The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Todd Urick
BS Civil & Env Engineering, UC Davis
Knowing the basics of structural engineering, controlled demolition appears to be one of the only explanations of why WTC building 7 fell--and possibly the towers. Building fires do…
Todd Urick
BS Civil & Env Engineering, UC Davis
Davis, CA
Engineering Major, emphasis in structural and traffic engineering.Involved in non-profit work and non-commercial radioRadio Broadcast/Technical Consultant
Knowing the basics of structural engineering, controlled demolition appears to be one of the only explanations of why WTC building 7 fell--and possibly the towers. Building fires do not cause steel-framed buildings to collapse. I am unclear why the government would not want an independent scientific investigation involving some of the most respected architects and engineers to take place in the absence of solid conclusions drawn in the official 9/11 report.
Nam H. Vo
B.A., Engineering, UC Berkeley
The 9/11 events regarding to 9/11 Building Collapses were clearly an inside job. We have a right to know the truth and we demand for the truth.
Nam H. Vo
B.A., Engineering, UC Berkeley
San Jose, CA
Graduated in 2006 from UC Berkeley Electrical Engineering & Computer Sciences. Spent three years working and research.
The 9/11 events regarding to 9/11 Building Collapses were clearly an inside job. We have a right to know the truth and we demand for the truth.
David B. Taylor
Business Owner
BS Film
I believe any rational person with the courage to face the facts will find it hard to believe the official story. If even if the smallest amount of…
David B. Taylor
BS Film
Simpsonville, SC
Occupation: Business Owner
Have spent most of my adult life in custom home building as a finish carpenter. The homes are in the million dollar range. I am currently managing a small company which sells alternative health care products through domestic and foreign distributors.
I believe any rational person with the courage to face the facts will find it hard to believe the official story. If even if the smallest amount of the evidence suggests a controlled demolition, it must be thoroughly investigated--not ignored all together. Ten years of war has been the result of 9/11. The world should settle for nothing less than the truth.
Norman C. Scheaffer, MS
Civil Engineering
MS Chemical Engineering, Cornell University, 1967
The tragedy of 9/11 has been used to drive our nation into war and circumscribe the personal freedoms of the American people. The conclusions of the government investigation…
Norman C. Scheaffer, MS
MS Chemical Engineering, Cornell University, 1967
Bellingham, WA
Occupation: Civil Engineering
Bachelors (1965) and Masters (1967) degrees in Chemical Engineering from Cornell University. Forty-five years of design and design management experience in the fields of chemical, environmental, and civil engineering.
The tragedy of 9/11 has been used to drive our nation into war and circumscribe the personal freedoms of the American people. The conclusions of the government investigation do not account for all of the phenomena reported, so the current explanation is incomplete and the investigation must be reopened.
John C. Schofield, PE
BS Environmental Engineering, Penn State
With the corporate media and Hollywood and TV movies, it will be an uphill climb to ever get this subject revisited and the truth known. College professors should…
John C. Schofield, PE
BS Environmental Engineering, Penn State
Lexington, VA
I am a PE for the Virginia Department of Health in the sewage program. I graduated from Penn State in 1975.
With the corporate media and Hollywood and TV movies, it will be an uphill climb to ever get this subject revisited and the truth known. College professors should be teaching the truth, as a starting point. Maybe it will be easier to start with the truth coming from outside the US.
Alvin J. Martinez, MAS, MS
Retired College Professor
MAS Computer Science (Boston U), MS Engineering-Economic Systems (Stanford)
The evidence of nano-thermite residue in the debris clearly shows that the federal government was behind the WTC disaster.
Alvin J. Martinez, MAS, MS
MAS Computer Science (Boston U), MS Engineering-Economic Systems (Stanford)
San Juan, PR, Puerto Rico
Occupation: Retired College Professor
Education: see aboveExperience:IT field: programmer, systems analyst, system manager, IT manager.Professor: computer science, MIS, management science/operations research, principles of management, strategic management.Writer: Quasi-fictional narratives about current & historical affairs.Website: DiegoAzeta.org
The evidence of nano-thermite residue in the debris clearly shows that the federal government was behind the WTC disaster.
Timothy Hightower
BS MS, Chemical Engineering, San Jose State University California
In January 2004 I stumbled on a web site that showed evidence that the WTC buildings were brought down by controlled demolition on 9/11. It is clear that…
Timothy Hightower
BS MS, Chemical Engineering, San Jose State University California
San Jose, CA
Early in my career I worked in the chemical industry. For the last nearly 20 years I have worked in aerospace. I am a member of the American Institute of Aeronautics and Astronautics, as well as a member of the American Institute of Chemical Engineers.
In January 2004 I stumbled on a web site that showed evidence that the WTC buildings were brought down by controlled demolition on 9/11. It is clear that the buildings had help to bring them down. The collapses of WTC towers 1 and 2 were obviously far more energetic events than can be explained by some sort of progressive gravitational collapse initiated by a simple weakening of the structure by hydrocarbon fire. Here I am thinking of the tremendous dust clouds (pyroclastic flows) and the nearly free fall speed. Building 7, not hit by a plane, appears to have been a classic controlled demolition, and perfectly symmetrically executed.
James V. Bronke, BSEE
BSEE, CSUN
It is clear that the aircraft used to impact the WTC buildings were not the commercial aircraft alleged to have been the ones. Our news media is a…
James V. Bronke, BSEE
BSEE, CSUN
Cassopolis, MI
I was one of the 16 Engineering managers who signed off on the Boeing 787 being safe to fly. I was responsible for all of the avionics problems. I have a lifetime of experience in electronics systems integration at companies like Boeing, Honeywell, Rockwell Collins and Litton-Guidance and Control.
It is clear that the aircraft used to impact the WTC buildings were not the commercial aircraft alleged to have been the ones. Our news media is a part of the conspiracy to keep this quiet. Clearly the size of the impact zone reflects that as the truth, something our news media (involved in the conspiracy) will keep from the public.
Arthur Long
BSME
For the good of our current and future citizens, there is a need for a better physical understanding of how these buildings came down (of all possible modes…
Arthur Long
BSME
Palatine, IL
30 years as a carpenter, then BSME degree from University of Illinois-Chicago. Since then, 15 years working in design engineering for Motorola, Zebra Technologies and Cummins Allison Corp.
For the good of our current and future citizens, there is a need for a better physical understanding of how these buildings came down (of all possible modes of collapse) than what has been officially presented to date.
Bob Belanger
Land Architect
OSU 1976
I support the call for a new investigation into WTC7.
Bob Belanger
OSU 1976
Austin, TX
Occupation: Land Architect
I'm a landscape architect, licensed in the state of Texas.
I support the call for a new investigation into WTC7.
Lise Longo, Architect
Universidade Federal de Santa Catarina
Considero suspeito o epis'dio do 11/9. Diversos fatos est'o inexplicados: a queda livre das torres g'meas e do pr'dio 7, a persegui''o ao cameraman Kurt Sonnenfeld, refugiado na…
Lise Longo, Architect
Universidade Federal de Santa Catarina
FlorianPolis, Santa Catarina
Sou arquiteta formada a 10 anos, com experi'ncia em obras pequenas, reformas e interiores. Translated into English- I am 10 years formed an architect with experience in small works, renovations and interiors.
Considero suspeito o epis'dio do 11/9. Diversos fatos est'o inexplicados: a queda livre das torres g'meas e do pr'dio 7, a persegui''o ao cameraman Kurt Sonnenfeld, refugiado na argentina, os avi'es pulverizados. Ap'io a causa, por compaix'o 's fam'lias atingidas, e tamb'm por que a verdade sempre liberta! Translated into English- I believe the episode of suspected 9 / 11. Several facts are unexplained: the free fall of the twin towers and building 7, the persecution of cameraman Kurt Sonnenfeld, a refugee in Argentina, the aircraft sprayed. I support the cause, compassion for the bereaved families, and also because the truth always free!
Jean-Claude Pierrard, Architecte
ISA St-Luc BRUXELLES
I thought the collapse looked like a controlled demolition since the first time I saw the building collapse on TV
Jean-Claude Pierrard, Architecte
ISA St-Luc BRUXELLES
RobelmontMeixDvtVirton, Luxembourg, Belgium
Independent architectural practice since 1983 in Belgium and Luxembourg.
I thought the collapse looked like a controlled demolition since the first time I saw the building collapse on TV
Petition Signatories
Michael G. Dawson, Tool & Die Maker
East Moline, IL
Occupation: Metal Expert
Education: AAS
Michael G. Dawson, Tool & Die Maker
AAS
East Moline, IL
Occupation: Metal Expert
I have been a Machine Tool Specialist and Tool and Die Maker for over 35 years. I have worked with all kinds of metals and plastics. I am vary well acquainted with the properties of heat treating and metallurgy.
I was fooled for almost a year, due to, in the most part, by the fact that my mind would not allow me to take in the evil that we have put into office. Even though, as I watched 9/11 unfold before my eyes, the analytical part of my mind was saying. 'Wait a minute now. This just doesn't make any sense.' When I could wrap my mind around it, the walls of denial fell faster than the WTC. They made so many mistakes. They had to have hired an idiot to do the wire up job. Fact!
William T. Mitchell
Elyria, OH
Occupation: BA History
William T. Mitchell
Elyria, OH
Occupation: BA History
Retired United Steelworkers international staff representative. Hold a BA degree in History. Prior to being appointed to the international union position I had worked for 28 years in the steel industry as an electronic tech hot metal.
I find it difficult to accept the official position regarding the forces relied upon to have the towers destruct in the manner described and observed. Having considerable experience with the production of steel from iron through finish product and exposure on some temperature distribution versus tolerance for distortion, the idea that the airplane, lets assumed it was fully loaded with jet fuel at the time of impact, could raise the temperature of the construction grade steel beams, after expending most of fuel energy to excite the existing combustible materials in the area of impact, to a temperature consistent with the steel beams losing its integrity. Moreover, given the impact zones and assuming that the temperature rose enough to cause the beams to lose integrity, it would seem that the weakness invoked would cause the top portion of the towers to fail toward the weakened area and not come down as it did. Given the actual film of the plane hitting the South tower one can observe that the majority of the jet fuel burned catastrophically depriving the combustibles I believe of enough fuel to raise the temperatures over 900 degrees F. Even so, the outside wall of the South tower would have had the steel weakened in the exit corner and there should have been the area of distortion causing the tower to topple instead of pan caking as it did.
Jonathan W. Edwards
Stephens City, VA
Occupation: A Renaissance Man
Education: student
Jonathan W. Edwards
student
Stephens City, VA
Occupation: A Renaissance Man
I was born in 1981. I was a fabricator of structural steel, including welding, for about 2 years. I took an introductory course, but have not been certified as a welder. I have, as far back as I remember, always been interested in general science, mathematics, physics and chemistry. My favorite things are big numbers and big structures. My mother is a librarian so I have a fundamental love of books and knowledge. In my 30 years of living I have read countless books, some popular, some technical, about metallurgy, physics, chemistry, astronomy, mathematics, computers, biology, etc. I do not claim to know anything about any of these subjects, however, I do claim excellent knowledge of the scientific process, having (re)discovered many things through its use. It is the best tool humans have ever used in search of truth and should be applied in ALL situations where knowledge, not opinion, is sought, without exception. I am currently the president of the STEM (Science, Technology, Engineering, and Mathematics) club of Lord Fairfax Community College's Faquier campus.
It is clear that WTC-7 was a controlled demolition from, not scant, but overwhelming evidence, including collapse without any structural resistance (which would have put nearby buildings in danger from the asymmetrical collapse), the fact that the center of the building went first and the edges so closely behind that they form a perfect cup along the roof which is painstakingly sought over months of planning, not always successfully, by demolishers. It is symmetry that is only realistically likely in a consciously controlled collapse. Once, when I was a fabricator, I decided to test the power of my 6000 degree Fahrenheit oxy-acetylene torch flame. It was plenty hot enough for steel melting and above the melting point of all natural elements. Seeing a nearby rough quartz rock I though I would melt it. As it turned out the rock was more inclined to crack than melt, but I wanted melting from my 6000 degree flame. After about five to seven minutes of continuous envelopment by the flame, I finally succeeded. I succeeded in melting a smooth, but thin, skin upon the rock. I am not sure how long it would have taken to melt this grape-sized pebble, but longer than five minutes in a 6000 degree Fahrenheit flame. Acetylene produces the hottest flame of any fuel gas, such temperatures cannot be achieved with paper, wood, plastic or any other bit of material that can be found in a typical office. I had thought that the claim of the official investigative committee was that heat WEAKENED the steel, but did not MELT it. Turns out that there wasn't simply one governmental organization investigating, and the other reports don't match the official one. To get to the point of the above story, I want to know how CONCRETE was MELTED. That's my main concern; how did the circumstances I saw on live TV melt ROCKS? The fact that this line of questions was not perused confounds me further. I do not believe in conspiracy theories; just because you can't explain something at present does not indicate the work of magic, miracles, supernatural occurrences, or conspiracies. Because I do not simply write off the question with one of the above, I am actually mystified. I have only been truly mystified a few times before, so I take the pursuit of an answer to this concern, regarding melted melted rock and ceramics, very seriously. The answer must be full, true, and definitive; the official explanation is not. One reason that pops into my head for the crucial information to be a danger to public safety is that it could indicate the involvement of a high-level public entity, thus, if the public knew, it would lose all faith in the government to serve them and the country would melt, pun intended, into anarchy. That IS certainly a danger to the public. The people that form our government have a history of doing things, in secret, that the American people would otherwise not allow. This is not conspiracy or even necessarily bad government; these could be legitimate protections of the public. However, I truly believe that regardless of whether or not it's a good or bad idea, the moral and ethical issues should be discussed by the public. After all, it's already happened, so hypothetical government decisions could not be stymied by the public. The only reason to continue secrecy, that I can think of, is if they plan on making such decisions in the future. Let us open the wound and squeeze out the pus; it can only make us HEALTHIER. A proper investigation will happen because it MUST happen. Why not sooner rather than later? Why should our posterity know the facts of events that just happened, but not the people involved. Please, just tell me how the concrete melted. That would be enough for me; it's not so much for which to ask.
David O'brien, Welding Student
Sacramento, CA
Education: student
David O'brien, Welding Student
student
Sacramento, CA
Been taking courses on welding for close to five years. Constantly interested in any metallurgy. Working for my BA in welding technology.
Clearly a controlled demolition. Plus the video and pictures of the nano thermite cutting the supports. Investigation a must!
Jorge L. Brandao
Westfield, NC
Occupation: Sr Database Administrator
Education: Metallurgical Engineer, Database Admin.
Jorge L. Brandao
Metallurgical Engineer, Database Admin.
Westfield, NC
Occupation: Sr Database Administrator
Metallurgical engineer, researcher in metallurgy, systems analyst and Sr. Database Administrator. Born in 1952, in Rio de Janeiro, Brazil. Lived in several places in Canada, and Basel, Switzerland, then in the US. Fairly grounded person, guided by logic and science. Not bound by politics or religion.
The way the buildings came down were inconsistent with the government's conclusion. I did suspect something odd in the way these buildings fell right from the beginning.
Tommy R. Conkin
Indianapolis, IN
Occupation: Gas Turbine Manufacturing
Tommy R. Conkin
Indianapolis, IN
Occupation: Gas Turbine Manufacturing
Retired from Allison Gas Turbine, Division of GM, now owned by Rolls Royce, with background and 22 years experience in Aeronautical Military and Civilian Gas Turbine Propulsion, Manufacturing, Process and Exotic Metallurgy. My job was to work with Engineering to identify, troubleshoot and improve manufacturing processes to bring them into conformance with expected quality standards to reduce the additional costs inherent with rework and scrap, thereby increasing overall profit for the Business and improving customer image.
It seems evident, without a doubt, after examining the evidence put forth by the numerous contributors, with their overwhelming experience and qualifications, that the Official Government hogwash screams for the justice and accountability that a Democratic Society demands, is owed and expected from its Leaders and Representatives. This is especially so for the multitude of families and friends of those who lost their lives that shattering day. To those people my heart goes out as they are constantly forced to relive the events of that fatal day and I pray they one day find closure and peace once again and return to their daily lives.
John Fisher, Tool And Die Mak
Gillette, WY
Occupation: Manufacturing
Education: Vo-Tech Certificate
John Fisher, Tool And Die Mak
Vo-Tech Certificate
Gillette, WY
Occupation: Manufacturing
20 years building and repairing production equipment ; necessitates fair knowledge of metallurgy ,strength of materials, mechanical design. metallurgical properties of various alloys,....familiar with molten metals in casting , forging and welding . (all processes)
Obvious immediately controlled demo. Try reading the OKBIC Report ( State Representative Charles Key's County Grand Jury ) on OKC ----you are all about Old News wake up THEY ARE MURDERING TREASONOUS SCUM, capish? They are destroying America on Purpose , prepare for CW2 , and leave the Ivory Towers these scum are , and have been a long time , MURDERERS
Arthur P. Dent, Metallurgist
Sydney, NSW, Australia
Occupation: Metallurgy
Education: Metallurgy Cert.
Arthur P. Dent, Metallurgist
Metallurgy Cert.
Sydney, NSW, Australia
Occupation: Metallurgy
G'day 'guys', I worked as a Metallurgist for over 10 years in several areas of secondary metallurgy. Now bear with me a second, I was also a highly experience Skydiver with over 10,000 jumps and 30 years experience.
Skydivers rule of thumb:- It takes 10 seconds to fall the first 1,000' and 5 seconds for each subsequent 1,000'... the main WTOs were just over 1,000', they collapsed in about 10 seconds... THEREFORE THE HUGE 4, 3 AND 2 THICK 'H' BEAMS GAVE NO MORE RESISTANCE TO THOSE BUILDINGS COLLAPS THAN THIN AIR! THIS IS CLEARLY RIDICULOUS.
Denny L. Melin
Duluth, MN
Denny L. Melin
Duluth, MN
I have a technical school diploma and nearly 40 years experience in the machine design field with a wide variety of engineering work disciplines , including metallurgy , environmental, chemical and other process industries work experience,gasses ,fluids etc,too numerous to mention here but sufficient to analize the 911 events .I worked inside north com and falcon air station in 1987 aand 1988,so I know they are not telling the truth about when these installations came into being.
Official line defies natural and physical laws which govern this planet.
Dirk V. Marel, MBO
Katwijk, Netherlands
Occupation: Research Analyst
Education: MBO - Radiation Expert
Dirk V. Marel, MBO
MBO - Radiation Expert
Katwijk, Netherlands
Occupation: Research Analyst
Working with the Electron Microscope (SEMLV), 3D Zeiss Xradia Versa 520 and Skyscan, Orbis Rontgenfluoresence, FTIR and UVVIS and Raman + many more
Have seen and read all the relevant articles from Engineers and Scientists. I'm interested in 9/11 since the beginning. Building 7 has not come down by fire ....Pentagon has not been struck by an airplane. WTC buildings have more questions than facts....
Douglas And Sue D. Newman, Businessman (Sim
Honolulu, HI
Occupation: Security, Metallurgy
Douglas And Sue D. Newman, Businessman (Sim
Honolulu, HI
Occupation: Security, Metallurgy
Business owner of multiple different businesses in Hawaii and California, currently retired, have done high rise security as a Master Locksmith in a multitude of buildings here in Hawaii, Japan and Australia. I have done prior writing, copyright work and investigative research for private attorneys and the Attorney Generals office in the state of Hawaii.
I was married to a sculpturer and I have a good metallurgical background and know that even with excessive bottled oxygen you can not get one inch of steel red hot with kerosene. Secondly, my grandfather and my father-in-law were blacksmiths and I learned my metallurgy over many years from the time I could pick up a hammer. That building burnt in an oxygen starved environment, the smoke told you that except when the thermite ignited occasionally and that was evident with the sparkling bursts of molten metal escaping out the windows. Note; thermite produces it's own oxygen in a chemical reaction in burning..
Jo Klauser
Latrobe, PA
Occupation: Technical Engineering
Education: B.S. Welding Technical Engineer, PCT
Jo Klauser
B.S. Welding Technical Engineer, PCT
Latrobe, PA
Occupation: Technical Engineering
I am a technical engineering student at Pennsylvania College of Technology with a concentration in welding. I've been in the welding industry for 8 years and counting. Currently, I am welding pipe for a job shop that produces air compressors. Over the years I've been ranked in the top 10% of the welding students in PA during 2003, I've been recognized by the Latrobe Area Chamber of Commerce for Excellence in Education. In between my studies, I tutor CNC programming, Non-Destructive Testing Lvls 1&2, and Metallurgy.
The buildings fell too quickly. Jet fuel burns at roughly 400F, compare that to the burning temperatures to steel, aluminum-copper alloy, and titanium. The b-b shape pellets of oxidized metal that were found on the streets of Ground Zero are similar to those given off from a torch cutting process.
Gordon Kreft
Chassell, MI
Occupation: Metal Worker
Gordon Kreft
Chassell, MI
Occupation: Metal Worker
Die maker by trade. Tool and die apprenticeship. Higher education in metallurgy.
When viewed next to a controlled demolition, it becomes very obvious that there was no resistance in the collapses. There was no bending no twisting of metal. No resistance what so ever. There was no metal left to resist. Who knows where it went? Find out who sold nano thermite, how much and to whom in the period from 1998 to 2001. It must have taken literally years to install that much material in the structure of the buildings.
Jim Barney
Portland, OR
Occupation: Disabled/Unemployed
Jim Barney
Portland, OR
Occupation: Disabled/Unemployed
I am a male 55 year old U.S. born citizen. I have no engineering or architectural expertise. I did spend 20 years in metal fabrication as a welder/fitter which included much structural steel work. My training was received at The College of DuPage in Glen Ellyn, Illinois. It included math, blueprint reading, metallurgy and welding. I graduated and was certified in gas, arc and heliarc welding in all positions in 1975. I picked up other metal working skills in such as thermal-arc cutting, bending/forming, heat shrinking, etc. as I worked my trade. I do know a thing or two about the properties and breaking points of various metals as I have had to be certified to weld them. That process involves chemical dye tests, x-ray tests and physical breaking point tests. I know that a jet impact and resulting jet fuel explosion/fire COULD NOT POSSIBLY be ejecting multi-ton metal objects that were welded in place 30 floors and more beneath the impact area. Neither would there have been any explosive materials in the buildings capable of generating such heat and force as the official story suggests. Just viewing the explosions PRECEDING each floors implosion is enough to raise serious concern as to what really happened. Building 7 wasn't even struck and still mysteriously imploded. Yet none of the other buidings in equal proximity reacted in likewise fashion to the events of that day. Forget conspiracy. The events regarding the WTC buildings on 9-11-2001 bear investigation as, in my opinion, they certainly weren't coincidence.
Too many unanswered questions. Explosions can be seen ejecting material systematically preceding the progress of the imploding floors of the buildings. Neither jet fuel nor any building materials produce the heat required to effect the metals in the buildings structures in the way people have been told. The FAA had responded to 67 incidents of planes veering off course in the year preceding 911 and followed procedure to the letter in each incidence. That was not the case on 9-11-2001. I could go on all day. There are just too many unanswered questions and extraordinarily unique failures to follow standard protocols and deviations from the way an airliner impact would have affected those buildings. Investigation into the truth of these matters is a duty of the American people. Enough said.
David D. Clift
Superior, WI
Occupation: The Arts (Music)
Education: Degreed
David D. Clift
Degreed
Superior, WI
Occupation: The Arts (Music)
Though I hold no officially sanctioned degree in engineering from a college or trade school I have, throughout my life's experience gathered a rudimentary knowledge of metallurgy, architecture and engineering sufficient enough to know without a shadow of a doubt that the government's official explanation, as given in the 9/11 commission report, is insufficient, inaccurate and downright wrong.
As a youth I was fascinated with the Twin Towers and their construction. I would learn and study every bit of information and technical data I could get my hands on concerning the Towers. This is why after learning of the first plane strike I was quite confident that the Tower would not collapse. When the second plane hit I knew that this was an attack and not an accident but I was still very confident there would be no collapse. The Towers were built to withstand the impact of a 707. They were built with triple, quadruple and in some areas quintuple engineering redundancy. When the first Tower came down I knew at that moment that something was very, very wrong. I could tell by the size and distance of the lateral ejections that explosives had to have been used. In the months and years that followed I would research everything I could get my hands on regarding the destruction of the Twin Towers. There is no doubt in my mind whatsoever that the Towers were demolished via explosive demolition.
Oscar S. Jolly, Certified Tool A
Cedar City, UT
Occupation: Tool And Die Making/Machine Building
Oscar S. Jolly, Certified Tool A
Cedar City, UT
Occupation: Tool And Die Making/Machine Building
45 years experience working with ferrous and non ferrous metals including heat treating tool and structural grade steels, working closely with mechanical engineers and metallurgists.
I have seen many television videos of controlled demolitions and have been present at live demolitions of at least six buildings taller than ten stories. The destruction of WTC 7 and the Twin Towers appeared to me identical to controlled demolitions I have witnessed. As a toolmaker I am familiar with the properties of various steels and am convinced the collapse of these buildings had nothing to do with fire.
Michael T. Spiteri
Wallingford, CT
Education: ASME, Waterbury State Technical College
Michael T. Spiteri
ASME, Waterbury State Technical College
Wallingford, CT
I have an Associates of mechanical engineering, with a minor in materials engineering and metallurgy. I have served 10 years as an elected official in my community.
I have found many discrepancies and curious practices since 9/11. I also find it very convenient that many corporate lawsuits were terminated due to the loss of evidence from the building's destruction. I question consistency of buildings that basically fall within their footprint from control demolition, and the lack of buildings suffering from similar damages that have not collapsed. I've gone from cynical, to totally not believing the official line in New York City or the Pentagon.
Jarret E. Hall
Granite Falls, NC
Education: AS Machining Technology
Jarret E. Hall
AS Machining Technology
Granite Falls, NC
My education consists of working with all types of metal, physics, metallurgy, statics and strength of materials. I have worked in heavy industry for 20 years.
My education and training offer me some insight into such fields as metallurgy, physics and an understanding of the properties and behavior of various materials. Backed by my educational knowledge the statements made by NIST and the 9/11 Commission can quickly be determined to have been fabricated.
Chris Fritz
Dallas, TX
Occupation: Business Owner
Chris Fritz
Dallas, TX
Occupation: Business Owner
Commercial roofer trained by a top metallurgist. Specializing in metal structures and what damage is to metal.
Obvious False flag to create ''war on terror''. Working as well as ''war on drugs''.......now we're helping Afghan thrive their Opium business while CIA brings it in our country. Now, US citizens are being called terrorists. The pattern is so obvious today it baffles me on how many people can't see it.
Clayton N. Donoghue
Barrie, ON, Canada
Occupation: Retired
Education: Lakehead University
Clayton N. Donoghue
Lakehead University
Barrie, ON, Canada
Occupation: Retired
Worked as a Mechanical Engineering Technologist, first in the wood heating industry and later as a QC technologist in the automotive industry. Have an extensive knowledge on the properties of fires in a controlled environment from first employment. From the second, I have an extensive knowledge in precision measurements.
In my first employment I was paid to come up with product designs with extremely high burning efficiencies. The best wood burning design products are measured by the amount of smoke they emit. Black smoke means low oxygen and slow burning process. Very inefficient design. White smoke, or better still no smoke means extremely high levels of burning and thus high efficiency. When I saw the two WTC with vast amount of black smoke I knew at a glance, oxygen starved fires with temperature aroung 600 degrees or less. Such temperatures would barely burn wood let alone steel. So you can imagine my surprise when I saw the two buildings collapse. I knew from an experienced heating technologist perspective - not humanly possible!
Neil Walker
Champlain, NY
Neil Walker
Champlain, NY
Have over twenty years in the Machinist trade and metal fabricating with experience in metallurgy which accompanies it.
The Towers were planned and constructed to withstand multiple hits from airplanes in addition to the fuel carried by them. Only ONE plane hit each Tower. Shortly thereafter each tower collapsed. Either the architects were grossly incompetent or the Towers had additional 'help' in creating their collapse. One must keep in mind that from the time each plane hit the upper part of the Towers, the entire structure BELOW the damaged area was pristine and untouched. Not one of the videos displaying planes hitting the Towers shows ANY sway or movement from the Towers as they're being hit in response to the impact. That speaks for itself in how strong they were.
Thomas Blaser-BöHlen
Oberdiessbach, Switzerland
Thomas Blaser-BöHlen
Oberdiessbach, Switzerland
Born 1958. Married. Two sons. Trained Goldsmith with several years of experience as a professional craftsman (Metallurgy related knowledge). 1989 Diploma in Missions Studies from the All Nations Christian College in Hertfordshire, England. Cambridge Certificate of Proficiency in English in 1990. Catechetical Diploma (Reformed Church of the Canton of Berne, Switzerland) in 1998. Ten years of teaching experience 1996-2006. In recent years I have been spending a lot of energy in operating a website dealing with Interfaith Dialogue, the rise of National Socialism, the Shoah, the Peace Movement, Democracy and Human Rights.
It is bad enough that a catastrophe like the destruction of the 3 skyscrapers with so many fatalities on the 11th of September 2001 happened. What makes it worse is the fact that there are legitimate doubts about what the Bush Administration and others told the world. What definitely should alarm everybody is the way a majority of Americans and the News Media etc. have so far dealt with people that raised honest questions.
Gavin Huhoff
Rodgau
Gavin Huhoff
Rodgau
Bachelor of Metal Production Technology and Operations (CCI)
When I just saw the condition of all the steel girders around the accident scene - obviously cut at a diagonal - it was enough evidence for me to not believe the official story. Such clean cuts on beams are not the result of a cleaning-up operation. All these steel girders are muted witnesses of thermite explosives.
Mattias Olsson
Ludvika, Sweden
Occupation: Cad-Drawer
Education: Bergsskolan
Mattias Olsson
Bergsskolan
Ludvika, Sweden
Occupation: Cad-Drawer
I Studied 4 years for a engineer degree in metallurgy and materials. I now make 3D models and schematics for steel products in the mining business.
It is obvious that the conspiracy theory called the 'official story' is a big lie and that false flag attacks have been used thousands of time in history to manipulate the public. But more and more people are opening their eyes to them now and that is good. The official story is against the laws of science and the truth must come to light, it simply can't continue like this or I'm getting really scared of our future.
David Lancaster
Coventry, United Kingdom
Occupation: Graphic Design
Education: HNC Mechanical Engineering
David Lancaster
HNC Mechanical Engineering
Coventry, United Kingdom
Occupation: Graphic Design
Alex A. Anderson
San Pablo, CA
Occupation: Union Sheet Metal Worker
Education: Applied Science Degree
Alex A. Anderson
Applied Science Degree
San Pablo, CA
Occupation: Union Sheet Metal Worker
I have 20 years experience in hi-rise building construction, HVAC fab and installation, metal roofs. I worked the 64 story Millennium Tower in San Francisco in 2008 , the highest so far, and many others.
I can see every day how a skyscraper is built. There is no way it could crumble like it was made of sand. Those buildings were full of explosives, and there's not enough energy in an airplane to do that kind of damage, is my opinion. That the official story of 9/11 is far from true, we need the truth and we need to punish the real perpetrators.
Russell A. Montgomery
Houston, TX
Russell A. Montgomery
Houston, TX
I am a member of the general public who would like to see a new investigation to happen.
There are too many questions and no real official answers.
Lee Dahle
Henderson, NV
Occupation: Retired
Education: BS Mechanical Engineering
Lee Dahle
BS Mechanical Engineering
Henderson, NV
Occupation: Retired
Born 1950, graduated UC Berkeley in 1975. Worked in Silicon Valley from 1976-1992. Moved to southern Nevada in 1992. Got involved with land development and construction of custom homes and commercial buildings. Retired from engineering in 2008.
Steel and concrete do not turn to dust at temperatures that were present. Additionally, the wasn't enough heat to bring down any of the builds. In my opinion, if the government can get away with this it can get away with just about anything it wants to do to us.
Jesse M. Ostapec
Chatham, ON, Canada
Occupation: Quality Engineer
Education: Fanshawe college
Jesse M. Ostapec
Fanshawe college
Chatham, ON, Canada
Occupation: Quality Engineer
The events of 9/11 shoulden't even be considered a conspericy theory. I have a passion for truth, and the events of 9/11 is still very relevant in our world today. The thing that inspired me to join ae911truth was the ballsy move of opening up monorail on ground zero. I see it as a slap in the the face to anyone who lost their life on that day. I remember watching 9/11 on the news the day it happened, and would love to see some sort of investigation into the events of that day, or at least building 7. The people of this contenent need to wake up, and understand that the real culprits of the tragity have never been brought to justice, or recognized. This is the first step and I want to help get the ball rolling.
Cristina Ponte
Wilmington, DE
Occupation: Metallurgical Engineer/Failure Analyst
Education: BS Materials Science & Engineering, Lehigh University, 2012
Cristina Ponte
BS Materials Science & Engineering, Lehigh University, 2012
Wilmington, DE
Occupation: Metallurgical Engineer/Failure Analyst
I graduated from Lehigh University Materials Science & Engineering Department in 2012. I have now spent 2 years working on failure analysis of all kinds of materials.
I believe in scientific evidence and we deserve a real investigation. They should be welcoming a debate and discussion if there is nothing to hide.
Bradley S. Walls
New Market, MD
Occupation: Iron Fabrication
Education: Trade School
Bradley S. Walls
Trade School
New Market, MD
Occupation: Iron Fabrication
Ten years of professional metalwork, working with structural builds(certified in MD for structural Spray Arc MIG weding process)
An easy route for explaining the track of the fall. A free fall destruction of a building is much like electricity, they take the path of least resistance. Controlled demolition is a strict design principle on keeping the structure within itself, a process of confinement when working especially within close bounds of other structures. What we saw on all three structures were the strict principles of controlled demolition.
Ric Hampsom
Atlanta, GA
Occupation: Metallurgical Engineer
Education: BS Materials Engineering & Metallurgy, University of Sheffield England, 1992
Ric Hampsom
BS Materials Engineering & Metallurgy, University of Sheffield England, 1992
Atlanta, GA
Occupation: Metallurgical Engineer
BS Materials Engineering and Metallurgy, University of Sheffield, England, 1992. Materials engineering has numerous courses on failure analysis and the properties and mechanisms of failure of materials.
I am focused on fact based evidence. Essentially steel and concrete do not fail in the way portrayed by the official reports. Failure of steel is ductile; it can soften and stretch, but doesn't fail like breaking glass unless extremely cold. A hydrocarbon fire (e.g. aircraft fuel) cannot produce enough energy to compromise an entire building. The building would have partially failed, and the lower unburnt floors would have provided a huge amount of resistance to collapse. The collapse certainly wouldn't have occurred at free fall speeds. Bottom line: Nanothermite? Explosives? Who knows. That's the point. A non-biased, open sourced investigation that actually includes the collapse of building 7 should be done. All computer models, assumptions and input data should be open to the public and subject to peer scrutiny. This is what is called 'science'. We could use a whole lot more of it. We need a truth and reconciliation commission. The people that died that day and are still dying deserve better.
Joe Mcvicker, AAS, AS
Spencer, IN
Occupation: Union Ironworker
Education: AAS App. Tech, AS Business Admin.
Joe Mcvicker, AAS, AS
AAS App. Tech, AS Business Admin.
Spencer, IN
Occupation: Union Ironworker
Structural Iron worker for 11 years. Graduated at the top of my class. Foreman for the last 7 years. Involved and trained in all aspects of steel building fabrication, construction, erection,and relevant metallurgy. Studied the case of Sept 11, since early 2002.
All evidence points to some form of controlled demolition. No questions about it. The lies are miles deep. This was the false flag event needed to begin the much needed 'war on terror'. The war on terror and the associated laws passed are essential to the coup' taking place in America. The U.S. constitution is being systematically deconstructed and made irrelevant. All because of a 'war on a tactic'. Just like the war on drugs, there is no real, known enemy. There is no end, just endless possibilities for further usurpation.