The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Daniel Tinnelly, CEng
Structural Engineer
Dublin Institute of Technology
I have over 10 years experience in designing concrete and steel framed buildings. To date I have only seen the destruction the likes of that seen on the…
Daniel Tinnelly, CEng
Dublin Institute of Technology
Vancouver, BC, Canada
Occupation: Structural Engineer
Worked for 6 years in Ireland, where I gained my Chartered Engineers status. I worked primarily on the design of steel frame buildings. I took a huge interest in the fireproofing of these in the wake of 9/11 and quickly began to realise that this simply could not be the cause of the buildings collapse.Since leaving Ireland for Vancouver, BC, I worked as a project engineer for a large ports and marine design consultant.
I have over 10 years experience in designing concrete and steel framed buildings. To date I have only seen the destruction the likes of that seen on the 11th of September 2001 in a controlled demolition. I have experience with controlled demolition and it bears all the hallmarks of a controlled explosion, all three buildings.If it is the case that building 7 collapsed due to fire from office furnishings, why isn't there an immediate investigation into why our design/building codes are insufficient for buildings of this type. This is the most damning evidence off all in my opinion. If the claim that the fire from office furnishing created enough heat to melt steel then I'm afraid every steel framed office/residential building across the globe is at risk, with the high probability of significant loss of life.
Jason S. Attard
Specialist
B.S. Mechanical Engineering, Manhattan College
I believe the details surrounding the collapse of the twin towers and building 7 have been poorly investigated and/or falsified.
Jason S. Attard
B.S. Mechanical Engineering, Manhattan College
Astoria, NY
Occupation: Specialist
B. S. in Mechanical Engineering. Earned at Manhattan College in 2011. I have worked for Con Edison of New York for 8 years, holding various roles in various departments, two of which were engineering departments. The majority of my time there was spent analyzing real time transformer data and performing failure analysis for electrical equipment including transformers.
I believe the details surrounding the collapse of the twin towers and building 7 have been poorly investigated and/or falsified.
Brandon C. Davis
B.S., Mech. Engineering, LeTourneau U.
From and engineering standpoint, I believe the most powerful evidences against the official theory are as follows: 1) Molten and glowing steel under all 3 piles of rubble…
Brandon C. Davis
B.S., Mech. Engineering, LeTourneau U.
Longview, TX
Academic: Graduated High school with 4.0 and honors. Graduated from LeTourneau University in Longview Texas with a degree in Engineering, Mechanical Concentration and GPA of 3.4. Some academic and professional experience with structural analysis and finite element analysis. Professional: Experience in the Oil and Gas industry. Currently serving as a project coordinator for a natural gas compressor packager company. Personal: I am a follower of Jesus Christ.
From and engineering standpoint, I believe the most powerful evidences against the official theory are as follows: 1) Molten and glowing steel under all 3 piles of rubble found months later. This would be impossible if the only thing burning were smothered remnants of office supplies and remnants of jet fuel which mostly burned off in the first few minutes. Temperatures of combustion of such an oxygen starved fuel could not even make steel glow. 2) The inability of the remnants of jet fuel and office supplies to provide sufficient heat to significantly weaken key structural members evenly to the point of failure. 3) The towers falling at near the acceleration of gravity into their own footprint. Even if the impacted floors somehow gave way due solely to fire, they certainly would not give way at the same time all around the structure. One side would have been weaker than another causing that side to fail first causing the upper structure to tip over imparting rotational momentum to the upper structure and shifting the CG away from the stronger side and onto the weaker side causing the weaker side to collapse faster... and so on until the tops of the buildings toppled over. There is no way an uncontrolled demolition would be so neat as these were. The mass and structure below the failure point would have absorbed enormous energy and momentum slowing the fall to significantly less than the acceleration of gravity. 4) Building 7 sustained minimal damage with only a few cool fires and its collapse has yet to be explained officially. 5) The many vertical structural members would have no cause to buckle and shear off at 45 degree angles. If the floors were to pancake as supposed, they would have had to shear off of the vertical supports leaving hundreds of feet of beams sticking up in the air. ...and I could go on...
Ross G. Maxwell, Architect
BS Arch, Cal Poly SLO 1977
Type 1 - fireproofed structural steel in buildings just would not melt and cause a controlled collapse in the manner shown as all three buildings did. The structural…
Ross G. Maxwell, Architect
BS Arch, Cal Poly SLO 1977
Costa Mesa, CA
30 yrs experience - custom residential and small commercial in Southern California
Type 1 - fireproofed structural steel in buildings just would not melt and cause a controlled collapse in the manner shown as all three buildings did. The structural steel beams and columns had spray fireproofing on it and the buildings had fire sprinklers. The collapse of these building is even more unlikely given the time it took from impact of the planes till collapse.
Melissa R. Venegas, PE
B.S. Arch Eng w/ struct emphasis, U Wyoming
As a professional engineer, I do not believe the official story regarding what led to the collapse of the WTC towers.
Melissa R. Venegas, PE
B.S. Arch Eng w/ struct emphasis, U Wyoming
Lakewood, CO
I hold a degree in Architectural Engineering with a structural emphasis from the University of Wyoming. I have been a working engineer for 7 years in the field of structural engineering. I have been a licensed professional engineer for 1-1/2yrs.
As a professional engineer, I do not believe the official story regarding what led to the collapse of the WTC towers.
Eric Hermanson
Software
B.S. Eng. Physics, M.S. Nuclear Engineer
It is clear from my own research into the matter that the government is not telling us the whole story about 9/11. This does not imply 9/11 was…
Eric Hermanson
B.S. Eng. Physics, M.S. Nuclear Engineer
Detroit, MI
Occupation: Software
I earned one degree in engineering physics, and a graduate degree in nuclear engineering.
It is clear from my own research into the matter that the government is not telling us the whole story about 9/11. This does not imply 9/11 was a government conspiracy, but it does mean that important facts are being withheld from a public that has a right to know them. I believe the focus should be on Building 7, which underwent a symmetrical collapse that did not account for the mass resistance of the vertical pillars that were designed to hold the building up in the first place.
Philip Taylor, PhD
PhD Systems Engineering
Building 7 and the Demolition Style Collapse are evidence of planned activity requiring extensive setup time and efforts.
Philip Taylor, PhD
PhD Systems Engineering
Indian Wells, CA
Retired Engineering Professor Specializing in Math Models for Decision Making in Industry
Building 7 and the Demolition Style Collapse are evidence of planned activity requiring extensive setup time and efforts.
Lawrence Boyer, Assistant Profes
Master of Science, St. Louis University
I did not know until today that a third building collapsed which was not hit by an airplane.
Lawrence Boyer, Assistant Profes
Master of Science, St. Louis University
Saint Louis, MO
1978 BS in Aerospace Engineering - worked for McDonnell Aircraft Co. in the stress department - then Flight Simulation - then Flight Test.
I did not know until today that a third building collapsed which was not hit by an airplane.
Bill Highland
Retired
Univ of Illinois, Univ. of Minnesota
After the initial shock was over, maybe a week or 2 after 9/11, I had a couple of immediate reactions: 1. The plane hit the building asymmetrically on…
Bill Highland
Univ of Illinois, Univ. of Minnesota
Morrison, CO
Occupation: Retired
B.S. Engineering in Geology, University of Illinois, 1973. M.S. in Hydrology, University of Minnesota, 1975. Started career designing and building dams for mining industry and de-watering of open pit mines. Founded GeoWest in 1986, an environmental cleanup company for refineries, chemical plants, and gasoline stations. Company acquired by Thermo Electron in 1997.
After the initial shock was over, maybe a week or 2 after 9/11, I had a couple of immediate reactions: 1. The plane hit the building asymmetrically on one side; if the structural steel failed, it should have toppled over to the side, impacted (not dropped) in a free fall. 2. What are the odds that could happen twice in a row? 3. No way a bunch of terrorists could have figured this out and pulled it off on their own. Early on, I saw the evidence provided by Dr Steven Jones and what the government did to him in response. That, coupled with the miraculous discovery of undamaged passports in the rubble hours after the collapse, and simultaneously a worldwide coordinated press coverage identifying the terrorists was enough to convince me that this was a pre-planned false flag. I have been aware of AE for 9/11 Truth since its inception. I will do what I can to raise public awareness and support.
Christopher D. Granger, BSc (Hons), Dip. Arch
BSC (Hons) Dip. Arch
There are so many flaws in the media biased 'published truth'. Ranging from the disappearance of 'indestructible' Black Box Recorders, the blatant demolition of WTC 7 (wrongly announced…
Christopher D. Granger, BSc (Hons), Dip. Arch
BSC (Hons) Dip. Arch
Bolton, Lancs, United Kingdom
Fully qualified Architect working in a multi disciplinary practice with a core staff of 50 people. Work ranging from '1-10m including schools, sports centres, swimming pools and large scale education centres for providing facilities for higher education.
There are so many flaws in the media biased 'published truth'. Ranging from the disappearance of 'indestructible' Black Box Recorders, the blatant demolition of WTC 7 (wrongly announced by BBC). However the collapse of the WTC 1&2 due to 'Fire' defies belief, both intuitively and professionally! This was a pre-emptive strike against the U.S people to perpetuate the feeling of fear and to justify 'The War on Terror' against foreign countries including, Iraq, Afghanistan, Palestine & eventually (sadly) Iran. In ending, if you end imperialism, you end terrorism.
Paul K. Trousdale, Structural Engin
M.S.S.E., U.C. Berkeley
I had always thought the 3rd building was destroyed to prevent unpredictable collapse.
Paul K. Trousdale, Structural Engin
M.S.S.E., U.C. Berkeley
Emeryville, CA
Chief Engineer with 22+ years experience.
I had always thought the 3rd building was destroyed to prevent unpredictable collapse.
Richard L. Rosen, AIA
Retired Architect (Emeritus AIA)
Bachelor of Architecture, Carnegie Tech, 1958
Having watched and read all of the testimony and evidence posted by Richard Gage over the past decade, I urge the Congress to create an independent commission to…
Richard L. Rosen, AIA
Bachelor of Architecture, Carnegie Tech, 1958
Rochester, NY
Occupation: Retired Architect (Emeritus AIA)
I earned by Bachelor of Architecture degree at Carnegie Tech (now Carnegie Mellon U.) in 1958, and a Master of Urban Design from Harvard University in 1961. I have been practicing ever since in the area of residential, multi-family, commercial and office design. I have been employed by Mark IV Construction Co. in Rochester NY since 1980.I have been a member of the American Institute of Architects, and licensed to practice architecture in New York since 1968.
Having watched and read all of the testimony and evidence posted by Richard Gage over the past decade, I urge the Congress to create an independent commission to fully investigate the collapse of the three World Trade Center buildings, and not to arbitrarily rule out any possible scenario or conspiracy that could have led to the patently false official NIST report. Testimony by the first-responders who observed and heard what they have reported were explosions, melting steel, and chemical traces which are not consistent with the theory that airplanes caused the fires and collapse of WTC I and II; and the full unedited free-fall photographic evidence of the collapse of WTC 7 should be included in their study. If Congress does not agree to this, then a public subscription for an independent analysis by distinguished experts from universities abroad should be undertaken.
Petition Signatories
Gavin Huhoff
Rodgau
Gavin Huhoff
Rodgau
Bachelor of Metal Production Technology and Operations (CCI)
When I just saw the condition of all the steel girders around the accident scene - obviously cut at a diagonal - it was enough evidence for me to not believe the official story. Such clean cuts on beams are not the result of a cleaning-up operation. All these steel girders are muted witnesses of thermite explosives.
Mattias Olsson
Ludvika, Sweden
Occupation: Cad-Drawer
Education: Bergsskolan
Mattias Olsson
Bergsskolan
Ludvika, Sweden
Occupation: Cad-Drawer
I Studied 4 years for a engineer degree in metallurgy and materials. I now make 3D models and schematics for steel products in the mining business.
It is obvious that the conspiracy theory called the 'official story' is a big lie and that false flag attacks have been used thousands of time in history to manipulate the public. But more and more people are opening their eyes to them now and that is good. The official story is against the laws of science and the truth must come to light, it simply can't continue like this or I'm getting really scared of our future.
David Lancaster
Coventry, United Kingdom
Occupation: Graphic Design
Education: HNC Mechanical Engineering
David Lancaster
HNC Mechanical Engineering
Coventry, United Kingdom
Occupation: Graphic Design
Alex A. Anderson
San Pablo, CA
Occupation: Union Sheet Metal Worker
Education: Applied Science Degree
Alex A. Anderson
Applied Science Degree
San Pablo, CA
Occupation: Union Sheet Metal Worker
I have 20 years experience in hi-rise building construction, HVAC fab and installation, metal roofs. I worked the 64 story Millennium Tower in San Francisco in 2008 , the highest so far, and many others.
I can see every day how a skyscraper is built. There is no way it could crumble like it was made of sand. Those buildings were full of explosives, and there's not enough energy in an airplane to do that kind of damage, is my opinion. That the official story of 9/11 is far from true, we need the truth and we need to punish the real perpetrators.
Russell A. Montgomery
Houston, TX
Russell A. Montgomery
Houston, TX
I am a member of the general public who would like to see a new investigation to happen.
There are too many questions and no real official answers.
Lee Dahle
Henderson, NV
Occupation: Retired
Education: BS Mechanical Engineering
Lee Dahle
BS Mechanical Engineering
Henderson, NV
Occupation: Retired
Born 1950, graduated UC Berkeley in 1975. Worked in Silicon Valley from 1976-1992. Moved to southern Nevada in 1992. Got involved with land development and construction of custom homes and commercial buildings. Retired from engineering in 2008.
Steel and concrete do not turn to dust at temperatures that were present. Additionally, the wasn't enough heat to bring down any of the builds. In my opinion, if the government can get away with this it can get away with just about anything it wants to do to us.
Jesse M. Ostapec
Chatham, ON, Canada
Occupation: Quality Engineer
Education: Fanshawe college
Jesse M. Ostapec
Fanshawe college
Chatham, ON, Canada
Occupation: Quality Engineer
The events of 9/11 shoulden't even be considered a conspericy theory. I have a passion for truth, and the events of 9/11 is still very relevant in our world today. The thing that inspired me to join ae911truth was the ballsy move of opening up monorail on ground zero. I see it as a slap in the the face to anyone who lost their life on that day. I remember watching 9/11 on the news the day it happened, and would love to see some sort of investigation into the events of that day, or at least building 7. The people of this contenent need to wake up, and understand that the real culprits of the tragity have never been brought to justice, or recognized. This is the first step and I want to help get the ball rolling.
Cristina Ponte
Wilmington, DE
Occupation: Metallurgical Engineer/Failure Analyst
Education: BS Materials Science & Engineering, Lehigh University, 2012
Cristina Ponte
BS Materials Science & Engineering, Lehigh University, 2012
Wilmington, DE
Occupation: Metallurgical Engineer/Failure Analyst
I graduated from Lehigh University Materials Science & Engineering Department in 2012. I have now spent 2 years working on failure analysis of all kinds of materials.
I believe in scientific evidence and we deserve a real investigation. They should be welcoming a debate and discussion if there is nothing to hide.
Bradley S. Walls
New Market, MD
Occupation: Iron Fabrication
Education: Trade School
Bradley S. Walls
Trade School
New Market, MD
Occupation: Iron Fabrication
Ten years of professional metalwork, working with structural builds(certified in MD for structural Spray Arc MIG weding process)
An easy route for explaining the track of the fall. A free fall destruction of a building is much like electricity, they take the path of least resistance. Controlled demolition is a strict design principle on keeping the structure within itself, a process of confinement when working especially within close bounds of other structures. What we saw on all three structures were the strict principles of controlled demolition.
Ric Hampsom
Atlanta, GA
Occupation: Metallurgical Engineer
Education: BS Materials Engineering & Metallurgy, University of Sheffield England, 1992
Ric Hampsom
BS Materials Engineering & Metallurgy, University of Sheffield England, 1992
Atlanta, GA
Occupation: Metallurgical Engineer
BS Materials Engineering and Metallurgy, University of Sheffield, England, 1992. Materials engineering has numerous courses on failure analysis and the properties and mechanisms of failure of materials.
I am focused on fact based evidence. Essentially steel and concrete do not fail in the way portrayed by the official reports. Failure of steel is ductile; it can soften and stretch, but doesn't fail like breaking glass unless extremely cold. A hydrocarbon fire (e.g. aircraft fuel) cannot produce enough energy to compromise an entire building. The building would have partially failed, and the lower unburnt floors would have provided a huge amount of resistance to collapse. The collapse certainly wouldn't have occurred at free fall speeds. Bottom line: Nanothermite? Explosives? Who knows. That's the point. A non-biased, open sourced investigation that actually includes the collapse of building 7 should be done. All computer models, assumptions and input data should be open to the public and subject to peer scrutiny. This is what is called 'science'. We could use a whole lot more of it. We need a truth and reconciliation commission. The people that died that day and are still dying deserve better.
Joe Mcvicker, AAS, AS
Spencer, IN
Occupation: Union Ironworker
Education: AAS App. Tech, AS Business Admin.
Joe Mcvicker, AAS, AS
AAS App. Tech, AS Business Admin.
Spencer, IN
Occupation: Union Ironworker
Structural Iron worker for 11 years. Graduated at the top of my class. Foreman for the last 7 years. Involved and trained in all aspects of steel building fabrication, construction, erection,and relevant metallurgy. Studied the case of Sept 11, since early 2002.
All evidence points to some form of controlled demolition. No questions about it. The lies are miles deep. This was the false flag event needed to begin the much needed 'war on terror'. The war on terror and the associated laws passed are essential to the coup' taking place in America. The U.S. constitution is being systematically deconstructed and made irrelevant. All because of a 'war on a tactic'. Just like the war on drugs, there is no real, known enemy. There is no end, just endless possibilities for further usurpation.
Pete Terpak, BSMET
Mountaintop, PA
Occupation: Business Consultant
Education: Penn State University
Pete Terpak, BSMET
Penn State University
Mountaintop, PA
Occupation: Business Consultant
I hold a BSMET from Penn State University. The disciplines that I have studied in theory, lab, and profession include metallurgy, truss design, strength of material, statics, dynamics, kinematic design, etc.. I wrote my senior thesis on creep deformation of materials.
Everything that I have viewed from both sides of this debate and countless documentaries convince me more and more every day that there is something wrong with the official explanation of events. Anyone who has a basic understanding of physics can look at any of the three building fall and know that is simply not possible at that rate. The explanation of the way that the towers fell (specifically the trusses failed) does not make sense to me as someone who has designed trusses.
Allen Whitehead
Elma, WA
Allen Whitehead
Elma, WA
I have a liberal arts bachelor degree in critical thinking.
I have reviewed many articles about the 911 attack and a lot does not add up, especially building 7.
Brian E. Debonee
Manchester, CT
Occupation: Machinist (Disabled Now)
Education: Some college
Brian E. Debonee
Some college
Manchester, CT
Occupation: Machinist (Disabled Now)
trades in: offset printing, small machine repair, machining, computer repair, and computer programming in Basic, and Quick Basic.
When the government got rid of the evidence, and denied everything, I knew then that America was and is a terrorist nation. I have no allegiance to this country anymore. 911 showed me how much our government cares about it's citizens. I now understand why Americans are detested all around the world. What can one say when they can not even trust their own government to safeguard them.
Keith M. Henley-Smith
Melbourne
Occupation: Research Manager
Education: degreed & licensed
Keith M. Henley-Smith
degreed & licensed
Melbourne
Occupation: Research Manager
Over forty years in the Electric steel-making industry as a Melting shop Manager and Technical Director, have developed steel grades and alloys. Now working in R&D in Matmor a unique metal producing technology.
"I recently watched a presentation on the History channel entitled ""the missing evidence."" It took the view that the whole thing was caused by two airplanes. I have never believed this, but I thought it was wise to watch another opinion by a leading Nuclear Physicist from the US and another expert from the UK. At first I was a bit unsure and that they may be some credibility to the 'Official NIST' version. As the experts got into their presentations it became obvious that they knew nothing at all about metals, in particular structural steels and aluminium. I have been employed in the Steel industry for over forty years and have made thousands of tonnes of Rebar grade on electric arc furnaces in the UK, Germany and Australia so I think I may know a bit about that stuff. I also know quite a lot about Aluminium melting and casting. When I heard what these two Experts had to suggest caused the failure of the twin towers I was staggered. How on earth can anyone who is supposed to educated in sciences come up with such rubbish? An interesting thing was that neither of them mentioned WTC7!"
Scott G. Murray
Sherwood Park, AB, Canada
Occupation: Non Destructive Testing Technician
Scott G. Murray
Sherwood Park, AB, Canada
Occupation: Non Destructive Testing Technician
Twenty years in the materials engineering and NDT sector; Fifty years on this planet.
Building Seven did not just fall down on its own . I have watched footage of this building and other buildings collapsing at near freefall speed into its own footprint and have no doubt whatsoever that this was a controlled demolition. The evidence is overwhelming.
Martin J. Mckinnie
North Ogden, UT
Occupation: Dental Technician
Martin J. Mckinnie
North Ogden, UT
Occupation: Dental Technician
Trained Dental Ceramist, with extensive knowledge in metallurgy, Cad-Cam technology and ceramics. 40 years experience and currently retired. Haven't been asleep since the Kennedy assassination.
Our whole corrupt government is now based on these lies. The truth must come out so we can start a new course and establish a true government for the people not corporations. These kind of lies have created a government that makes it impossible for honest government employee's cannot survive.
John E. Basford
Southampton, NY
Occupation: Engineer/Blacksmith
Education: Secondary Modern
John E. Basford
Secondary Modern
Southampton, NY
Occupation: Engineer/Blacksmith
I am predominantly a self educated man. I only took from school that which I needed from it. The ability to read, write and count.. All else, I deemed as propaganda. I have studied marine engineering, mechanical engineering, history and science on my own terms since leaving education. I have written a book and held multiple licences for different vehicles. I have some military training and extensive firearms experience.
9/11 was a highly complex, exquisitely orchestrated and scientifically technical operation carried out by extremely professional operatives. State of the art military equipment and highly competent personnel were employed to bring about the destruction of that which was engineered not to be destroyed. 19 barely trained Arabs who were not qualified to fly a single engine aircraft armed with box cutters performed maneuvers in airliners that would have made veteran combat pilots break out in a cold sweat and scored direct hits on their targets...? Yeah right!
Timothy A. Kotlensky
Houston, TX
Occupation: Professional Archaeologist
Education: MS
Timothy A. Kotlensky
MS
Houston, TX
Occupation: Professional Archaeologist
I am a professional archaeologist in the practice of cultural resources management. I am also an independent researcher of historic industrial sites and material culture with a focus on the history of iron- and steel-making.
I am interested in collaborating with other professionals to develop a physical and online archive of documents, reliable and vetted eyewitness testimonies, and artifacts associated with the destruction of WTC 1, 2, and 7 that demonstrate the likelihood that other, officially-unaccounted means were employed to destroy World Trade Center 1, 2, and 7 on 9/11. I believe that my experience as a professional manager of archaeological collections would be useful to these ends and would help further the goals of Architects and Engineers for 9/11 Truth.
Robert Joos
Wimbledon, ND
Occupation: Farmer
Education: HS
Robert Joos
HS
Wimbledon, ND
Occupation: Farmer
Lifetime experience with metal fabrication and repair of machinery.
Steel and concrete buildings cannot collapse into rubble from building fires, it's impossible.
Austin Whitehead
St Peters, MO
Occupation: Welding Student
Austin Whitehead
St Peters, MO
Occupation: Welding Student
I am a welding student and deal with melted steel everyday.
Towers don't just fall the way they did on 9-11. We are not getting the truth from the media or the government which is not uncommon today. The government and the government controlled media is trying to cover something up that should not be covered up.
Alberto Cubero
PalauSolita I Plegamans, Spain
Alberto Cubero
PalauSolita I Plegamans, Spain
Went to school in London till the age of 16. I've been working as an aluminum window and door installer for more than 20 years.
The evidence is overwhelming. 9/11 was NOT what we were told. The official version just doesn't make any sense. WTC 7, what made it fall like it did? The Twin Towers, blown to dust. By what action? The steel melted beams. How did they melt? How could these three buildings fall so fast, practically disintegrating on their way down? The world needs to know. The official version is obsolete.
Anthony T. Dibenedetto
Newbury, MA
Occupation: Machinist
Education: TRADE SCHOOL. SOME COLLEGE WORK.
Anthony T. Dibenedetto
TRADE SCHOOL. SOME COLLEGE WORK.
Newbury, MA
Occupation: Machinist
A machinist with 30 years experience. Starting from manual to C.N.C. systems. Experience working with various exotic materials ig. Stellite, molybdenum. inconel and more. Tool and die design including fabrication of components with tolerances of +,- .ooo1 in. 0.0025mm. fabrications' predominately for D.O.D.
I am aware of what slag produced via Thermite looks like.
Jason Lawless
Ayr, ON, Canada
Occupation: Teacher
Education: Post Secondary Degree
Jason Lawless
Post Secondary Degree
Ayr, ON, Canada
Occupation: Teacher
Canadian Welding Bureau Certified Structural Steel Welder, 3 YEARS Structural Welding and Cutting experience; BA Geography McMaster University; BEd Brock University; Minor in French
Official story contradicts irrefutable laws of physics.
Dennis Biswane
Grave, VT
Dennis Biswane
Grave, VT
Studied for several years in Met al. Service engineer.
False flag (controlled demolition) Obvious inside job.
Doug Mackerman
Phoenix, AZ
Doug Mackerman
Phoenix, AZ
I am a software engineer by trade and have studied metallurgy although not certified in any (structural) discipline.
I do not believe in the official explanation of the events of 9/11. I believe buildings 1, 2 and 7 were brought down by controlled demolition. I had visited WTC 2 several months prior to 9/11 and thought it odd that the elevators would not take me to all floors. At the time I believed that it was because the spaces were being built out, but now I believe that it would have been necessary in order to strategically place thermite charges. I believe a serious investigation is necessary.
Suzanne M. Klitgaard
Redding, CA
Suzanne M. Klitgaard
Redding, CA
A mother, wife, in school currently in Welding, Metallurgy, Fabrication. Was in Construction in my 20,s, the Food Industry in my 30,s. A truck driver in my 40,s. Now going to college to becoming a Certified Welder-Artist. Studying Herpetology as a hobby. Animal rescue from time to time. Working with Recovery people from time to time. on my spirituality.
911 has always had a BIG FAT question mark attached well before the Twin Towers and Building 7 came perfectly tumbling down. I am very matter of fact and blunt, leaving emotion as a secondary. In the 80,s is when my faith went south and questioned pretty much everything. Today I have come to understanding fear. The evidence is clear...right in front of my face. Why so many people are acting like lemmings boggle my mind. Education and awareness is key to doing something about the truth.It must be exposed. Uncovered. Investigated. The 911 event was in the making YEARS before it took place...
Ericah Thomas
Houston, TX
Occupation: Fabrication
Education: Associates degree. Certified welding inspector
Ericah Thomas
Associates degree. Certified welding inspector
Houston, TX
Occupation: Fabrication
For the past 12 years I've been directly involved in the fabrication of large scale industrial oilfield equipment. Specifically metallurgy and structural integrity, weldability, and compatibility of different grades steel.
On 9/11/2001 I was 15 years old. At the time I believed what I was told regarding the event. That 'bad guys' hijacked planes and crashed them into the towers causing them to collapse. However upon completing high school and college and entering the workforce I ended up in structural fabrication. After being surrounded by steel & fabrication for over a decade now, and conducting my own tests and experiments on fatigue and failure I've come to my own conclusion regarding the collapse of the two towers and WTC 7 which is seldom spoken about. I've researched the grades of steels used in the World Trade Centers construction, and found they were standard materials such as ASTM A36, and ASTM 242 among about 10 other grades. Knowing the yield point of the steel grades in question in addition to fact that melting point is around 2700F and that jet fuel burns at a maximum temp of 1500F, I can say with 100% certainty that it's physically and mechanically impossible that the steel was weakened to the point of collapse due to fire caused by the jet fuel weakening the steel beams (which were also coated with fire retardant). Granted plain Jane carbon steel and even HSLA steel can lose some of its strength at temperatures much lower than its melting point, but there were pools and rivers of molton steel. Fire just can't do that to steel. When we weld HSLA plate it had to be preheated for extended periods of time depending on the specific material. I'm talking about a propane rosebud placed an inch from the surface of a plate and burning at high temps for more than an hour just to prepare the piece for welding. Regarding WTC7, which I had never even heard of until about 3 years ago (thanks to AE911), it's unbelievably obvious that the building fell at free fall speed which would be impossible to do unless there were no lower floors adding resistance and slowing the fall. Meaning those lower floors of resistance had to have their structural support severed. At the very minimum the citizens of the United States, especially the victims and their families of 9/11 deserve an outside investigation of what really happened to the three buildings. I believe the two towers and building 7 are the only buildings in the history of modern construction that have been brought down due to fire.
Zachary Richards
Middleton, NS, Canada
Zachary Richards
Middleton, NS, Canada
Being a carpenter for some time and now a machinist, I have basic knowledge on structures and metallurgy. I have worked on and understand how large commercial buildings are constructed and built to be fire resistant and almost fireproof. With this knowledge I believe it is impossible that the Twin Towers and Building 7 were brought down due to fires.
It is quite clear that the three buildings on 9/11 were brought down in a controlled demolition. A proper and honest investigation on the events of 9/11 needs to be done so the world can know the truth.
Ryan Barnes
Muncie, IN
Ryan Barnes
Muncie, IN
Husband, father, worker. Know when I'm being lied to.
We were and are being lied to. It's quite absurd really that they think we are this gullible.
Thomas J. Sloane, CWI
Canyon Lake, TX
Occupation: Metallurgist, Welding Expert, Certified Welding Inspector, Struc
Education: University of Texas at San Antonio
Thomas J. Sloane, CWI
University of Texas at San Antonio
Canyon Lake, TX
Occupation: Metallurgist, Welding Expert, Certified Welding Inspector, Struc
Welding expert. AWS certified welding inspector. Structural Steel inspector (AWS D1.1). Metallurgist
I highly doubt the structural integrity of the buildings were heated beyond a yield point that would cause near free-fall speed of the towers' destruction.
Mark J. Smith
Braintree
Occupation: Mechanical Engineer
Education: student
Mark J. Smith
student
Braintree
Occupation: Mechanical Engineer
It's blatantly obvious that there was a huge '3rd wheel' involved in the destruction of the towers, sadly, I believe that the 3rd wheel was the US government.
Michael H. Bratonja
Mequon, WI
Michael H. Bratonja
Mequon, WI
45 years working steel and its alloys and some metallurgy and metalography classes in college.
A lot of nonsense. I know what happens with steel and have worked with it from its beginning as an ore to its final product.