The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Jonathan Smolens, PE
BS CU Boulder
As with any doubt on any subject as large as this it should be thoroughly investigated.
Jonathan Smolens, PE
BS CU Boulder
Boulder, CO
I have been a structural engineer for 11 years. One of my specialties is forensic engineering.
As with any doubt on any subject as large as this it should be thoroughly investigated.
Mark W. Wonner
Architect
California State University at San Luis Obispo
No properly engineered tall building has ever collapsed due to fire or any other reason apart from controlled demolition. Let the truth be known and the perpetrators be…
Mark W. Wonner
California State University at San Luis Obispo
Cardiff, CA
Occupation: Architect
I attended California State University at San Luis Obispo. I was licensed as an architect in 1990. I've been in private practice since 1978.
No properly engineered tall building has ever collapsed due to fire or any other reason apart from controlled demolition. Let the truth be known and the perpetrators be summoned to account for their actions.
Michael Fillion
Structural Engineer
Northeastern
The collapse of WTC 7 appeared to be a planned demolition.
Michael Fillion
Northeastern
Sharon, MA
Occupation: Structural Engineer
I'm a licensed structural engineer in Massachusetts.
The collapse of WTC 7 appeared to be a planned demolition.
Daniel Tinnelly, CEng
Structural Engineer
Dublin Institute of Technology
I have over 10 years experience in designing concrete and steel framed buildings. To date I have only seen the destruction the likes of that seen on the…
Daniel Tinnelly, CEng
Dublin Institute of Technology
Vancouver, BC, Canada
Occupation: Structural Engineer
Worked for 6 years in Ireland, where I gained my Chartered Engineers status. I worked primarily on the design of steel frame buildings. I took a huge interest in the fireproofing of these in the wake of 9/11 and quickly began to realise that this simply could not be the cause of the buildings collapse.Since leaving Ireland for Vancouver, BC, I worked as a project engineer for a large ports and marine design consultant.
I have over 10 years experience in designing concrete and steel framed buildings. To date I have only seen the destruction the likes of that seen on the 11th of September 2001 in a controlled demolition. I have experience with controlled demolition and it bears all the hallmarks of a controlled explosion, all three buildings.If it is the case that building 7 collapsed due to fire from office furnishings, why isn't there an immediate investigation into why our design/building codes are insufficient for buildings of this type. This is the most damning evidence off all in my opinion. If the claim that the fire from office furnishing created enough heat to melt steel then I'm afraid every steel framed office/residential building across the globe is at risk, with the high probability of significant loss of life.
Ehlert H. Puvogel, Diplom Geologe
Geologie
Diplom Geologe, Ludwig-Maximilians-Unive
Why showed the 47 columns core of WTC 1 + 2 no resistance, fell down in free fall speed? I think some minutes before the collapse they were…
Ehlert H. Puvogel, Diplom Geologe
Diplom Geologe, Ludwig-Maximilians-Unive
Berlin, NH
Occupation: Geologie
I am 64 years old, studied Geology in Munich, Germany, worked as an Geologist in the Alps, in Italy and Austria and in tunnel building in Germany. Now I am author and have a little publishing firm.
Why showed the 47 columns core of WTC 1 + 2 no resistance, fell down in free fall speed? I think some minutes before the collapse they were weakened. The unknown commander in the 'Giuliani bunker' in the 23rd story of WTC 7 pressed the knob and ignited in the deep basement, at the contact granite to core columns, the brought down nanothermit. It smoothed the 47 steal columns over 2 - 3 basement stories. Temperatures over 1200 grad of Celsius development. Mr. Rodriguez, the janitor of the twins, described a man, who flee from the basement heat to the surface. His skin was burned, fell from his arms undo face. The melting of the core column feet caused a total change of the tower static. Now the steal columns which were calculate for pressure stress had to bear pull stress. They hang in the air, because their feet were molten, building liquid steal pools. Weld seams opened, 10 000 of bolts elongated and ripped out together with nuts and flanges. A sudden explosion fulfilled with their shaking the work of destroying the connections. Now the 260 outer square columns had to bear the whole load of the tower, the core columns and ceilings with the concrete floors. WTC 2 was ready for destroying. At the 'explosion cut' high above nanothermit melted the 260 outer columns symmetrically.Two or three minutes before the south tower fell one could see molten steal at a corner of this cut spraying down. Here the 'destructiveness' didn't work properly! By the big explosion the upper part of the tower was lifted and fell like a hammer at the core. Further explosions, tatted with the fall velocity, take place, 'scrumps' came out of the broken windows. Several mushroom formed 'fly parabolic curves' of the tower debris showed that there were two powers working: gravity and the centrifugal explosion power. Every physicist who saw this, can interpret this only in one way: controlled demolition by explosives.
Anthony N. Lusich
Geotechnical Engineer
BS Civil Engineering, University of Southern California, 1975
There are enough questions being raised about the events on 9/11 in New York, Washington DC and Pennsylvania that a new investigation is appropriate. There are numerous question…
Anthony N. Lusich
BS Civil Engineering, University of Southern California, 1975
Ramona, CA
Occupation: Geotechnical Engineer
I earned a Bachelor's Degree in Civil Engineering in 1975 and was registered in California as a civil engineer in 1978. I was registered as a geotechnical engineer in California in 1988. My practice has predominately been limited to geotechnical engineering. I have worked on numerous residential, commercial, education, transportation, oilfield, water related projects.
There are enough questions being raised about the events on 9/11 in New York, Washington DC and Pennsylvania that a new investigation is appropriate. There are numerous question that this group, and others have raised. The rebuttals that I have seen have often been vague and have not addressed the specific point that was being raised. These rebuttals have left me uneasy about the 'official' story.
Dan S. May
Engineer
BS Civil Engineering, Marquette University, 1990
One of the government's most commonly stated missions is to protect its citizens. Regarding 9/11, this duty would certainly include understanding the true root cause of the destruction…
Dan S. May
BS Civil Engineering, Marquette University, 1990
Racine, WI
Occupation: Engineer
BS Civil Engineering, Marquette University, 1990. MBA, DePaul University, 2013.
One of the government's most commonly stated missions is to protect its citizens. Regarding 9/11, this duty would certainly include understanding the true root cause of the destruction in New York City that day...for all three buildings. For NIST and the government to assume that combustion of office materials in a small area of the building caused the symmetrical collapse of Tower 7 is simply irresponsible. It also demonstrates absolute neglect in their duty to protect its citizens from attack. If terrorists could fly planes into WTC 1 and 2, could they not have wired tower 7 for demolition? Shouldn't we be absolutely sure that's not what happened? Looking at the collapse, nobody can deny that it appears to be controlled demolition. So the next question is, who wired the building? The refusal by NIST to test for residues of explosives is beyond belief.
Steven Henry
Electrician
student
I know eyewitnesses who heard explosions and basement in the lobby at the time the 1st plane hit one of the buildings. Also how the New York police…
Steven Henry
student
Orlando, FL
Occupation: Electrician
Student, full-time worker, citizen researcher on current events in the US and worldwide.
I know eyewitnesses who heard explosions and basement in the lobby at the time the 1st plane hit one of the buildings. Also how the New York police who started to investigate became instant millionaires to stop them from talking.
Toby M. Menard
Engineer
BS Mechanical Engineering, University of Louisiana Lafayette, 2016
Unbelievable. I've been shocked by the ignorance from the public in addressing obvious shortcomings in the NIST report. Also, I am disgusted at academia's willingness to accept the…
Toby M. Menard
BS Mechanical Engineering, University of Louisiana Lafayette, 2016
Lafayette, LA
Occupation: Engineer
BSME University of Louisiana, 2016. I'm a maintenance professional and US Navy veteran. I'm currently in the oil and gas industry with an oil well service company.
Unbelievable. I've been shocked by the ignorance from the public in addressing obvious shortcomings in the NIST report. Also, I am disgusted at academia's willingness to accept the official narrative without question.
Mark D. Crane, FITE
President-Traffic Engineering Company
BS Civil Engineering, Purdue University, 1972; MS Civil Engineering, University of California, Berkely, 1974
Mark D. Crane, FITE
BS Civil Engineering, Purdue University, 1972; MS Civil Engineering, University of California, Berkely, 1974
Elk Grove, CA
Occupation: President-Traffic Engineering Company
BS Civil Engineering, Purdue University, 1972; MS Civil Engineering, University of California, Berkely, 1974. Traffic engineer for various firms 1975 -1980. Principal - Goodrich Traffic Group 1980-1990. President Crane transportation Group 1990 to presentMember - ASCE Fellow - Institute of Transportation EngineersTau Beta Pi and Chi Epsilon members
Gregory L. Flynn, PhD, DA
Retired
DA Rhetoric, Univ of Michigan
You can either believe the official government conspiracy theory (which most people do since that is what the media tells them) or you can believe the scientific explanation…
Gregory L. Flynn, PhD, DA
DA Rhetoric, Univ of Michigan
Boston, MA
Occupation: Retired
B.A. Washington University (St. Louis) (Political Science)M.A. Columbia University (English) Ed.M. Teachers College, Columbia (English Education) M.A. New York University (Spanish), M.A. Middlebury College (German), D.A. University of Michigan (Rhetoric), Active in Boston 9/11 Truth and other progressive activities.
You can either believe the official government conspiracy theory (which most people do since that is what the media tells them) or you can believe the scientific explanation of why the 3 buildings collapsed. The collapse of Building 7 in 6 seconds (not hit by an airplane) means the building had to be brought down by controlled demolition. This is thoroughly corroborated by eyewitness reports from reporters, firefighters, police officers, etc. that frequent bomb explosions were heard by those in or near the buildings.
Sarah Hall
Electrical Engineer
Bachelor of Science, Electrical Engineering, San Jose State University, 2012
A building cannot free fall without demolition work done.
Sarah Hall
Bachelor of Science, Electrical Engineering, San Jose State University, 2012
Livermore, CA
Occupation: Electrical Engineer
I am an electrical engineer with a strong understanding of physics and mathematics.
A building cannot free fall without demolition work done.
Petition Signatories
Christopher C C. Noyes
Tempe, AZ
Occupation: Public School Teacher
Education: BS Mechanical Engineering, Cornell University, 1984
Christopher C C. Noyes
BS Mechanical Engineering, Cornell University, 1984
Tempe, AZ
Occupation: Public School Teacher
BS Mechanical Engineering, Cornell University, 1984. I had 11 years experience in aerospace engineering, first as senior development engineer for Garrett Turbine Engine Company/Allied-Signal Corp/Honeywell. Then I was a technical service adviser with Chromalloy Gas Turbines, in the turbine support division. I also worked for Delta Airlines as an engine installation & thrust reverser engineer.
The story adhered to by the US government and the main/lame stream media is clearly faulty.
Dan Jensen, BS
Rochester, MN
Occupation: Engineer
Education: BS Mechanical Engineering with distinction, Iowa State University, 2006
Dan Jensen, BS
BS Mechanical Engineering with distinction, Iowa State University, 2006
Rochester, MN
Occupation: Engineer
BS Mechanical Engineering with distinction, Iowa State University, class of 2006. I currently work as a test engineer, McNeilus Companies, Dodge Center, MN
Anyone with a basic knowledge of physics knows that steel will crush aluminum, not the other way around. Even if the planes could have penetrated the buildings, the buildings would have tipped over like a tree, not fallen into their own footprint. The evidence is overwhelmingly against the official story. God bless you, Mr. Gage, for your work
Richard C. Walker, MS, BS
Palo Alto, CA
Occupation: Electrical Engineer
Education: BS Engineering & Applied Science, California Institute of Technology, 1982
Richard C. Walker, MS, BS
BS Engineering & Applied Science, California Institute of Technology, 1982
Palo Alto, CA
Occupation: Electrical Engineer
I have a BS in Engineering and Applied Science from the California Institute of Technology and an MS in Computer Science from Cal State Chico. I worked for 21 years designing high speed integrated circuits for gigabit rate data transmission at HP and later for Agilent Laboratories. I designed and hold the patent on the 64b/66b line code used in 10Gb/s ethernet backbone of the internet long haul network.
Whatever you think about towers 1 and 2, building 7 was only mildly damaged and it was not even hit by a plane. The fact that it fell in its own footprint, at near free-fall acceleration, can only be explained by the use of pre-planned explosives placed weeks in advance by someone cooperating with the building security. Given that the building was largely inhabited by government agencies, it is very hard not to conclude that 9/11 was a false flag, a 'new Pearl Harbor', designed to justify a fraudulent war in the middle east. If America is to retain any shred of legitimacy, it is essential that the truth about this event be uncovered and the perpetrators be punished.
Gil Danila
Castaic, CA
Occupation: Senior Technical Project Manager
Education: BS Civil Engineering, Mapua Institute of Technology, 1982
Gil Danila
BS Civil Engineering, Mapua Institute of Technology, 1982
Castaic, CA
Occupation: Senior Technical Project Manager
I have a BS in Civil Engineering from Mapua Institute of Technology in Manila, Philippines. Before moving to the US I was a licensed civil and structural engineer in the Philippines and I designed high rise buildings.
WTC-7 was brought down by carefully planned demolition. High rise buildings do not fall symmetrically without disabling all the columns all at the same time. You do not have to be an engineer or architect to build a sample prototype structure made of sticks and cartons to show that a symmetrical fall will not occur if all the columns are not removed at the same time. This was a carefully planned demolition and would have taken months ahead to implement.
Andreas Hedqvist
Den Haag, Netherlands
Occupation: Mechanical/Aerospace Engineer
Education: Royal Institute of Technology, Stockholm, Sweden
Andreas Hedqvist
Royal Institute of Technology, Stockholm, Sweden
Den Haag, Netherlands
Occupation: Mechanical/Aerospace Engineer
Trained in structural statics, dynamics and analysis. Experience from spacecraft structural design and testing.
There are too many gaps and flaws in the official story of 911. The twin towers did not have sufficient potential energy to crush the amount of material into micron sized dust as witnessed. WTC7 is a clear case of controlled demolition. The rate of collapse for all three towers is in and of itself enough to dismiss the so called pile-driver theory (gravity driven collapse). The official explanation is hence obviously wrong and a new proper investigation is needed.
David Jensen, BASc, LL.B., MBA
Vancouver, BC, Canada
Occupation: Mining Executive
Education: BASc Mechanical Engineering, University of Waterloo, 1982
David Jensen, BASc, LL.B., MBA
BASc Mechanical Engineering, University of Waterloo, 1982
Vancouver, BC, Canada
Occupation: Mining Executive
BASc Mechanical Engineering, University of Waterloo, 1982. LL.B. Law Degree, University of Calgary, 1997. MBA, University of British Columbia, 1999.
I want to see a proper public investigation using panel members who are technically competent.
Franklin D. Lemkey, PhD
Palm Beach Gardens, FL
Occupation: Consulting Engineer
Education: BSE Metallurgical Engineering, University of Michigan-Ann Arbor, 1960
Franklin D. Lemkey, PhD
BSE Metallurgical Engineering, University of Michigan-Ann Arbor, 1960
Palm Beach Gardens, FL
Occupation: Consulting Engineer
BSE 1960 Metallurgical and Chemical, University of Michigan; DPhil 1974 University of Oxford England. Retired Fellow United Technologies Research Center. 1960-2000 Director of Commercialization USIC; 2001 Founded Joint Turbine Coating Co PW- Paton Kiev Ukraine; 1992-2014 Consulting Scientist; 2001-2018 International Center for Electron Beam Technology Ukraine Academy of Science. Kiev Adjunct Professor Thayer School Dartmouth College Visiting Professor Engineering UCONN
Did research on nano Al/FexO etc nano layers produced by physical vapor deposition for Joining applications and former student at Dartmouth. After completing his PhD formed a company to produce nano composites. It was immediately obvious from examination of dust from all three towers that nano materials were used to damage the floors after aircraft impact resulting in smoke clouds of Al2O3 + micron spherical Fe particles. Also the supporting columns were cut using nano thermite.
Patrick Rossi
Oceanside, CA
Occupation: Owner/Engineer
Education: BS Chemical Engineering, Michigan Technological University, 1982
Patrick Rossi
BS Chemical Engineering, Michigan Technological University, 1982
Oceanside, CA
Occupation: Owner/Engineer
BSCHE Michigan Technological University. MSMIS University of Missouri - St. Louis. I'm the owner of Patronus LLC, a process automation consultancy specializing in the biotech industry.
"There are enough overwhelming and compelling discrepancies in NIST's ""9/11 Final Report"" to warrant an immediate, government-independent investigation into the bringing down of the three World Trade Center buildings."
Kenneth N. Sherman
Austin, TX
Occupation: Electrical Engineer
Education: MS Electrical Engineering, University of California Los Angeles, 1982
Kenneth N. Sherman
MS Electrical Engineering, University of California Los Angeles, 1982
Austin, TX
Occupation: Electrical Engineer
I have 30 years experience in communication satellites and radar design and analysis. Bachelor and Master of Science, Electrical Engineering. Member of IEEE.
It is obvious to me that all 3 WTC towers were brought down by controlled demolition. Steel skyscrapers don't collapse symmetrically at free-fall unless deliberately prepared to do so. The official explanation of office fires cannot be true. If such fires could bring down a steel skyscraper, would anyone ever feel safe in one, or set foot in one again? The destruction of evidence and lack of a real forensic investigation make me very suspicious. Somebody got away with murder. Who? and Why? I support and applaud the efforts of ae911truth.org and believe that once Americans learn the facts presented here they will demand an independent forensic investigation into this matter - probably the single most important event in the history of the USA.
Michael C. Davis
Auburn, CA
Occupation: Cad/Bim Designer
Education: BS Engineering Technology, California State University Sacramento, 1989
Michael C. Davis
BS Engineering Technology, California State University Sacramento, 1989
Auburn, CA
Occupation: Cad/Bim Designer
I graduated in 1989 from California State University, Sacramento with a BS in mechanical engineering technology. I've helped design and create plans for water/wastewater plants for HDR Engineering for 16 years.
I've actually done the math: an analysis of Building 7 collapse acceleration. The standard kinematic equations were used to compute the speed of the building collapse. Note that these equations don't take many 'real-life' factors into account, such as air resistance, friction, and temperature. They are used to compute a theoretical 'ideal case' for use in the lab. Known data: g = 32.2 ft/s^2 (acceleration of gravity) d = 610 ft (height of bldg 7) vi = initial velocity (zero since bldg was at rest) vf = final velocity (in a vacuum) t = 6.5 seconds (elapsed time of collapse of bldg 7, according to picture found here: http://buildingwhat.org/wptemp/wp-content/uploads/2010/08/wtc7_collapse.jpg). Mathematical symbols used below: / = division ^ = exponent (ie; ^2 means squared) ( ) = multiplication. EXERCISE: Find percent of bldg 7 acceleration compared to free fall. Final velocity (using 3rd equation above) after 6.5 seconds: vf = 0 + 32.2(6.5) = 209.3 ft/sec. Now we can use vf in the 4th equation to get the distance something would travel in a vacuum. If this is close to the actual bldg height, this means that bldg 7 fell quickly, with relatively little restriction, like a controlled demolition would. d = vi + vf/2(t)d = 0 + 209.3/2(6.5)d = 680.2 ft. The percent change between the bldg height and free fall height is: %change = old value ' new value/old value(100). %change = 680.2 ' 610/680.2(100). %change = 10.3%. SOLUTION: Building 7 fell at 100% - 10.3% = 89.7% of free fall acceleration. CONCLUSION: Building 7 fell at roughly 90% of free fall acceleration. This seems like a high percentage for a large modern structure that was supposedly still being held up by structural steel beams and/or reinforced concrete columns. Mike Davis, 11/27/2010
Norman E. De Silva
Randallstown, MD
Occupation: Mechanical Engineer
Education: Master of Engineering, Howard University, 1987
Norman E. De Silva
Master of Engineering, Howard University, 1987
Randallstown, MD
Occupation: Mechanical Engineer
I have a Masters degree in Mechanical Engineering (Classical Mechanics) from Howard University (1987), and a BS degree in Mechanical Engineering from Tuskegee Institute (1984). I have more than 20 years professional experience performing tasks in specialized fields such as reliability engineering, structural engineering, mechanical engineering, stress analysis, operations research, modal testing of rotating equipment, software testing, and acquisition program management for D.O.D.-sponsored major information systems.
The explanations provided by NIST regarding the World Trade Center skyscraper collapses on 9/11 defy the laws of Newtonian Physics and structural engineering. Building 7 had all the markings of a controlled demolition due to the symmetric quality of the whole free-falling structure.
Andrew L. Sellars, MS, BS
Mesa, AZ
Occupation: Rretired
Education: BS Aerospace Engineering, University of Arizona, 1971; MS, University of Arizona, 1974
Andrew L. Sellars, MS, BS
BS Aerospace Engineering, University of Arizona, 1971; MS, University of Arizona, 1974
Mesa, AZ
Occupation: Rretired
B.S. Aerospace and Aeronautical Engineering in 1971; M.S. Mechanical and Environmental Engineering in 1974. I performed thermal and structural engineering in the aerospace electronics industry for 22 years; I then performed structural engineering of commercial buildings for 4 years including multi-storied condo complexes and the Phoenix Zoo's new orangutan exhibit.
All the evidence needs to be looked at because the 'official' explanation doesn't fit the free fall of building 7 and the near free fall of towers 1 and 2. Why was there little or no structural resistance from the lower floors when the buildings came down?
Brad J. Weber, BS
Chandler, AZ
Occupation: Network Engineer
Education: BS Electrical Engineering, Louisiana State University, 1991
Brad J. Weber, BS
BS Electrical Engineering, Louisiana State University, 1991
Chandler, AZ
Occupation: Network Engineer
I have been in the telecom, information technology & network support industry for over 20 years. I have a BS in Electrical Engineering from LSU which is where I started my career after graduating in 1991. My background includes project management, network design, audit analysis, router configuration and troubleshooting, cabling infrastructure, optical networking & network management.
Though my degree is in electrical engineering and I work in information technology, I have done quite a bit of online research into the 'official' 911 story and have found overwhelming evidence that it just does not make any sense. Concrete and steel buildings don't come down in free fall without an accelerant such as nano-thermite. It is time for those who conspired to commit these atrocities against thousands of innocent American citizens to come clean and pay the price. The American people deserve to know the truth!
Peter T. May-Ostendorp, PhD
Durango, CO
Occupation: Consultant
Education: PhD Civil Engineering, University of Colorado Boulder, 2012
Peter T. May-Ostendorp, PhD
PhD Civil Engineering, University of Colorado Boulder, 2012
Durango, CO
Occupation: Consultant
I am a Ph.D. civil engineer and an expert on energy efficiency issues as they apply to building mechanical systems and various electrical end uses.
I have waited too long to embrace what I have known to be true: that the official 9/11 investigation was a sham and that key forensic evidence has been withheld from the American public.
Enrique E. Bruque, BS
Fresno, CA
Occupation: Engineer (Retired)
Education: BS Civil Engineering, Oregon State University, 1973
Enrique E. Bruque, BS
BS Civil Engineering, Oregon State University, 1973
Fresno, CA
Occupation: Engineer (Retired)
I am a civil engineer by education and practice and a mechanical engineer by practice. I have planned, designed and managed the construction of structural frames and foundations for oil refinery towers and pressure vessels. I'm also experienced in hydraulic systems (pipelines and piping systems) and municipal infrastructure systems.
I would like to know more about the reasons for the collapse of the WTC towers. I saw them collapse on September 11 and to me it did not seem to result from the impact of the planes or from the subsequent fire.
William E. Dumke, MS
Green Bay, WI
Occupation: Rf Design Engeineer
Education: MS Electrical Engineering, University of Wisconsin Madison, 1972
William E. Dumke, MS
MS Electrical Engineering, University of Wisconsin Madison, 1972
Green Bay, WI
Occupation: Rf Design Engeineer
Master of Science Electrical Engineering 1972 UW Madison, RF, Microwave, Millimeter Wave Design Engineer at Motorola Communications Research, Very Large Array Radio Telescope Project, Sandia National Laboratory Radar Organization, Motorola Government Aerospace, and Cellcom, Cellular Provider. Retired in 2013.
The US Government should release the technical details of their investigation into the World Trade Center collapse of Building 7, since the Architects and Engineers for 9/11 Truth have already released all of the details of their investigation of the collapse of Building 7.
Renato Moscardini
Boncourt, Switzerland
Occupation: Automation Mnager
Education: HTL/ETS/STS Bienne
Renato Moscardini
HTL/ETS/STS Bienne
Boncourt, Switzerland
Occupation: Automation Mnager
1985 ' High frequency transmissions research & development1989 ' Teach Electrical Engineering1992 ' Electrical & Automation engineer on ' international food manufacturing. Specialised in Automation and IT on production machines and product flows.
I understand my specialisation is not in line with buildings construction but I am able to understand and use basics physical laws. For these reasons, I support your movement and wish you plenty of success.In clear, I totally agree the position of controlled demolition as the AE911 arguments and evidences.
Razvan Vacaru, BEng
Pesaro, Italy
Occupation: Sw Developer
Education: Università di Bologna
Razvan Vacaru, BEng
Università di Bologna
Pesaro, Italy
Occupation: Sw Developer
I'm a 23 years old italian boy, I got my B.Eng degree in Computer Science in December 2013, so I don't consider myself a big engineer. I now work in Turin for an international IT consulting Company: Alten. It's just my 6th month of work
I agree with your point of view, I don't think there's so much to say...
Alessandro Argentini
Rijswijk, Netherlands
Occupation: Retired European Patent Office
Education: Bachelors Degree Aeronautical Engineering, Pisa University, 1974
Alessandro Argentini
Bachelors Degree Aeronautical Engineering, Pisa University, 1974
Rijswijk, Netherlands
Occupation: Retired European Patent Office
My license was granted in 1974 for:Ordine degli Ingegneri provincia di PISA (Italy), N. 627 Sezione A (Civile, Ambientale,Industriale, dell'informazione) Aeronautical Engineering Degree at Pisa University, 1974. Assistant Istituto di Macchine (Fluidica), Pisa University, 1974. Patent examiner at European Patent Office 1981-84.Consultant on digital military system testing equipment, O.T.O. Melara, 1984 - 85. Consultant on logistic and maintenance of Air Traffic Control systems, A.A.V.T.A.G., Rome 1985-86.Patent examiner at European Patent Office.
The official version is physically incompatible with images broadcast on 9/11.
Roy Y. Taylor
Scottsville, NY
Occupation: Mechanical-Optical Engineer
Education: BS Mechanical Engineering, University of Rochester, 1961
Roy Y. Taylor
BS Mechanical Engineering, University of Rochester, 1961
Scottsville, NY
Occupation: Mechanical-Optical Engineer
I worked for Bausch and Lomb, Management & Technology Inc, and Eastman Kodak Company (both federal systems and commercial products). After retiring from Kodak I worked for a couple of small companies developing and making digital cameras. Then I started a new business with another engineer within Kodak making 3 dimensional images. I'm currently working on contract basis to help inventors learn how to patent their own inventions, help them make prototypes, and do patent searches. I am also working with another company to sell patents for licensing opportunities.
I was unaware of Bldg 7 for several years until my daughter told me about it. I had heard it was a controlled demolition due to the damage inside from fires started from the twin towers. However, I have grown increasingly skeptical about the planes causing the collapse of the twin towers because I could not see that damage causing the collapse of the floors below it. The outside materials peeling away from the structural steel were also unexplained. I would have thought the buildings would have collapsed more laterally in the direction of the impact points. I saved the Washington Journal interview with Mr. Gage to show my daughter and have decided to sign the petition.
Michela Talo, PhD
San Marzano Di S G, Italy
Occupation: PhD
Education: PhD Structural Engineering, Sapienza University, Rome
Michela Talo, PhD
PhD Structural Engineering, Sapienza University, Rome
San Marzano Di S G, Italy
Occupation: PhD
MS Civil Engineering, Columbia University (New York), 2011. MS Civil Engineering, Sapienza University of Rome, 2012. PhD Structural Engineering at Sapienza University of Rome.
I think the provided official version about 9/11 events lacks information and relevant details about the way in which the three WTC skyscrapers have collapsed.
William C. Dumper, BEE, MEE
Amityville, NY
Occupation: Retired
Education: BEE and MEE, Polytechnic Institute of Brooklyn, 1952 and 1953
William C. Dumper, BEE, MEE
BEE and MEE, Polytechnic Institute of Brooklyn, 1952 and 1953
Amityville, NY
Occupation: Retired
I hold bachelors and masters degrees in electrical engineering from the Polytechnic Institute of Brooklyn. I have 30 years experience in building power plants, both nuclear and fossil fuel types. My last position was as chief electrical engineer for Gibbs and Hill, Inc., an architectural and engineering firm. Although I was an electrical engineer, my position required interfacing and knowledge of mechanical and structural engineering concepts in the complex design and construction of power plants.
The whole government investigation is a hoax and fraud. This was a planned demolition of all 3 buildings and the truth has to be made public.
Kyle A. Nobes
Granby, MA
Occupation: Project Engineer
Education: BS Industrial Engineering, Western New England University, 2014
Kyle A. Nobes
BS Industrial Engineering, Western New England University, 2014
Granby, MA
Occupation: Project Engineer
I have a BS in Industrial Engineering from Western New England University in Springfield MA. I work as a project engineer in the medical device field.
It's pathetic that the government gave us such a lame excuse as to why those buildings fell. How can office fires melt steel? And how can jet fuel melt steel? They can't.
Leslie Schlag, PhD
Erfurt, Germany
Occupation: Male
Education: TU Ilmenau
Leslie Schlag, PhD
TU Ilmenau
Erfurt, Germany
Occupation: Male
11/2013 till now: Scientist / Ph.D. student in the field of Locallized athmospheric pressure plasma deposition / Nanoxerography11/2013 Master of Science in Micro- and Nanotechnology05/2012 Bachelor of Engineering in Photovoltaics and Semiconductortechnology
To many questions, to less answers... To fast deconstruction - no full investigation. The 911 commission failed!
Nicholaus Thompson
Kuna, ID
Occupation: Mechanical Design Engineer
Education: BS Mechanical Engineering, Boise State University, 2010
Nicholaus Thompson
BS Mechanical Engineering, Boise State University, 2010
Kuna, ID
Occupation: Mechanical Design Engineer
I have a bachelors degree in mechanical engineering and applied mathematics.
Math and physics do not lie. These are universal laws that hold true, and do not change based upon ones opinion.
William Beiriger
Munster, IN
Occupation: Electrical Engineer
Education: BS, Purdue University, 1969
William Beiriger
BS, Purdue University, 1969
Munster, IN
Occupation: Electrical Engineer
I support a new investigation.
Andreas Apostolopoulos
Erie, PA
Occupation: Civil Engineer
Education: BE Civil Engineering, City College of New York, 2013
Andreas Apostolopoulos
BE Civil Engineering, City College of New York, 2013
Erie, PA
Occupation: Civil Engineer
I graduated with a degree in civil engineering in 2013, and have been working in structures at General Electric ever since.
My belief is that the version of the collapse which the government gives us clearly denies the evidence as well as the laws of physics. An independent investigation is required, with all evidence available to the public, in order for the truth to be determined.
Peter Bick, EIT, BSEE, MSEE, MBA
Tega Cay, SC
Occupation: Consultant
Education: BS and MS Electrical Engineering, University of New Hampshire, 1998 and 2000
Peter Bick, EIT, BSEE, MSEE, MBA
BS and MS Electrical Engineering, University of New Hampshire, 1998 and 2000
Tega Cay, SC
Occupation: Consultant
EIT; BSEE, University of New Hampshire; MSEE, University of New Hampshire; MBA, University of South Carolina.
The towers fell at nearly free fall speed; it looks like a controlled demolition.
Scott Van Sickle
Oklahoma City, OK
Occupation: Completions Engineer
Education: BS Petroleum Engineering, Louisiana State University, 2010
Scott Van Sickle
BS Petroleum Engineering, Louisiana State University, 2010
Oklahoma City, OK
Occupation: Completions Engineer
I have a BS in Petroleum Engineering, with a minor in hurricane engineering & disaster management and a minor in geology. My professional specialty is hydraulic fracturing.
Clearly, on 9/11 evidence was ignored, assumptions were made, and conclusions quickly converged to irrational levels.
Luke K. Kraynyk, PEng
Winnipeg, MB, Canada
Occupation: Mechanical Engineer
Education: University of Manitoba
Luke K. Kraynyk, PEng
University of Manitoba
Winnipeg, MB, Canada
Occupation: Mechanical Engineer
Bachelor of Science Degree in Mechanical Engineering. Over 5 years of experience in the field of Mechanical Engineering. Registered as a Professional Engineer (P.Eng) with APEGM (The Association of Professional Engineers and Geo-scientists of Manitoba).
All of the three World Trade Center buildings that were destroyed on September 11, 2001, including 1WTC, 2WTC, and 7WTC, collapsed due to explosives within a controlled Demolition. Buildings 1WTC and 2WTC were not brought down as a result of planes crashing into them, nor did they collapse due to any effects that the planes had on the buildings. WTC7 was not brought down from fire burning nor damage caused by debris from the other buildings. There is sufficient evidence to conclude with certainty that these were all controlled demolitions which were planned in advance and executed after the planes crashed.
Philip L. Roberts
Southfield, MI
Occupation: Engineer (Retired)
Education: BS Mechanical Engineering Magna Cum Laude, Michigan State University, 1970
Philip L. Roberts
BS Mechanical Engineering Magna Cum Laude, Michigan State University, 1970
Southfield, MI
Occupation: Engineer (Retired)
I graduated Michigan State University Magna Cum Laude 1970 with a BS in Mechanical Engineering. I worked as a professional engineer at the following companies through the seventies until about 1984: Western Electric, Ford Motor, Jervis Webb, Massey-Ferguson, Chrysler, Budd, Firestone Industrial Products, Camco, and Detroit Diesel. I also earned my commercial instrument pilot and flight instrument instructor's certificates. I'm currently owner of residential rentals.
WTC 7 was obviously a controlled demolition; the falls of WTC 1 & 2 were also clearly explosive assisted. The perpetrator of this crime had the opportunity, the means and the motive to commit the crime. A new independent investigation must be initiated by the United States Government.
Trevor W. Kent, BSc (Hons)
New Ross
Occupation: R&D Engineer
Education: Waterford institute of technology
Trevor W. Kent, BSc (Hons)
Waterford institute of technology
New Ross
Occupation: R&D Engineer
Currently working in R & D for a medical device company, I have experience in production and manufacturing of aerospace, medical device and oil and gas components. I also have some experience in storm and waste water engineering. I currently hold a BSC (H) in computer aided manufacturing (level 8) as well as a diploma in manufacturing engineering (level 7).
What ever your theory might be about how the towers 'collapsed', in the world we live in today, given the known laws of physics, it is physically impossible for it to have happened the way explained to us in the official report. This in itself warrants a fresh investigation.
William Tatro
Winooski, VT
Occupation: C-130 Ipb Parts Analyst
Education: BS Mechanical Engineering, University of Vermont, 2010
William Tatro
BS Mechanical Engineering, University of Vermont, 2010
Winooski, VT
Occupation: C-130 Ipb Parts Analyst
I graduated with a Bachelor of Science degree in Mechanical Engineering from the University of Vermont in 2010.
Since 9/11, there have been far too many dramatic changes to government control under the guise of protection for there to be any ambiguity concerning how the buildings fell and who was truly responsible for murdering all of those innocent people.