
Tampa, FL
Occupation: Welder
Carlos A. Ugarte
Tampa, FL
Occupation: Welder
My name is Carlos Ugarte, and I was a student at Jefferson high and was in their welding program for three years. My instructor (a great welder teacher and friend) Jack Mills taught me everything I know. I'm not certified yet but will be soon. I learned a lot about metal even gained a welders love for it. So I know when I say it starts to melt at 2500f no less, and its not even liquid at that point just structurally weak. An open flame fire being fueled by jet fuel(high octane) can only peak at about 1200f....???? there's to many blanks.
Not enough people know use these peoples techniques against them create a state of awe in the media make sure people are listening...that is the first step then we can pursue those responsible!
Larry Jones
Bandon, OR
Occupation: Welder/Steel Worker
Education: student
Larry Jones
student
Bandon, OR
Occupation: Welder/Steel Worker
Welder and metal worker. Builder and innovator. Very familiar with the properties of steel due to experience in welding.
The natural upward-force resistance of the buildings, opposing the downward fall from the top, [especially in light that the buildings increased their strength very substantially each floor (from the top down) by the thickening of the central core columns], leaves no other possible conclusion than that an exorbitantly high volume of intelligently directed and provided energy was necessary to accomplish these unnatural, symmetric, plowing through of themselves at nearly freefall speed.
Patrick R. Harper
Clemmons, NC
Occupation: Welder
Patrick R. Harper
Clemmons, NC
Occupation: Welder
Matthew J. Tougas
Oxnard, CA
Occupation: Welding
Education: Welding
Matthew J. Tougas
Welding
Oxnard, CA
Occupation: Welding
I am a welder/metal fabricator and have a pretty good understanding of how metals work.
Metal-framed structures do not fail due to fire unless that fire is oxy-acetylene fueled. Jet fuel is extremely flammable but nowhere near acetylene. Not to mention most of the fuel looked like it exploded on impact. Also, 10-ton steel beams were thrown several hundred feet from the building, and molten steel (which is on video to see) flowed from the windows... nothing about the official report makes any sense.
Keith Edghill
Los Angeles, CA
Occupation: Certified Building Mechanical Inspector
Education: 15+
Keith Edghill
15+
Los Angeles, CA
Occupation: Certified Building Mechanical Inspector
4 Years College Preparatory education @ Daniel Murphy Catholic High School2 Years Post Secondary College education @ Xavier University of Louisiana5 Years Local 108 SMWIA JATC Apprenticeship education13 Years Journeyman Level employment as a SMWIA and SMART Union member6 Years TABB Certified Air Balance Technician4 Years TABB Certified Indoor Air Quality Technician5 Years ICC Certified California Combination Dwelling Inspector15 Years Licensed Real Estate Salesperson in California4 Years Commissioned Notary Public in California
There must be a more thorough examination of the events that took place on September 11th, 2001. The fact the the official book published by The National Commission on Terrorist Attacks Upon the United States does not contain a single word regarding the collapse of WTC 7 in particular; as well as, many conflicting eyewitness testimonies and a list of unexplained evidence which is in stark contrast to the official explanation, simply warrants another look. It, the obvious planned attack, has not been satisfactorily explained to the many persons who have suffered due to the lack of a complete investigation. Until this honest investigation occurs, the negative impact of this event shall haunt the many persons who clearly see the open ended questions that linger and wreak havoc on the psychology of civilized society.
David Salisbury, Welder
Houston, TX
Occupation: Welder
Education: student
David Salisbury, Welder
student
Houston, TX
Occupation: Welder
I am a student and learned how to weld when I was very young. I am not an expert, and I do not have a license. I do have logic and reason, which is enough to want to ask questions about events that seem strange.
I see the steel beams bent into horseshoe shapes, but the beam was not broken or even cracked. When welding, it takes a lot of heat to bend steel, and even then, I still manage to break the metal and make mistakes. I do not have the technology to bend giant steel beams. I live in the US where many chemicals can be made available to me through online purchases to heat any metals that need to be bent, but where would I find that in a cave in Afghanistan?
Billy T. Axiotis
Newton Falls, OH
Occupation: Welder/Fitter
Billy T. Axiotis
Newton Falls, OH
Occupation: Welder/Fitter
Structural steel welder for over 20 years..I have had extensive back round with steel and how it work's under stress and heat.
After watching the video and having doubt's before science has proven that I was justified in having doubt's.
Daniel J. Olsen
Loveland, CO
Occupation: Welder
Education: student
Daniel J. Olsen
student
Loveland, CO
Occupation: Welder
I am a 24 year old God fearing gun loving American. I'm currently going to school for welding.
9-11 was obviously an inside job and the real terrorists need to be brought to justice!
Pamela S. De Baun
Bay Saint Louis, MS
Occupation: Welder/Fitter
Pamela S. De Baun
Bay Saint Louis, MS
Occupation: Welder/Fitter
Prior to disability, I was an industrial construction welder/fitter. I worked primarily in the south on power plants, steel mills and paper mills along with some other projects and in one fabrication shop. I was Xray and bridge certified. I worked in this field until 2005 when hurricane Katrina took all my tools and forever changed my life.
I have experience in rigging and demolition. I've long had a fascination with imploded buildings and have been a sponge for knowledge of how buildings are imploded from the first one I saw. I could never reconcile the forensics of the collapsed buildings, the implosion-like free fall of the towers, the delayed collapse of Building 7 and the *cheesecloth* explanations, or lack thereof, forthcoming from the government *investigations*. There remains much to be explained and brought to light. The only things I can see that are clear are that the official explanations are invalid, that there is a strong network of interlinked motives for controlled demolition and that these clearly WERE controlled demolitions.
Arthur Pollock
Perryville, MD
Occupation: Welder
Arthur Pollock
Perryville, MD
Occupation: Welder
I have been around steel and welding most of my life. I was an inspector for a large rail car repair company for years and I had a lot of training in the field of inspecting welds and steel structure as well as other related topics. I know Jet fuel cannot melt steel or except in the most perfect condition weaken it.
The fact that building 7 fell at free fall speed as did the other 2 towers tells us that their were other forces in affect beside the short lived jet fuel fires that brought these towers down
Mitch A. Lamoure
Sequim, WA
Occupation: Welder
Education: Welding
Mitch A. Lamoure
Welding
Sequim, WA
Occupation: Welder
Welder / fabricator.... I work with steel and Aluminum all day everyday. I know how strong Steel is and that it can't be effected by low temperatures as with airplane fuels.
There's no way Steel can break the way they tell us. As a welder I work with steel everyday and I know the strength of steel and have never bought the lie.
Zac Lovett, Machinest-Certif
Hutchinson, KS
Occupation: Machinest-Certified Welder
Education: Welding Technology & Metallurgy
Zac Lovett, Machinest-Certif
Welding Technology & Metallurgy
Hutchinson, KS
Occupation: Machinest-Certified Welder
I am an Automotive Machinist, and I have a Degree in Welding Technology & Metallurgy. I have over ten years experience working with metal.
The collapses of the 9/11 buildings are very unique. They are the first Metal Structured buildings to collapse from fire. Anyone experienced with metal structures can see they did not collapse from fire alone.
Cody M. Cardinal, Welder/Fabricator
Brandon, MB
Occupation: Steel Fabrication
Education: hands on training/3 years experience
Cody M. Cardinal, Welder/Fabricator
hands on training/3 years experience
Brandon, MB
Occupation: Steel Fabrication
Over 3 years welding/fabricating for Hi-Tec industries designing and assembling farm/agricultural equipment. Recon construction (same company that rebuilt New Orleans) Most of my training has been hands on, but have received certification in several related fields.
It is painfully obvious to me... to anyone that has taken the time for personal investigation, that 9/11 is a government cover-up. A mass murder. For money, and political advantage. I am formulating a series of my own questions and concerns, and am in early stages of doing what I can for the cause. It is our collective efforts that will reveal the truth. If we as a nation cannot get to the bottom of this, we have failed as human beings, and will likely suffer a similar fate as the victims of 9/11. As the saying goes, The truth is out there, Let's find it!
Sergey Gashkov, Professional Wel
Edmonton, AB, Canada
Occupation: Construction
Education: Journeyman welder
Sergey Gashkov, Professional Wel
Journeyman welder
Edmonton, AB, Canada
Occupation: Construction
I have been a welder for more than 10 years. I have taken special course for structural welding.
Low carbon steel used in construction of steel buildings bends under pressure. It does not break. Also the beams used in buildings are larger and stronger at the lower floors, it means that the fall of Building 7 must have been slowed down as each falling floor hits a lower floor.
Leon R. Thomas, Metal Fabricator
Auburn, WA
Occupation: Welder/Fabricator
Leon R. Thomas, Metal Fabricator
Auburn, WA
Occupation: Welder/Fabricator
Was nuclear silver brazer for the government on Polaris submarines and familiar with temps caosing various metals to soften and flow.
Even before exposure to these facts of explosives evidence logic alone told me the buildings didn't fall because of fires, as they would have toppled over sideways.
James L. Gordon
La Center, WA
Occupation: Welder
James L. Gordon
La Center, WA
Occupation: Welder
I am a selfemployed welder who knows how fires could have never caused those core column beams to be sliced as the one showed in pictures why our government are so ignorant when it comes to looking for those who are responsible for this horrific crime are as guilty as those domestic terrorist who implemented and were at the highest levels of the Bush administration and I have a strong feeling after doing a lot of research that Israel had plaid a pArt as well there were many corporations who had motives to have a trillion dollar profit from suplying all the vbhardware that the two wars would require in search of the terrorist who never existed to kill .Following those that did profit and gained power and to secure security for Israel are in my oppinion those responsible this part I am sure of though and it was not Arabs with Box cutters responsible for sure the eviudence states so many diferent ways that a cover-up took place the only reason a coverup took place would be to protect the governments role in it.Any body who has the courage to look at the evidence comes to a painful truth that leaves them changed completely and have no longer the trust for government corporation real intent to provide safety to the people because they are cold blooded mass murders and need to be tried in a transparent trial by a jury .Obama is also as guilty as the previous administration with all the evidence to deny the people the right to see real true justice is helping to protect those criminals and that makes him one as well .These criminals are running our country for the sake of organized criminal glory for power and profit at the expense of killing innocent people terrorizing and torture for this shows how cold blooded and ruthless they are and have no care in the world for human life or suffering until there brought to justice wer are enslaved to the needs of real monsters hell bent on playing the same staged type event agin except you can count on it being more shocking than 911 was...
There is no doubt explosives were used. There are no doubts about it there was a cover-up to prevent evidence being gathered about the reason those buildings were brought down were irresponsible investigators to have such a bogus fraudulent report intended to put blame away from those in our government who were responsible and the military industrial complex , the oil cartels ,and new Nazi style government entities for control over people and removing rights to liberty .The Taliban gained nothing follow the money and at the end of that trail are the ones responsible for the collapses..
Shawn Elder
Medford, OR
Occupation: Welder
Education: Degreed
Shawn Elder
Degreed
Medford, OR
Occupation: Welder
Small town man who was privileged enough to experience all of the natural beauty that Oregon has to offer here in the southern part of the state. I was raised in the country and loved it. Some of my hobbies include drawing, welding and political research. I love life and freedom.
I have been a political prisoner and seen the aftermath of September 11, 2001 and the police stating that continues to get worse because of the effects of fear over our country. The forensic evidence is overwhelming to say the least concerning the events of 9/11 the barrage of information is more than just theory it is in fact truth. The Buildings were professionally demolished by other explosive means than what is said in the Commission report.
Stephen R. Vangen
Saltcoats, SK, Canada
Occupation: Journeyman Welder
Stephen R. Vangen
Saltcoats, SK, Canada
Occupation: Journeyman Welder
redseal journeyman welder 30 yrs
Tommy Staal
Goteborg, Angered, Sweden
Education: Welder/metal worker
Tommy Staal
Welder/metal worker
Goteborg, Angered, Sweden
I have bean working all over the world building ships, oil-rigs and refineries.
All 3 buildings had vertical steel beams that hold them up,you cant pancake those!! As a world citizen I demand an real investigation of 9/11.
Wayne Patterson, Machinist
Brazoria, TX
Occupation: Machinist/Welder
Education: Machinist Degree
Wayne Patterson, Machinist
Machinist Degree
Brazoria, TX
Occupation: Machinist/Welder
Work in a refinery for 25yrs. and steel will not melt from gas from planes. Steel has to get to a temperature of 2300 to 2400 degrees before it will melt. Jet fuel will only get to 900 to 1000 degrees, not hot enough to melt steel.
It was an inside job. There is no way it was brought down by a plane. It was a controlled demolition by the people that were leasing the building and some of the people in the White House. They new what was going to happen, that is why they were not there. Like the governor of New York. Why was he and all the other people in building 7,because they knew about what was going to happen.
David J. Villier, Welder
Lincoln Park, MI
Occupation: Heavy Industrial
Education: MN. High Pressure Steam and Ammonia
David J. Villier, Welder
MN. High Pressure Steam and Ammonia
Lincoln Park, MI
Occupation: Heavy Industrial
I've been around the Heavy Industrial field many years and know for a fact kerosene/Jet Fuel would have near zero effect upon steel.
I've been around the Heavy Industrial field many years and know for a fact kerosene/Jet Fuel would have near zero effect upon steel.
Gregg F. Murray, Welder/Fabricato
Toms River, NJ
Occupation: Welding/Fabricating
Gregg F. Murray, Welder/Fabricato
Toms River, NJ
Occupation: Welding/Fabricating
My name is Gregg Murray. I have been working with metals as a welder and fabricator for 12 years now. I am not a metallurgist by any means but possess a significant amount of knowledge on the topic of metals and the affects of heat and other factors upon them.
I believe there are several physical impossibilities which have to take place in order for the official story to work.
John W. Hughes
Birkkenhead, United Kingdom
Occupation: Welder
Education: GCE
John W. Hughes
GCE
Birkkenhead, United Kingdom
Occupation: Welder
Worked on construction of nuclear submarines. Did relevant tests.
Anybody could see it was a demolition. Building 7 was the proof.
Johnny L. Hickman, Truther
San Angelo, TX
Occupation: Welder, Mechanic, Carpenter, Plumber, Yo
Education: B.S. Agronomy
Johnny L. Hickman, Truther
B.S. Agronomy
San Angelo, TX
Occupation: Welder, Mechanic, Carpenter, Plumber, Yo
Highly educated, Truth-loving, God-fearing West Texas Farmer, Texas Elementary Education Certificate, Certified Respiratory Therapy Technician.
9/11 was an inside job. There is solid evidence that thermite was used to bring the buildings down. Building 7 was reported as having gone down BEFORE it went down. We the People deserve the Truth. All three buildings went down in a manner consistent with demolition techniques.
Bob Crane
Middletown, NY
Occupation: Welder/Fabricator
Bob Crane
Middletown, NY
Occupation: Welder/Fabricator
As a mechanic and welder working with various metals and fuels for over 30 years
I'm having a hard time believing jet fuel supporting a dead flame melted or even softened the steel structure in the Towers, then falling perfectly into their own foot print.
Danny Morozuk, Welder
Metcalfe, ON, Canada
Occupation: Welder
Danny Morozuk, Welder
Metcalfe, ON, Canada
Occupation: Welder
28 years in the welding trade repairing, fabricating and learning. To learn is to master no matter the discipline.
I cannot believe an aluminum aircraft could inflict such damage on a steel structure. Like cutting a hot knife with butter. The free fall speed of the buildings goes against common sense . I cannot see how people cannot see what happened. I do not claim to have answers only questions. Maybe the most important question would be WHY
Collin E. Mayfield
Baton Rouge, LA
Occupation: Welder
Collin E. Mayfield
Baton Rouge, LA
Occupation: Welder
I am a 23 year old welder and ironworker, and I am one of many people who want a full investigation into the evidence surrounding 9/11.
I work with metal, specifically steel, every single day at work. I work with temperatures of over 6,000 degrees Fahrenheit, and I have first hand experience and understanding of the properties and changes in steel as it is heated to and brought down from these temperatures. I don't claim to know a thing about building construction or architecture, but I know at what temperatures hydrocarbons burn, and I know steel, and something just doesn't add up with the official story. I personally believe explosives HAD to have been used to achieve such a quick, complete, and unimpeded collapse of the WTC buildings.
Jerry A. Eamon, Welder
Seattle, WA
Occupation: Welder
Jerry A. Eamon, Welder
Seattle, WA
Occupation: Welder
I am a 32 year old welder from Seattle Washington. I have been doing metal work, brazing, welding (TIG,MIG,STICK ECT) for 15 years now, I may not have a degree but I know how metal works.
I am a welder, and I melt metal together for a living... the moment the first tower fell I knew that whatever made it collapse had to be hotter than jet fuel, the jet fuel would have had to burn at over 1500c to melt structural steel... and the fires inside the south tower were dieing... you could tell by how much black smoke that was coming out of it. I may not be an engineer but I know metal and there is no way in hell that that jet fuel was hot enough to melt steel.
Douglas Wallis
Toccoa, GA
Occupation: Welder, Metal Worker
Douglas Wallis
Toccoa, GA
Occupation: Welder, Metal Worker
Master Welder, with full knowledge of temperatures needed to melt or cut steel, aluminum and other materials. Some knowledge of explosives and demolition, but lacking personal experience with same.
From personal observation of explosive demolitions, the footage of the building collapses could be used as educational tools of the correct way to accomplish bringing down a building in the most effective way possible. An airliner crashing into a building absolutely could not achieve this result.
Jason M. Davis
Pensacola, FL
Occupation: Welder/Fabricator
Jason M. Davis
Pensacola, FL
Occupation: Welder/Fabricator
I'm a sign fabricator/installer & have been welding aluminum & iron for twenty years or so, I also play guitar in a regional touring metal band called Parabellum.
After ten years it is still obvious to anyone who honestly looks in to it that the 9-11 commissions hands were deliberately tied & that it left more questions unanswered than not. 3,000+ Americans died that day & if there is even the slightest chance that the perpetrators are still at large then it's every patriots duty to help bring them to justice.
Rodger D. Pratt
Medford, OR
Occupation: Steel Erector Contractor
Rodger D. Pratt
Medford, OR
Occupation: Steel Erector Contractor
I am a retired structural ironworker and member of The International Association of Bridge Structural Ornamental and Reinforcing Ironworkers Local 86 Seattle WA. I worked 55 years at the trade, 30 years in the field, and 25 years as owner of Skyline Steel Inc.
I totally agree with the conclusion building 7 was deliberately imploded. I have personally witnessed 2 buildings brought down, and seen dozens of buildings, bridges and smoke stacks on TV. It is my opinion there is no way a fire could bring a building down as seen in the video.
David W. Bennett
Fredericksburg, VA
Occupation: Welder/Machinist/Mechanic
David W. Bennett
Fredericksburg, VA
Occupation: Welder/Machinist/Mechanic
My skills are centered in various skilled trades that include: master electrician, welder, machinist, A&P mechanic, master hvac, plumber, carpenter. I have both theoretical and practical knowledge of structural design, mechanical design, electronics, hydraulics, pneumatics. Some might consider them hobbies but I have a lifetime of employment history utilizing these skills.
It is my opinion that based on the visual evidence available from multiple angles that there are far too many anomalies to accept the conclusions drawn by the NIST report. The visual evidence suggests controlled demolition and not a structural failure caused by the impact of airliners. As an experienced welder/machinist I have a reasonable grasp of the physical properties of structural steel including its conductive properties. No reasonable explanation has ever been offered to explain the pyroclastic bloom that blanketed much of lower Manhattan. My opinion is that all three buildings were destroyed by controlled demolition. The Twin Towers exhibited near vaporization of concrete, glass and the ejection of steel at velocities impossible to have been caused by compression failure.