The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Rose Oropallo, MEd
Military Officer
M.Ed.
Crime scenes are preserved. Not a race FOR CLEANUP WITHIN HOURS. why? witnessed clean up. farce. inside job
Rose Oropallo, MEd
M.Ed.
Canajoharie, NY
Occupation: Military Officer
Physically injured at Ground Zero. Partner deceased. Demand investigation reopened.
Crime scenes are preserved. Not a race FOR CLEANUP WITHIN HOURS. why? witnessed clean up. farce. inside job
Irfan A. Toor, PhD
Process Engineer
PhD Chemical Engineering, University of Florida, 1985
I believe we do not know the whole truth and there is sufficient evidence that puts serious doubt on the official story of what happened. We must know…
Irfan A. Toor, PhD
PhD Chemical Engineering, University of Florida, 1985
Plano, TX
Occupation: Process Engineer
PhD in Chemical Engineering with 30 years experience in process engineering. I'm currently working in the enhanced oil recovery and upstream processing of low buy gas for production of natural gas and high purity carbon dioxide for oil recovery.
I believe we do not know the whole truth and there is sufficient evidence that puts serious doubt on the official story of what happened. We must know the facts.
Mojgan Saberi, BSArch
Degreed
Mojgan Saberi, BSArch
Degreed
Oakland, CA
Christopher A. Gillette
Political Science
student
2 planes, 3 buildings.....something is not adding up here! As a U.S. Army veteran I support the 9-11 family members in their call for an independent investigation with…
Christopher A. Gillette
student
Denton, TX
Occupation: Political Science
I'm not an architect or engineer but I support the 9-11 truth movement. US Army veteran, 82nd Airborne Division.
2 planes, 3 buildings.....something is not adding up here! As a U.S. Army veteran I support the 9-11 family members in their call for an independent investigation with full subpoena powers and access to all national security files related to the attacks of Sep.11, 2001. I also call for the prosecution and execution of any U.S. government officials that are found guilty of colluding with the terrorist attacks under Article 3, Sec.3(treason) of the U.S. Constitution.
David R. Solomon, Architect
Architect
B Arch
While the original official reports sounded credible, once I started examining the evidence - primarily the videos from news reports and amateur shots - the official story loses…
David R. Solomon, Architect
B Arch
Denver, CO
Occupation: Architect
34 years of professional experience in the USA (Colorado) and Europe (Rome, London, Frankfurt). Project designer and design & technical manager. 11 years of US Dept of Defense design, technical production management and construction administration.
While the original official reports sounded credible, once I started examining the evidence - primarily the videos from news reports and amateur shots - the official story loses all credibility.
Ida Lumintu, PhD
Lecturer/Engineer
PhD Industrial Engineering, University of Texas at Arlington, 2013
Please conduct a true investigation. Together we could find the justice.
Ida Lumintu, PhD
PhD Industrial Engineering, University of Texas at Arlington, 2013
Jember, Indonesia
Occupation: Lecturer/Engineer
Name: Ida LumintuPh.D. degree in Industrial Engineering from the University of Texas at Arlington (2013)
Please conduct a true investigation. Together we could find the justice.
John L. Mason, PhD
Ph.D. Electrical Engineering, Michigan
Clearly, the building collapses appear to be in the same manner as those taken down by controlled demolition.
John L. Mason, PhD
Ph.D. Electrical Engineering, Michigan
Portage, MI
Attended Muskegon, MI Community College and University of Michigan (Ann Arbor) for BSE(Electrical Engineering) 1961, MSE (Electrical Engineering) 1962 Univ. of Michigan, MS(Physics) 1967 Univ. of Michigan, Ph.D. (Electrical Engineering) 1982 Univ. of Mich. Quality Assurance Engineer at Applied Dynamics(Ann Arbor) 1968- 1969, Product Development Engineer at Entrekin Computers of Fenton, Mich. 1969-1971, Associate Professor of Electrical Engineering at Western Michigan in Kalamazoo 1971-2004
Clearly, the building collapses appear to be in the same manner as those taken down by controlled demolition.
Ralph U. Scheidler, BA, BTh, MSW
Social Worker
BA, Bth, MSW
I regard the evidence as overwhelming, that the official NIST narrative on 9/11 is false and maintain that a new and independent investigative commission on 9/11 should be…
Ralph U. Scheidler, BA, BTh, MSW
BA, Bth, MSW
Carlingford, NB, Canada
Occupation: Social Worker
Multiple university degrees with Masters degree in social work from University of Denver. 35 years in Social Work experience in schools and community mental health within USA and Canada. I am a citizen of both countries.
I regard the evidence as overwhelming, that the official NIST narrative on 9/11 is false and maintain that a new and independent investigative commission on 9/11 should be established to review all evidence now available since 2001, with transparent public oversight.
Henk Frouws, Bachelor Of Engi
higher technical college
After a long investigation on the internet I came to the conclusion of controlled demolition. I also took knowledge off all the debunking clips.
Henk Frouws, Bachelor Of Engi
higher technical college
Nijmegen, NC
Worked for about 13 years as Consulting Engineer in Nijmegen, Holland and now for 12 years own my own repairing company.
After a long investigation on the internet I came to the conclusion of controlled demolition. I also took knowledge off all the debunking clips.
Matthew S. Parsons
Engineer
BS Mechanical Engineering, Georgia Institute of Technology, 2008
I have never found the official story explaining the tragic events that occurred on September 11, 2001 to be plausible.
Matthew S. Parsons
BS Mechanical Engineering, Georgia Institute of Technology, 2008
Austin, TX
Occupation: Engineer
I have a BS in Mechanical Engineering from The Georgia Institute of Technology, 2008. I'm a third generation metal fabricator. I grew up building and driving race cars, which led me to become a mechanical engineer.
I have never found the official story explaining the tragic events that occurred on September 11, 2001 to be plausible.
Zachary M. Davis, Telephone Tech.
Telephone Tech.
I am no professional but I live in Las Vegas and have eye-witnessed the implosion of 5 older casinos and the way the WTC buildings went down were…
Zachary M. Davis, Telephone Tech.
Las Vegas, NV
Occupation: Telephone Tech.
I am just a concerned citizen and would like to get the Truth out and to other citizens who flat out deny anything told to them other than the media. Thank you for letting me sign.
I am no professional but I live in Las Vegas and have eye-witnessed the implosion of 5 older casinos and the way the WTC buildings went down were exactly the same to me. Plus building 7 just dropped with no plane hitting it....cant anyone see there is something wrong with what they have been told?
Brian P. Rittermann, Software Engineer
B.S. Engineering, Case Western Reserve
Concrete cannot be pulverized to dust without an explosion. Steel cannot melt at lower than 2750 degrees Fahrenheit, and jet fuel doesn't burn that hot. It was impossible…
Brian P. Rittermann, Software Engineer
B.S. Engineering, Case Western Reserve
Honolulu, HI
Studied mechanical engineering, electrical engineering, and computer science at Case Western Reserve. Graduated with a B.S. degree in Computer Engineering. Have worked for 12 years in the software industry.
Concrete cannot be pulverized to dust without an explosion. Steel cannot melt at lower than 2750 degrees Fahrenheit, and jet fuel doesn't burn that hot. It was impossible for jet fuel to bring down these steel reinforced buildings.
Petition Signatories
Aaron W. Grose
Garden City, MI
Occupation: Welder
Education: student
Aaron W. Grose
student
Garden City, MI
Occupation: Welder
I am not an architect, nor an engineer. I am a welding student with little technical knowledge on the subject at hand.
Though I lack the expertise to determine the nature of the events of 9/11, that based on the technical descriptions of the many experts on the subjects I believe it prudent and advisable to open an investigation on behalf of all affected.
Charlie Taylor
Golden, CO
Occupation: Structural Welder
Charlie Taylor
Golden, CO
Occupation: Structural Welder
I was a structural welder for fifteen years working for Chevron Oil, Gulf Oil, at Edna Coal Mine in Routt County, CO. I worked for Colorado Department of Transportation for ten years as a highway maintenance worker.
I watched TV on 9/11. I remember that day thinking and saying that there was no way that Building 7 could have come down the way it did as a result of a fire. I've built enough structural steel to know that Bldg.7 was demolished internally. The whole result of 9/11 from the two wars that are bankrupting our nation to the loss of our individual freedoms as the result of the patriot act have upset me long before I ever heard of 9-11 Truth.Org.
Steven T. Wilson
Courtice, ON, Canada
Occupation: Retired Metal Worker/Welder
Education: CSA 178.2 Welding Inspector L2
Steven T. Wilson
CSA 178.2 Welding Inspector L2
Courtice, ON, Canada
Occupation: Retired Metal Worker/Welder
I worked in Industrial Construction for over 40 years. I hold 2 trade certificates; one as a Sheet Metal Worker (Union Local 30, Toronto, Ont.) the other certificate as a Welder. I had experience in the construction of Nuclear Power Plants (Pickering and Darlington NGS) as well as work in the oil industry, (Suncor, Ft McMurray Alberta). I was a Welding Supervisor at the Pickering Nuclear Generating Station before going into a Quality Control role at that location. For the past 11 years I have held several positions as a Certified Level ll welding inspector, Canadian Welding Bureau. I have recently retired.
Having fabricated and installed metal structures my whole working career, I have tremendous respect for the skills, education and knowledge of the AE group. I couldn't have done my job without them doing theirs first. I worked from their drawings and details. They are the experts. My sincere gratitude goes out to all of you who have worked so hard for this investigation. The American people and the people of the world need justice.Godspeed.Sincerely Steven T Wilson
Stephanie D. Skaggs
Painesville, OH
Occupation: Welder
Stephanie D. Skaggs
Painesville, OH
Occupation: Welder
I am a welder for the Pipefitters local 120 out of Cleveland Ohio. I have been welding since 1992. I have worked with steel my whole career.
I feel that the World Trade Center buildings 1,2, and 7 were brought down by controlled demolition. I am seeking the truth from our government about what happened that day. I am hoping that the scientific evidence from the investigation will expose the people who are involved.
Steven Cybulski
Contoocook, NH
Occupation: Former Teacher, Welder And Farmer
Education: B.S. Education, UW Stout
Steven Cybulski
B.S. Education, UW Stout
Contoocook, NH
Occupation: Former Teacher, Welder And Farmer
I have worked in the construction business doing residential and light commercial concrete form work. I have also spent over 21 years in the heavy equipment business as a welder/fabricator/machinist, as well as working as an industrial education instructor.
Evidence of explosives found in the rubble and the lack of structural resistance (free fall) during the buildings collapse are suspect to the explanation of why the 3 buildings came down. Molten steel pouring out of one of the Towers before collapse, with no scientific reason for the steel to melt. Aviation fuel and office furniture can't produce the required heat. Unilateral systematic sequenced structural failure, attributed to randomly placed areas of stress (fire and structural damage). It does not add up.
Gary D. Brown, Station Attendant
Toronto, ON, Canada
Occupation: Welder
Education: Ph.D., School of Hard Knocks, Toronto
Gary D. Brown, Station Attendant
Ph.D., School of Hard Knocks, Toronto
Toronto, ON, Canada
Occupation: Welder
After joining Air Canada in May 1987 as a YYZ Ramp Station Attendant I discovered that local management and the executive of my I.A.M.A.W. had a policy in place to jointly make miserable the life of any employee and/or member they chose. After four and one-half years of misery I formally complained to the only person whom I thought I could trust because he was a member of The Order of Canada, Mr. Claude I. Taylor, O.St.J., O.C., and days later I was phoned at home, told not to wear my uniform to work, told not to punch-in and to go straight to the office of the YYZ GM. I was removed from company property, held incommunicado for just four (4) hours, told to sign a sheet of paper or I would be fired. On Dec 02/92 I sent a registered letter to Air Canada's Board of Directors and the ensuing resignation of Mr. Taylor, per the front page of The Financial Post of Dec 11/92 puzzled industry analysts. After a plethora of wrongful dismissals and undue evictions I have, as of today, now been homeless for some sixty-six (66) days stemming from my first undue or any arrest. Signed, Gary David Brown, Station Attendant Emeritus Toronto, ON January 17, 2013
I am looking for answers too. How did building seven, I believe it was, or the last building that fell, fall WITHOUT any aircraft hitting it? Could a bunch of people essentially or actually living in caves on the other side of the planet actually something like 9/11? What is Thermalite?
Joseph R. Staloch
Canby, OR
Occupation: Welder
Joseph R. Staloch
Canby, OR
Occupation: Welder
I'm not a engineer, but I've seen enough campfires to know how things fall in a fire. I am a certified welder and know that metal can withstand temperatures over 2000*. I've seen enough implosions to recognize one when I see one
Sean R. Macdowell
Somerset, CA
Occupation: Machinist
Education: To many to list
Sean R. Macdowell
To many to list
Somerset, CA
Occupation: Machinist
4 years(high school) architectural design, 2 years metal workshop(high school), 7years machinery operator, machinist.
3 inch thick steel girders and I-beams would take 3 times the amount of time to heat up long enough to get them to temperatures to warp or bend than the amount of time and fuel was allowed to burn and still would have not caused the whole structure to be comprised.
George Steen
bordentown, NJ
Occupation: Welder/Fitter
George Steen
bordentown, NJ
Occupation: Welder/Fitter
John Quinn, AS
Englewood, FL
Occupation: Retired Steel Fabricator Executive
Education: AS
John Quinn, AS
AS
Englewood, FL
Occupation: Retired Steel Fabricator Executive
Associate of Science degree 1967 - - Forty five years experience in the design, detailing, fabrication and erection of steel structures.
The damage sustained by Building 7 due its proximity to the Twin Towers could not have caused the collapse of the structure. - - No steel structure of similar size anywhere in the world has ever collapsed due to fire. - - The way it collapsed and the speed with which it did so has only been witnessed in a controlled demolition. - - The explanations offered by NIST are so flawed to make them worthless as to why the collapse occurred. They reek of deflection and coverup.
Christopher L. Owen
Waco, TX
Education: 2 yrs tech school
Christopher L. Owen
2 yrs tech school
Waco, TX
Structural steel welder, 2 years member of the American Welding Society.
In my past experience, I have never seen steel behave in the ways that NIST suggest and would like to see them demonstrate some of these behaviors.
Robert W. Hoff
Garden Grove, CA
Occupation: Precision Welder
Education: AA-Manufacturing
Robert W. Hoff
AA-Manufacturing
Garden Grove, CA
Occupation: Precision Welder
AA degree in Manufacturing Eng., and 30 years experience as a welder/fabricator.
I have personally welded and cut a variety of steel over the span of thirty years. It would be extremely difficult to bring all the internal support beams of the Twin Towers to a high enough temperature to cause complete failure in all of them, much less the many floors below them that were not affected by the resulting fire.
Lewis H. Edwards
Pittsburgh, PA
Occupation: Welder-Fabricater
Education: Welder-Fabricater
Lewis H. Edwards
Welder-Fabricater
Pittsburgh, PA
Occupation: Welder-Fabricater
Thirty-eight years of fabricating and welding all kinds of structural shapes.
From the time that I heard that they got hit to the time that I saw them fall I was thinking that they would have to tip over. It is inconceivable that they could ALL collapse in on themselves. Why do the demolition experts take so long to plan and place what is needed to fall buildings if it happens so consistently without planning? On the other hand I always felt that the elevator shafts acted like a Plenum to feed air to the Jet fuel to increase the rate of burn thus raising the temperature to be hot enough to weaken the surrounding structure. That being said, I can't conceive that could fall straight down.
Ted S. Osmundson
Murrieta, CA
Occupation: Heavy Equipment Operator, Mechanic, Welder, Realtor
Education: HS grad, some college, HDR mechanic from IUOE Local 12
Ted S. Osmundson
HS grad, some college, HDR mechanic from IUOE Local 12
Murrieta, CA
Occupation: Heavy Equipment Operator, Mechanic, Welder, Realtor
71 HS graduate. Attended Weber State University for business and communications in 83 & 84. Completed 6000 hour apprenticeship training for heavy duty repairman in 2000. Worked in a welding shop for 2 years learning basic welding skills. Former oilfield worker with 8 years experience in oil and gas drilling as well as geothermal drilling in Northern California. Former trucking business co owner.
Many unanswered questions about who was behind these criminal attacks on our people and country. The catastrophic failure of these redundantly strong structures combined with a pseudo investigation after the bulk of the buildings had been removed from the scene points to a massive cover up. The treatment of the first responders is also appalling given the fact they were unprotected in an area that was highly contaminated and dangerous to breath in.
Stuart Pearce
Port Aux Basques, NL, Canada
Occupation: Welder/Engineer
Education: student
Stuart Pearce
student
Port Aux Basques, NL, Canada
Occupation: Welder/Engineer
Self taught engineer/design equipment & build what I design. I have 45 years in the steel industry and have worked on high steel, worked in structural steel shops as a fabricator and welder, as well as a field welder. I still hold a journeyman welder certificate and I am retired as an injured worker.
Robert Cunningham
Indianapolis, IN
Occupation: Retired Welder/Fabricator/Machinist
Education: k-12, vocational school
Robert Cunningham
k-12, vocational school
Indianapolis, IN
Occupation: Retired Welder/Fabricator/Machinist
Went through K-12, thereafter attending several schools related to the metalworking field, as well as having been employed in same field for many years.
When viewing the videos of the collapses, the flashes of the explosive cutter charges can be clearly seen, despite their mighty efforts to obscure the fact with the generation of the dust clouds. Building 7 was a straight-up controlled demolition...it happened hours after the previous event(s), and the building was not hit by a plane. The 'official' story is pure, unadulterated hogwash, and the omission of Building 7's destruction in the '9-11 Omission Report' is an insult to the intelligence of the American people.
Nicholas Burtleson
Elk Grove, CA
Occupation: Welder
Education: certified welder
Nicholas Burtleson
certified welder
Elk Grove, CA
Occupation: Welder
I graduated high school in 2007, went to school to get welding certificate for might welding on up to 1/4 inch and also SMAW (stick weld.)vertical up on 1 inch. Worked in the field for 3 years or so and then moved to TX to manage and run a stabilized cement plant for Gulf Coast stabilized materials. Recently moved back to CA. And currently working for a friend who has a small mobile welding service.
In 2001 my father had mentioned that he had no doubt that those building had been brought down with some type of demolition. I was only 11 and I was very defensive of his statement and did not even entertain the notion. Then in 2007 I had a different feeling about the way the war had gone and had watched a few documentaries and it really blew me away. I am convinced just based upon simple physics that there is more than enough reason for a new independent investigation.
Dominic E. Charvet
Grandview, WA
Occupation: Welder/Farmer
Education: Grade 10
Dominic E. Charvet
Grade 10
Grandview, WA
Occupation: Welder/Farmer
Raised on Hop farm. Have seen Hop piking machines burn to the ground in grease fire and steel framework bends to the ground but is in tact.
Why have we not seen any other building fall this way, and why three in a row. Two from top to bottom and one like a regular destruction. Very suspicious. Should have been a lot of steel beams in tact.
Robert A. Kaley
Barrie, ON
Occupation: 15Yrs Steel Fabricator
Education: College Welder/Fitter
Robert A. Kaley
College Welder/Fitter
Barrie, ON
Occupation: 15Yrs Steel Fabricator
Completed Welder/Fitter course Mohawk College mid 80s. Worked in various custom steel fabricating shops in the Hamilton area. 80s and 90s. Also worked as a maintenance welder in an iron foundry for about 5yrs. Experienced at fabricating components for steel structures I-beams, trusses,etc. Very experienced at working with steel. Shearing punching,forming,bending,rolling-while cold. Welding,burning, gouging,melting,heating,annealing,bending-while hot. Familiar with problems of warpage and cracking when fabricating structures.
I have no conclusions about WTC1&2. WTC7 is the one that should not have collapsed. It was not hit by a plane, therefore the fire-proofing insulation was not compromised. There is not enough fuel in office furniture and carpet to weaken steel to the point of collapse. There is not enough oxygen present for this. That is why we filled the blast furnace with coke every morning and turned the blast air on, to melt iron. Lastly, steel structures are always way over engineered to withstand unforeseen occurrences like earthquakes or hurricanes. To think that it was like the proverbial 'straw that broke the camels back' is nonsense.
Kayne J. Maurice
Hamilton, ON, Canada
Occupation: Fabricator/Welder
Education: College
Kayne J. Maurice
College
Hamilton, ON, Canada
Occupation: Fabricator/Welder
Metal fabricator 5yrs, Welder 15yrs. Studied Electrical Engineering Technology.
I agree 100% with the need for a new, non-biased investigation into the crimes of '9/11', as I disagree wholly with the scenarios we've been provided by NIST.
Shaun J. Freeman
Woodridge, IL
Occupation: Master Fabricator For Esco Technologies (Ets Lindgren)/Ex Iron
Education: master welder & fabricator (iron/Steel )
Shaun J. Freeman
master welder & fabricator (iron/Steel )
Woodridge, IL
Occupation: Master Fabricator For Esco Technologies (Ets Lindgren)/Ex Iron
I work on special projects for my company which includes welding, grinding, melting Steele and other metals to produce shielding for my companies clients like: NASA,DEPARTMENT OF DEFENSE,AIR FORCE. MY prior line of work was with local 63 (the iron workers union) where I welded on projects like the Construction of Trump tower here in Chicago.
After working with the same materials used to construct the towers there is absolutely no way the towers could have collapsed in that fashion or at all due to a fire, let alone being at the top of the towers and having jet fuel as the source. I believe NIST FABRICATED its computer model to fit the official story
Justin P. Martia
Tempe, AZ
Occupation: Maintenance Technician/Welder
Education: Arizona State University
Justin P. Martia
Arizona State University
Tempe, AZ
Occupation: Maintenance Technician/Welder
I am a student of engineering in the aerospace concentration at Arizona State University. Before that I was a welder in the aerospace industry for a number of years. We would build parts for military vehicles for a defense contractor. I also worked as a welding fabricator building sandrails and safety roll cages as well as various other custom projects. It was through these jobs where I found my passion which drove me to pursue a degree in engineering.
I remember how I felt on that tragic day. I was in highschool in my morning math class where we watched the horror unfold. I didn't know it then but through years of seeing things that didn't add up, I decided to look more into what happened. Things just never added up. Thanks to the countless patriots that have put out documentaries, done research, and demanded answers, I have seen the truth. I want to continue to help and join the fight to bring the truth out to others and make them aware of the truth.
Jon V. Powell
Accokeek, MD
Occupation: Machinist, Piano Tuner, Trucker, Welder
Education: High school, trade schools, lifelong self learner
Jon V. Powell
High school, trade schools, lifelong self learner
Accokeek, MD
Occupation: Machinist, Piano Tuner, Trucker, Welder
I built and operated a machine shop for 12 years. I then went to work for the U.S. Treasury Department, requiring a security clearance to work in that trade for 15 years. I did two more years in The Department of Defense working around explosives. Earlier in life there was 9 years as a trucker, and concurrently 9 years as a piano tuner/technician. I am an accomplished welder.
I have appropriate credentials in all my trades, all of which require mechanical foresight to do the job right the first time. At age 67 and still active, my experience qualifies me to listen to the evidence, watch the video clips and conclude without a doubt that the official story in a fabrication. I worked around scientists, engineers in my job and recently worked with a physicist in cold fusion research. I may be considered an intelligent layman. Again, in the context of my many years of experience, the collapse of building 7 is recognized as a controlled demolition.
Scott Cole
Veguita, NM
Occupation: Journeyman Welder/Retired
Education: Trade School
Scott Cole
Trade School
Veguita, NM
Occupation: Journeyman Welder/Retired
Journeyman Welder 35 years. I have worked all over Alaska for the oil & Gas from Chevron, Arco, and Unocal.
"Amazingly, The U.S Government would like the American people to believe that these covered-face killers who live in a ""CAVE"" have unraveled the secret of how to outsmart every world power including the U.S. Empire with regard to every form of communication. They have stomped out the U.S. military, NSA, CIA, NATO, U.N. and the intelligence of Israel, U.K. and every other nation that surrounds them."
David Rogers
Arnold, MO
Occupation: Construction/Carpenter Welders
Education: GED
David Rogers
GED
Arnold, MO
Occupation: Construction/Carpenter Welders
Carpenter home builder. Hobby, car builder, hot rods, Motorcycles etc extensive use of steel and fabrication.
Seeing the steel melting running out of the corner was like someone using a cutting torch. If I could cut steel like that with jet fuel/kerosene I wouldn't need a plasma cutter.
William Wriston
Middle River, MD
Occupation: Steamfitter
Education: 5 year apprenticeship
William Wriston
5 year apprenticeship
Middle River, MD
Occupation: Steamfitter
I am a journeyman steamfitter since finishing an apprenticeship through Steamfitters local #438 in 1992.
It is obvious that the lies told can only be believed by a child.
Kurt L. Oppido
San Diego, CA
Occupation: Retired
Education: some college of ythe siskious
Kurt L. Oppido
some college of ythe siskious
San Diego, CA
Occupation: Retired
Trevor Clark
Waverly, WV
Occupation: Welder
Education: West Virginia University Parkersburg
Trevor Clark
West Virginia University Parkersburg
Waverly, WV
Occupation: Welder
4 years of welding/fabricating experience, fully certified
It was an inside job and the families of those lost that day deserve to know the truth
Kelvin E. Read
Buffalo, WY
Occupation: Equipment Operator, Welder
Education: High School Diploma, some college, (computer systems)
Kelvin E. Read
High School Diploma, some college, (computer systems)
Buffalo, WY
Occupation: Equipment Operator, Welder
I have a High school diploma along with 3 semesters of computer systems training. Raised on a farm in Iowa, ranch experience in Wyoming. Currently work in the rural water line/construction business. My specific skill set includes welding, mechanic work, small construction and small/heavy equipment operation. I believe I have a good general understanding of basic physics and commons sense which has lead me to agree with the architects and engineers group stance on 9/11.
Once a skeptic, I began to watch every video/documentary available and researched the web over the last several years. Common sense soon took over regarding the 9/11 event and it began to become quite obvious that the official story is just that a 'Story' and a poorly told one at that.
Anthony Alascio
Pasadena, MD
Occupation: Steamfitter
Anthony Alascio
Pasadena, MD
Occupation: Steamfitter
Steamfitter
Obviously it was a inside job
Rick M. Rondeau
Edmonton, AB, Canada
Occupation: B-Pressure/Structural Welder/Ironworker
Education: College Diploma
Rick M. Rondeau
College Diploma
Edmonton, AB, Canada
Occupation: B-Pressure/Structural Welder/Ironworker
Currently building a downtown steel and concrete high rise. Journeyman senior welder. I also am a certified heavy trailer mechanic and I was working as a video editor for a national television network on 9/11. My father is a pilot and I have not and do not believe the official 9/11 narrative.
Steel structure buildings do not collapse in there own footprint in near 10 seconds. Aluminum structure jets will not penetrate steel and concrete structures no matter how fast they are thrown at them. Very strange live videos were shot on 9/11, and I believe that the major networks that were covering the news were in sync with each other when the tower collapsed on television which I believe should never be the case. They should have been at least slightly out of sync.
Patrick M. Donahue
Philadelphia, PA
Education: Welder Training (WTTI) & some college
Patrick M. Donahue
Welder Training (WTTI) & some college
Philadelphia, PA
Certified welder & metallurgy/ engineer apprentice.
The destruction that happened in NYC on 9/11 defies all laws of physics.
Joseph C. Seonia
Philadelphia, PA
Occupation: Arc Welder
Education: High School
Joseph C. Seonia
High School
Philadelphia, PA
Occupation: Arc Welder
Welder at Budd Company-Currently Retired responsible for welding dies on a Auto Line.
As a welder retired or otherwise, Welding Materials like Iron, Steel, and Aluminum makes me somewhat knowledgeable about these different materials. No way, a Aluminum Airplane would cut through an Iron & Concrete Structure called the Twin Towers, World Trade Center.