The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Russell T. Connors, Registered Civil
BS, U C Berkeley
The evidence presented is quite believable and truly shocking. I hope a national investigation takes place.
Russell T. Connors, Registered Civil
BS, U C Berkeley
Santa Maria, CA
Retired Consulting Structural Engineer. Have designed many buildings and other types of structures.
The evidence presented is quite believable and truly shocking. I hope a national investigation takes place.
Reinhard Lauer, Dipl.-Ing.
Retired Telecommunications Engineer
BSc Engineering, Technical University of Berlin, Germany, 1976
There is sufficient evidence for the use of explosives, at least at WTC7. This item must be reconsidered! I have read about videos documenting the Pentagon attack. They…
Reinhard Lauer, Dipl.-Ing.
BSc Engineering, Technical University of Berlin, Germany, 1976
Oberursel, Germany
Occupation: Retired Telecommunications Engineer
Degree of 'Diplom-Ingenieur' from Technische Universit't Berlin in 1975 Employed by 'Deutsche Telekom AG' and retired since 2006
There is sufficient evidence for the use of explosives, at least at WTC7. This item must be reconsidered! I have read about videos documenting the Pentagon attack. They should be released to the public.
Thomas H. Epps
Architect
B Architecture & Design, Kansas State University, 1982
I believe the 9/11 events and the subsequent coverup were fully directed by many of the Bush 2 neo-cons and the extreme New American Century philosophy. The buildings…
Thomas H. Epps
B Architecture & Design, Kansas State University, 1982
Kirbyville, MO
Occupation: Architect
I received a Bachelors degree in Architecture and Design from Kansas State University in 1982 and am a licensed architect in MO and CO. I have 30 years experience in successful design/build projects consisting of commercial, industrial, educational, religious, and single/multifamily residential projects in the US.
I believe the 9/11 events and the subsequent coverup were fully directed by many of the Bush 2 neo-cons and the extreme New American Century philosophy. The buildings of 9/11 were brought down using controlled demolition techniques, without question! The American public needs to hear the real truth about 9/11!
Gerald E. Anderson, PhD
BS Engineering; Ph.D, Geog., Univ Minn.
Obvious from simple physics and materials properties that legitimate science is being discredited and/or suppressed, perhaps following the premise that America cannot handle the truth. This belief was…
Gerald E. Anderson, PhD
BS Engineering; Ph.D, Geog., Univ Minn.
Colorado Springs, CO
Graduated (w/ distinction) 1953, Inst. of Technology, 23 years of active duty U.S Army, retiring 1980 as LTC. Fifteen subsequent years as high school and community college science teacher.
Obvious from simple physics and materials properties that legitimate science is being discredited and/or suppressed, perhaps following the premise that America cannot handle the truth. This belief was recently reinforced by the 2011 campaign to memorialize this lie by the sending of scrap metal to towns throughout Colorado.
Mo Palmowski, PE
Engineering Consultant
BS Mechanical and Industrial Engineering, Clarkson University, 1977
I concur that WTC 7 resembled a controlled demolition. The complete, symmetric collapse of 3 buildings in one day is not plausible. The WTC 7 collapse was too…
Mo Palmowski, PE
BS Mechanical and Industrial Engineering, Clarkson University, 1977
Tolleson, AZ
Occupation: Engineering Consultant
BS Mechanical and Industrial Engineering, Clarkson University, 1977. I have worked primarily in the construction, licensing, design and operation of nuclear power plants. I'm a licensed engineer and a licensed contractor in Florida.
I concur that WTC 7 resembled a controlled demolition. The complete, symmetric collapse of 3 buildings in one day is not plausible. The WTC 7 collapse was too obviously a controlled demolition. I watched all the 9/11 scenarios unfold, live on major news networks throughout the day.
George Brandt, Computer Consult
B.S.E.E. University of Colorado 1966
I am familiar with explosions and their debris fields, being involved with 2 Titan Missile explosions. From the evidence available regarding the 9/11 twin towers, it is my…
George Brandt, Computer Consult
B.S.E.E. University of Colorado 1966
Broomfield, CO
Investigator of the 1963 Cape Kennedy FL explosion of a Titan Missile and was the engineer responsible for redesign of the Launch Bolt Firing System. Responsible for the Manufacture of the OSO-2 Satellite. It was so reliable it functioned for 6 years past the 6 month specification. Responsible for the Reliability and Availability of IBM's GPD products from 1966 thru 1998.
I am familiar with explosions and their debris fields, being involved with 2 Titan Missile explosions. From the evidence available regarding the 9/11 twin towers, it is my expert opinion that a fully funded investigation of all the evidence should be opened. There was a total destruction of 3 buildings in an explosive manner, as seen in the videos. We need to determine possible causes other than just the impact of 2 aircraft flying into the buildings. I also believe that a chemical reaction was required to melt steel, and note that traces of explosive chemicals have been found in the debris field.
Julie Dyer
United Airlines Flight Attendant
I demand my government reopens and investigates ALL evidence and ALL events surrounding 9-11.
Julie Dyer
Reston, VA
Occupation: United Airlines Flight Attendant
I am college educated women who since 1996 have worked as a flight attendant for United Airlines. As a working crew member on a Boeing 777, I was to fly San Francisco-Miami on the morning of Sept 11, 2001 and I demand to know the truth! My life has been severely changed, forever, since that fateful morning. I travel the world constantly and witness, firsthand, the devastating effects of 9-11 on all of our civil lifestyle and liberties. I agree with Benjamin Franklin, 'They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.'
I demand my government reopens and investigates ALL evidence and ALL events surrounding 9-11.
Kenneth A. Fiallos, PE
Electrical
BSE
I believe that something is seriously wrong with the Official 9/11 Investigation.
Kenneth A. Fiallos, PE
BSE
Seffner, FL
Occupation: Electrical
I am an Electrical Engineer consulting in Power, Lighting and Building Automation Systems.
I believe that something is seriously wrong with the Official 9/11 Investigation.
Chris B. Hills, BSEE
BSEE, University of Utah
There is so much physical evidence to dispel the official story. I join the call for an independent investigation.
Chris B. Hills, BSEE
BSEE, University of Utah
Syracuse, UT
I have worked 10 years as a sonar transducer engineer and have worked 3 years as an ultrasonic engineer currently designing ultrasonic fluid sensors for the medical field.
There is so much physical evidence to dispel the official story. I join the call for an independent investigation.
Edward Tsimerman, MA Arch
MA Arch
supports ae911truth.org.
Edward Tsimerman, MA Arch
MA Arch
Saint Louis, MO
masters of architecture from washington university in st. louis missiouri 2007.
supports ae911truth.org.
Carolyn Lovin
BS Mechanical Engineering
We really need to figure out how building 7 came down and dropped to the ground.
Carolyn Lovin
BS Mechanical Engineering
Portland, OR
BSME - CU Boulder, CO 1984 Worked as an engineer a few years. BS Computer Science - CSU Fort Collins, CO 1999
We really need to figure out how building 7 came down and dropped to the ground.
John T. Monte, PE
Civil Engoneer
B.S. Civil Engineering, Michigan Technological University, 1976
The cover-up is absolutely appalling. The truth must be exposed, and those responsible held accountable.
John T. Monte, PE
B.S. Civil Engineering, Michigan Technological University, 1976
Algonac, MI
Occupation: Civil Engoneer
1976 Graduate with Bachelor of Science in Civil Engineering; 1980 Licensed Professional Engineer; 1993 to Present -Owner of Project Control Engineering Inc., Civil Engineering & Surveying Firm
The cover-up is absolutely appalling. The truth must be exposed, and those responsible held accountable.
Petition Signatories
Zim Solo, CPEng.Mech, BE.Med, FIEAust, CPEng
Brisbane, QLD, Australia
Occupation: Mechanical Engineer
Education: Queensland University of Technology
Zim Solo, CPEng.Mech, BE.Med, FIEAust, CPEng
Queensland University of Technology
Brisbane, QLD, Australia
Occupation: Mechanical Engineer
Zim Solo (CPEng.Mech, BE.Med, FIEAust)Chartered Professional Engineer (CPEng) Fully Licensed Member of the Institute of Engineers Australia (IEAust)I have over 15 years in the construction and demolition industry, delivering $100M worth of large scale construction, mining and industrial projects in Australia, Canada and around the world.
The evidence and video footage clearly show a controlled demolition sequence. The molten metal, vaporised ends of structural beams, and the superheated vapour cloud after the demolition all buildings point towards the use of explosives.In my experience, the demolition of buildings is very difficult as everything is interconnected, and the do not just come apart or fall down.Tower 7 is also the biggest red flag, as no plane hit this building, and no mere office fire will cause a building made of steel and concrete to just collapse, unless it is done with explosives in a controlled demolition sequence, as can be seen in the video evidence.
Yan (Frank) Li
Sydney, NSW, Australia
Occupation: System Engineer
Education: UNSW
Yan (Frank) Li
UNSW
Sydney, NSW, Australia
Occupation: System Engineer
System EngineerSystem AdministratorAmateur UAV engineer & pilot
'Conspiracy theorists' think everything is cover-up? FALSE! We question everything, do our research, and come to conclusions that scare you.911 is one of the biggest Cons in human history. The truth has too be revealed.
Taymoor Marar
Lyon
Occupation: Hospital Construction Planning
Education: BS Electrical Engineering, University of Colorado Boulder
Taymoor Marar
BS Electrical Engineering, University of Colorado Boulder
Lyon
Occupation: Hospital Construction Planning
B.Sc. Electrical Engineering - University of Colorado Boulder. HPPS - London Business School. 10 year career at Stryker Corporation. Hospital construction.
Being of Jordanian origin, I have had a lifelong exposure to the other side of the media. Although bias may exist on both sides, I think the fact that the buildings went down at free fall rates raises a red flag. Also, the fact that the media pre-announced that 3 towers had been destroyed before it actually happened shows some kind of readiness for the event from the news channels sources.
Claudio A. Irizarry
Chatillo, PR, Puerto Rico
Occupation: Civil Eng
Education: RUM
Claudio A. Irizarry
RUM
Chatillo, PR, Puerto Rico
Occupation: Civil Eng
I AM FROM 1974 CLASS AND FROM THAT TIME I AM WORKING. MY SPECIALIZATION IS IN STRUCTURAL DESIGN.
I SAW ALL THE DOCUMENTALS AND EXPLANATION AND I AGREE WITH EVERYTHING.
Robert Zavodsky
Olomouc, Czech Republic
Occupation: Civil Engineer
Education: Degreed
Robert Zavodsky
Degreed
Olomouc, Czech Republic
Occupation: Civil Engineer
Christopher C C. Noyes
Tempe, AZ
Occupation: Public School Teacher
Education: BS Mechanical Engineering, Cornell University, 1984
Christopher C C. Noyes
BS Mechanical Engineering, Cornell University, 1984
Tempe, AZ
Occupation: Public School Teacher
BS Mechanical Engineering, Cornell University, 1984. I had 11 years experience in aerospace engineering, first as senior development engineer for Garrett Turbine Engine Company/Allied-Signal Corp/Honeywell. Then I was a technical service adviser with Chromalloy Gas Turbines, in the turbine support division. I also worked for Delta Airlines as an engine installation & thrust reverser engineer.
The story adhered to by the US government and the main/lame stream media is clearly faulty.
Dan Jensen, BS
Rochester, MN
Occupation: Engineer
Education: BS Mechanical Engineering with distinction, Iowa State University, 2006
Dan Jensen, BS
BS Mechanical Engineering with distinction, Iowa State University, 2006
Rochester, MN
Occupation: Engineer
BS Mechanical Engineering with distinction, Iowa State University, class of 2006. I currently work as a test engineer, McNeilus Companies, Dodge Center, MN
Anyone with a basic knowledge of physics knows that steel will crush aluminum, not the other way around. Even if the planes could have penetrated the buildings, the buildings would have tipped over like a tree, not fallen into their own footprint. The evidence is overwhelmingly against the official story. God bless you, Mr. Gage, for your work
Richard C. Walker, MS, BS
Palo Alto, CA
Occupation: Electrical Engineer
Education: BS Engineering & Applied Science, California Institute of Technology, 1982
Richard C. Walker, MS, BS
BS Engineering & Applied Science, California Institute of Technology, 1982
Palo Alto, CA
Occupation: Electrical Engineer
I have a BS in Engineering and Applied Science from the California Institute of Technology and an MS in Computer Science from Cal State Chico. I worked for 21 years designing high speed integrated circuits for gigabit rate data transmission at HP and later for Agilent Laboratories. I designed and hold the patent on the 64b/66b line code used in 10Gb/s ethernet backbone of the internet long haul network.
Whatever you think about towers 1 and 2, building 7 was only mildly damaged and it was not even hit by a plane. The fact that it fell in its own footprint, at near free-fall acceleration, can only be explained by the use of pre-planned explosives placed weeks in advance by someone cooperating with the building security. Given that the building was largely inhabited by government agencies, it is very hard not to conclude that 9/11 was a false flag, a 'new Pearl Harbor', designed to justify a fraudulent war in the middle east. If America is to retain any shred of legitimacy, it is essential that the truth about this event be uncovered and the perpetrators be punished.
Gil Danila
Castaic, CA
Occupation: Senior Technical Project Manager
Education: BS Civil Engineering, Mapua Institute of Technology, 1982
Gil Danila
BS Civil Engineering, Mapua Institute of Technology, 1982
Castaic, CA
Occupation: Senior Technical Project Manager
I have a BS in Civil Engineering from Mapua Institute of Technology in Manila, Philippines. Before moving to the US I was a licensed civil and structural engineer in the Philippines and I designed high rise buildings.
WTC-7 was brought down by carefully planned demolition. High rise buildings do not fall symmetrically without disabling all the columns all at the same time. You do not have to be an engineer or architect to build a sample prototype structure made of sticks and cartons to show that a symmetrical fall will not occur if all the columns are not removed at the same time. This was a carefully planned demolition and would have taken months ahead to implement.
Andreas Hedqvist
Den Haag, Netherlands
Occupation: Mechanical/Aerospace Engineer
Education: Royal Institute of Technology, Stockholm, Sweden
Andreas Hedqvist
Royal Institute of Technology, Stockholm, Sweden
Den Haag, Netherlands
Occupation: Mechanical/Aerospace Engineer
Trained in structural statics, dynamics and analysis. Experience from spacecraft structural design and testing.
There are too many gaps and flaws in the official story of 911. The twin towers did not have sufficient potential energy to crush the amount of material into micron sized dust as witnessed. WTC7 is a clear case of controlled demolition. The rate of collapse for all three towers is in and of itself enough to dismiss the so called pile-driver theory (gravity driven collapse). The official explanation is hence obviously wrong and a new proper investigation is needed.
David Jensen, BASc, LL.B., MBA
Vancouver, BC, Canada
Occupation: Mining Executive
Education: BASc Mechanical Engineering, University of Waterloo, 1982
David Jensen, BASc, LL.B., MBA
BASc Mechanical Engineering, University of Waterloo, 1982
Vancouver, BC, Canada
Occupation: Mining Executive
BASc Mechanical Engineering, University of Waterloo, 1982. LL.B. Law Degree, University of Calgary, 1997. MBA, University of British Columbia, 1999.
I want to see a proper public investigation using panel members who are technically competent.
Franklin D. Lemkey, PhD
Palm Beach Gardens, FL
Occupation: Consulting Engineer
Education: BSE Metallurgical Engineering, University of Michigan-Ann Arbor, 1960
Franklin D. Lemkey, PhD
BSE Metallurgical Engineering, University of Michigan-Ann Arbor, 1960
Palm Beach Gardens, FL
Occupation: Consulting Engineer
BSE 1960 Metallurgical and Chemical, University of Michigan; DPhil 1974 University of Oxford England. Retired Fellow United Technologies Research Center. 1960-2000 Director of Commercialization USIC; 2001 Founded Joint Turbine Coating Co PW- Paton Kiev Ukraine; 1992-2014 Consulting Scientist; 2001-2018 International Center for Electron Beam Technology Ukraine Academy of Science. Kiev Adjunct Professor Thayer School Dartmouth College Visiting Professor Engineering UCONN
Did research on nano Al/FexO etc nano layers produced by physical vapor deposition for Joining applications and former student at Dartmouth. After completing his PhD formed a company to produce nano composites. It was immediately obvious from examination of dust from all three towers that nano materials were used to damage the floors after aircraft impact resulting in smoke clouds of Al2O3 + micron spherical Fe particles. Also the supporting columns were cut using nano thermite.
Patrick Rossi
Oceanside, CA
Occupation: Owner/Engineer
Education: BS Chemical Engineering, Michigan Technological University, 1982
Patrick Rossi
BS Chemical Engineering, Michigan Technological University, 1982
Oceanside, CA
Occupation: Owner/Engineer
BSCHE Michigan Technological University. MSMIS University of Missouri - St. Louis. I'm the owner of Patronus LLC, a process automation consultancy specializing in the biotech industry.
"There are enough overwhelming and compelling discrepancies in NIST's ""9/11 Final Report"" to warrant an immediate, government-independent investigation into the bringing down of the three World Trade Center buildings."
Kenneth N. Sherman
Austin, TX
Occupation: Electrical Engineer
Education: MS Electrical Engineering, University of California Los Angeles, 1982
Kenneth N. Sherman
MS Electrical Engineering, University of California Los Angeles, 1982
Austin, TX
Occupation: Electrical Engineer
I have 30 years experience in communication satellites and radar design and analysis. Bachelor and Master of Science, Electrical Engineering. Member of IEEE.
It is obvious to me that all 3 WTC towers were brought down by controlled demolition. Steel skyscrapers don't collapse symmetrically at free-fall unless deliberately prepared to do so. The official explanation of office fires cannot be true. If such fires could bring down a steel skyscraper, would anyone ever feel safe in one, or set foot in one again? The destruction of evidence and lack of a real forensic investigation make me very suspicious. Somebody got away with murder. Who? and Why? I support and applaud the efforts of ae911truth.org and believe that once Americans learn the facts presented here they will demand an independent forensic investigation into this matter - probably the single most important event in the history of the USA.
Michael C. Davis
Auburn, CA
Occupation: Cad/Bim Designer
Education: BS Engineering Technology, California State University Sacramento, 1989
Michael C. Davis
BS Engineering Technology, California State University Sacramento, 1989
Auburn, CA
Occupation: Cad/Bim Designer
I graduated in 1989 from California State University, Sacramento with a BS in mechanical engineering technology. I've helped design and create plans for water/wastewater plants for HDR Engineering for 16 years.
I've actually done the math: an analysis of Building 7 collapse acceleration. The standard kinematic equations were used to compute the speed of the building collapse. Note that these equations don't take many 'real-life' factors into account, such as air resistance, friction, and temperature. They are used to compute a theoretical 'ideal case' for use in the lab. Known data: g = 32.2 ft/s^2 (acceleration of gravity) d = 610 ft (height of bldg 7) vi = initial velocity (zero since bldg was at rest) vf = final velocity (in a vacuum) t = 6.5 seconds (elapsed time of collapse of bldg 7, according to picture found here: http://buildingwhat.org/wptemp/wp-content/uploads/2010/08/wtc7_collapse.jpg). Mathematical symbols used below: / = division ^ = exponent (ie; ^2 means squared) ( ) = multiplication. EXERCISE: Find percent of bldg 7 acceleration compared to free fall. Final velocity (using 3rd equation above) after 6.5 seconds: vf = 0 + 32.2(6.5) = 209.3 ft/sec. Now we can use vf in the 4th equation to get the distance something would travel in a vacuum. If this is close to the actual bldg height, this means that bldg 7 fell quickly, with relatively little restriction, like a controlled demolition would. d = vi + vf/2(t)d = 0 + 209.3/2(6.5)d = 680.2 ft. The percent change between the bldg height and free fall height is: %change = old value ' new value/old value(100). %change = 680.2 ' 610/680.2(100). %change = 10.3%. SOLUTION: Building 7 fell at 100% - 10.3% = 89.7% of free fall acceleration. CONCLUSION: Building 7 fell at roughly 90% of free fall acceleration. This seems like a high percentage for a large modern structure that was supposedly still being held up by structural steel beams and/or reinforced concrete columns. Mike Davis, 11/27/2010
Norman E. De Silva
Randallstown, MD
Occupation: Mechanical Engineer
Education: Master of Engineering, Howard University, 1987
Norman E. De Silva
Master of Engineering, Howard University, 1987
Randallstown, MD
Occupation: Mechanical Engineer
I have a Masters degree in Mechanical Engineering (Classical Mechanics) from Howard University (1987), and a BS degree in Mechanical Engineering from Tuskegee Institute (1984). I have more than 20 years professional experience performing tasks in specialized fields such as reliability engineering, structural engineering, mechanical engineering, stress analysis, operations research, modal testing of rotating equipment, software testing, and acquisition program management for D.O.D.-sponsored major information systems.
The explanations provided by NIST regarding the World Trade Center skyscraper collapses on 9/11 defy the laws of Newtonian Physics and structural engineering. Building 7 had all the markings of a controlled demolition due to the symmetric quality of the whole free-falling structure.
Andrew L. Sellars, MS, BS
Mesa, AZ
Occupation: Rretired
Education: BS Aerospace Engineering, University of Arizona, 1971; MS, University of Arizona, 1974
Andrew L. Sellars, MS, BS
BS Aerospace Engineering, University of Arizona, 1971; MS, University of Arizona, 1974
Mesa, AZ
Occupation: Rretired
B.S. Aerospace and Aeronautical Engineering in 1971; M.S. Mechanical and Environmental Engineering in 1974. I performed thermal and structural engineering in the aerospace electronics industry for 22 years; I then performed structural engineering of commercial buildings for 4 years including multi-storied condo complexes and the Phoenix Zoo's new orangutan exhibit.
All the evidence needs to be looked at because the 'official' explanation doesn't fit the free fall of building 7 and the near free fall of towers 1 and 2. Why was there little or no structural resistance from the lower floors when the buildings came down?
Brad J. Weber, BS
Chandler, AZ
Occupation: Network Engineer
Education: BS Electrical Engineering, Louisiana State University, 1991
Brad J. Weber, BS
BS Electrical Engineering, Louisiana State University, 1991
Chandler, AZ
Occupation: Network Engineer
I have been in the telecom, information technology & network support industry for over 20 years. I have a BS in Electrical Engineering from LSU which is where I started my career after graduating in 1991. My background includes project management, network design, audit analysis, router configuration and troubleshooting, cabling infrastructure, optical networking & network management.
Though my degree is in electrical engineering and I work in information technology, I have done quite a bit of online research into the 'official' 911 story and have found overwhelming evidence that it just does not make any sense. Concrete and steel buildings don't come down in free fall without an accelerant such as nano-thermite. It is time for those who conspired to commit these atrocities against thousands of innocent American citizens to come clean and pay the price. The American people deserve to know the truth!
Peter T. May-Ostendorp, PhD
Durango, CO
Occupation: Consultant
Education: PhD Civil Engineering, University of Colorado Boulder, 2012
Peter T. May-Ostendorp, PhD
PhD Civil Engineering, University of Colorado Boulder, 2012
Durango, CO
Occupation: Consultant
I am a Ph.D. civil engineer and an expert on energy efficiency issues as they apply to building mechanical systems and various electrical end uses.
I have waited too long to embrace what I have known to be true: that the official 9/11 investigation was a sham and that key forensic evidence has been withheld from the American public.
Enrique E. Bruque, BS
Fresno, CA
Occupation: Engineer (Retired)
Education: BS Civil Engineering, Oregon State University, 1973
Enrique E. Bruque, BS
BS Civil Engineering, Oregon State University, 1973
Fresno, CA
Occupation: Engineer (Retired)
I am a civil engineer by education and practice and a mechanical engineer by practice. I have planned, designed and managed the construction of structural frames and foundations for oil refinery towers and pressure vessels. I'm also experienced in hydraulic systems (pipelines and piping systems) and municipal infrastructure systems.
I would like to know more about the reasons for the collapse of the WTC towers. I saw them collapse on September 11 and to me it did not seem to result from the impact of the planes or from the subsequent fire.
William E. Dumke, MS
Green Bay, WI
Occupation: Rf Design Engeineer
Education: MS Electrical Engineering, University of Wisconsin Madison, 1972
William E. Dumke, MS
MS Electrical Engineering, University of Wisconsin Madison, 1972
Green Bay, WI
Occupation: Rf Design Engeineer
Master of Science Electrical Engineering 1972 UW Madison, RF, Microwave, Millimeter Wave Design Engineer at Motorola Communications Research, Very Large Array Radio Telescope Project, Sandia National Laboratory Radar Organization, Motorola Government Aerospace, and Cellcom, Cellular Provider. Retired in 2013.
The US Government should release the technical details of their investigation into the World Trade Center collapse of Building 7, since the Architects and Engineers for 9/11 Truth have already released all of the details of their investigation of the collapse of Building 7.
Renato Moscardini
Boncourt, Switzerland
Occupation: Automation Mnager
Education: HTL/ETS/STS Bienne
Renato Moscardini
HTL/ETS/STS Bienne
Boncourt, Switzerland
Occupation: Automation Mnager
1985 ' High frequency transmissions research & development1989 ' Teach Electrical Engineering1992 ' Electrical & Automation engineer on ' international food manufacturing. Specialised in Automation and IT on production machines and product flows.
I understand my specialisation is not in line with buildings construction but I am able to understand and use basics physical laws. For these reasons, I support your movement and wish you plenty of success.In clear, I totally agree the position of controlled demolition as the AE911 arguments and evidences.
Razvan Vacaru, BEng
Pesaro, Italy
Occupation: Sw Developer
Education: Università di Bologna
Razvan Vacaru, BEng
Università di Bologna
Pesaro, Italy
Occupation: Sw Developer
I'm a 23 years old italian boy, I got my B.Eng degree in Computer Science in December 2013, so I don't consider myself a big engineer. I now work in Turin for an international IT consulting Company: Alten. It's just my 6th month of work
I agree with your point of view, I don't think there's so much to say...
Alessandro Argentini
Rijswijk, Netherlands
Occupation: Retired European Patent Office
Education: Bachelors Degree Aeronautical Engineering, Pisa University, 1974
Alessandro Argentini
Bachelors Degree Aeronautical Engineering, Pisa University, 1974
Rijswijk, Netherlands
Occupation: Retired European Patent Office
My license was granted in 1974 for:Ordine degli Ingegneri provincia di PISA (Italy), N. 627 Sezione A (Civile, Ambientale,Industriale, dell'informazione) Aeronautical Engineering Degree at Pisa University, 1974. Assistant Istituto di Macchine (Fluidica), Pisa University, 1974. Patent examiner at European Patent Office 1981-84.Consultant on digital military system testing equipment, O.T.O. Melara, 1984 - 85. Consultant on logistic and maintenance of Air Traffic Control systems, A.A.V.T.A.G., Rome 1985-86.Patent examiner at European Patent Office.
The official version is physically incompatible with images broadcast on 9/11.
Roy Y. Taylor
Scottsville, NY
Occupation: Mechanical-Optical Engineer
Education: BS Mechanical Engineering, University of Rochester, 1961
Roy Y. Taylor
BS Mechanical Engineering, University of Rochester, 1961
Scottsville, NY
Occupation: Mechanical-Optical Engineer
I worked for Bausch and Lomb, Management & Technology Inc, and Eastman Kodak Company (both federal systems and commercial products). After retiring from Kodak I worked for a couple of small companies developing and making digital cameras. Then I started a new business with another engineer within Kodak making 3 dimensional images. I'm currently working on contract basis to help inventors learn how to patent their own inventions, help them make prototypes, and do patent searches. I am also working with another company to sell patents for licensing opportunities.
I was unaware of Bldg 7 for several years until my daughter told me about it. I had heard it was a controlled demolition due to the damage inside from fires started from the twin towers. However, I have grown increasingly skeptical about the planes causing the collapse of the twin towers because I could not see that damage causing the collapse of the floors below it. The outside materials peeling away from the structural steel were also unexplained. I would have thought the buildings would have collapsed more laterally in the direction of the impact points. I saved the Washington Journal interview with Mr. Gage to show my daughter and have decided to sign the petition.
Michela Talo, PhD
San Marzano Di S G, Italy
Occupation: PhD
Education: PhD Structural Engineering, Sapienza University, Rome
Michela Talo, PhD
PhD Structural Engineering, Sapienza University, Rome
San Marzano Di S G, Italy
Occupation: PhD
MS Civil Engineering, Columbia University (New York), 2011. MS Civil Engineering, Sapienza University of Rome, 2012. PhD Structural Engineering at Sapienza University of Rome.
I think the provided official version about 9/11 events lacks information and relevant details about the way in which the three WTC skyscrapers have collapsed.
William C. Dumper, BEE, MEE
Amityville, NY
Occupation: Retired
Education: BEE and MEE, Polytechnic Institute of Brooklyn, 1952 and 1953
William C. Dumper, BEE, MEE
BEE and MEE, Polytechnic Institute of Brooklyn, 1952 and 1953
Amityville, NY
Occupation: Retired
I hold bachelors and masters degrees in electrical engineering from the Polytechnic Institute of Brooklyn. I have 30 years experience in building power plants, both nuclear and fossil fuel types. My last position was as chief electrical engineer for Gibbs and Hill, Inc., an architectural and engineering firm. Although I was an electrical engineer, my position required interfacing and knowledge of mechanical and structural engineering concepts in the complex design and construction of power plants.
The whole government investigation is a hoax and fraud. This was a planned demolition of all 3 buildings and the truth has to be made public.
Kyle A. Nobes
Granby, MA
Occupation: Project Engineer
Education: BS Industrial Engineering, Western New England University, 2014
Kyle A. Nobes
BS Industrial Engineering, Western New England University, 2014
Granby, MA
Occupation: Project Engineer
I have a BS in Industrial Engineering from Western New England University in Springfield MA. I work as a project engineer in the medical device field.
It's pathetic that the government gave us such a lame excuse as to why those buildings fell. How can office fires melt steel? And how can jet fuel melt steel? They can't.
Leslie Schlag, PhD
Erfurt, Germany
Occupation: Male
Education: TU Ilmenau
Leslie Schlag, PhD
TU Ilmenau
Erfurt, Germany
Occupation: Male
11/2013 till now: Scientist / Ph.D. student in the field of Locallized athmospheric pressure plasma deposition / Nanoxerography11/2013 Master of Science in Micro- and Nanotechnology05/2012 Bachelor of Engineering in Photovoltaics and Semiconductortechnology
To many questions, to less answers... To fast deconstruction - no full investigation. The 911 commission failed!
Nicholaus Thompson
Kuna, ID
Occupation: Mechanical Design Engineer
Education: BS Mechanical Engineering, Boise State University, 2010
Nicholaus Thompson
BS Mechanical Engineering, Boise State University, 2010
Kuna, ID
Occupation: Mechanical Design Engineer
I have a bachelors degree in mechanical engineering and applied mathematics.
Math and physics do not lie. These are universal laws that hold true, and do not change based upon ones opinion.
William Beiriger
Munster, IN
Occupation: Electrical Engineer
Education: BS, Purdue University, 1969
William Beiriger
BS, Purdue University, 1969
Munster, IN
Occupation: Electrical Engineer
I support a new investigation.
Andreas Apostolopoulos
Erie, PA
Occupation: Civil Engineer
Education: BE Civil Engineering, City College of New York, 2013
Andreas Apostolopoulos
BE Civil Engineering, City College of New York, 2013
Erie, PA
Occupation: Civil Engineer
I graduated with a degree in civil engineering in 2013, and have been working in structures at General Electric ever since.
My belief is that the version of the collapse which the government gives us clearly denies the evidence as well as the laws of physics. An independent investigation is required, with all evidence available to the public, in order for the truth to be determined.
Peter Bick, EIT, BSEE, MSEE, MBA
Tega Cay, SC
Occupation: Consultant
Education: BS and MS Electrical Engineering, University of New Hampshire, 1998 and 2000
Peter Bick, EIT, BSEE, MSEE, MBA
BS and MS Electrical Engineering, University of New Hampshire, 1998 and 2000
Tega Cay, SC
Occupation: Consultant
EIT; BSEE, University of New Hampshire; MSEE, University of New Hampshire; MBA, University of South Carolina.
The towers fell at nearly free fall speed; it looks like a controlled demolition.