The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Martin E. Beck, Aerospace Engine
BS Electrical Engineering
I got interested because of the polls showing an international opinion of over 50% believing it wasn't terrorists. When I saw this I felt the government had a…
Martin E. Beck, Aerospace Engine
BS Electrical Engineering
Albuquerque, NM
BSEE 1979 from the University of New Mexico Retired Aerospace engineer Inventor in transportation arena. I am a trouble shooter and versed in finding the root cause of a failure. I make jewelry and weld and know 2000 degrees pretty well. I am well versed in thermal analysis and the effects of thermal mass.
I got interested because of the polls showing an international opinion of over 50% believing it wasn't terrorists. When I saw this I felt the government had a responsibility to prove the case. When they didn't and wouldn't, I did an investigation of my own. I used my ability to trouble shoot situations where the investigator is even presented with lies, which is often the case, to conclude the buildings did not come down from fire or the damage from planes. The Silvestein interview was the first bad data point concerning the situation. Then I found more than I needed to support my theory beyond any doubt.
Robert Fox, MSME, P.E.
Engineer (Retired)
degreed & licensed
Thinking people through the world deserve to know what actually took place on 9/11. The official version insults the intelligence of the informed mind. To suppress truth on…
Robert Fox, MSME, P.E.
degreed & licensed
Catheys Valley, CA
Occupation: Engineer (Retired)
Mechanical engineer 15 years in power industry and 15 years in mining industry. Experience in finite element analysis and computer simulations. Construction coordinator for mega-projects. Licensed building contractor. MSME, P.E.
Thinking people through the world deserve to know what actually took place on 9/11. The official version insults the intelligence of the informed mind. To suppress truth on this matter is an affront to the progress of civilization and a perpetuation of mass media manipulation. Regardless of who may be damaged as a result, the truth must be revealed. At the very least, the current story must be debunked whether or not the true story can be determined.
Preston A. Collins, PE
BSEE Electrical Power Systems NCSU
I became suspicious the day of 9/11 as soon the major news reports said they knew who was responsible.
Preston A. Collins, PE
BSEE Electrical Power Systems NCSU
Yelm, WA
Over 45 years experience in the the electric utility industry, including 7 years as an electrical engineer in transmission and distribution design, 12 years in support of Energy Control Center operations including computer programming, 4 years in load research, rate design and wholesale and industrial billing, 8 years in construction accounting and related EDP system design work, and over 15 years rate and regulatory consulting as a management consultant. Instructor of Electrical Circuits and supporting mathematics. Retired 2008.
I became suspicious the day of 9/11 as soon the major news reports said they knew who was responsible.
Alan E. Middleditch, B.Sc, M.Sc, MS, PhD
Engineer (Retired)
B.Sc, M.Sc, MS, PhD (Engineering)
I first suspected controlled demolition when I timed the collapse from the initial videos.I joined Architects and Engineers for 9/11 truth after watching one of their early conferences…
Alan E. Middleditch, B.Sc, M.Sc, MS, PhD
B.Sc, M.Sc, MS, PhD (Engineering)
Agen, IN
Occupation: Engineer (Retired)
BSc Electrical Engineering UMISTMSc computer Engineering UMISTMS Computing, Control & Communications CMUPhD Computational Mechanical Engineering CMU40 years in engineering Industry and academia in USA and Europe.
I first suspected controlled demolition when I timed the collapse from the initial videos.I joined Architects and Engineers for 9/11 truth after watching one of their early conferences in Canada. I was impressed by their restriction of all discussions to the science, avoiding any allocation of blame or speculation of motivation.
Dennis P. Dersch, J-Std-001
Quality Assurance
I was shocked as well as everyone else on the day of the event. Glued to the television and sucking in every bit of information they wanted us…
Dennis P. Dersch, J-Std-001
Baltimore, MD
Occupation: Quality Assurance
Born and raised in Baltimore Maryland. High School Graduate in 1977. Worked in the Electronics Manufacturing business for twenty-five plus years for commercial,medical,and military products.Currently a Quality Assurance Representative at my current place of employment where I have become very adept at reading drawings and Mil Specs and making measurements to be sure what I have on my bench is what it is supposed to be. I am currently J-Std-001 Certified. I'm good at research and reference material. Quality Assurance is all about connecting the dots, dotting the i's and crossing the t's. I have a strong attention to detail.
I was shocked as well as everyone else on the day of the event. Glued to the television and sucking in every bit of information they wanted us to see and hear. Then about 2 years ago I watched some videos and read more info about American history that I absorbed much better than the brainwashing I was taught in school. Not even realizing at the time the buildings fell at nearly free-fall speed. You don't have to be a physics wiz to understand that! I'm ashamed that our political leaders are not in total outrage over the Commission's final report! That in itself is more of an atrocity than the day of 9/11. Until this is resolved America will live in shame! The evidence appears to be overwhelming. The videos don't lie...what they show us is TRUTH! I like so many others didn't realize a 3rd building had even fallen. When you watch and read and the dots start to connect...you will realize what the true meaning of ignorance is bliss really means. I know, and because I know I want the Truth to be known to eveyone. We owe it to us to know the truth! Kudos to AE911.
Kirk Hoefler
Database Administrator
B.S. Industrial Engineering, University of Tennessee, 1987
The evidence supports that 3 WTC buildings were destroyed by demolition on 9/11. It is my feeling that the highest levels of our government were clearly involved in…
Kirk Hoefler
B.S. Industrial Engineering, University of Tennessee, 1987
Johns Creek, GA
Occupation: Database Administrator
B.S. Industrial Engineering, University of Tennessee; Masters in Business Administration.
The evidence supports that 3 WTC buildings were destroyed by demolition on 9/11. It is my feeling that the highest levels of our government were clearly involved in covering up any real investigation.
Reinhard Kern, Dipl.-Ing.
Degreed
Looking to all the contradictions of the 9-11 circumstances, considering the eye widnesses and the evidences, combined with the implausibility of the official investigation: it was a conspiracy…
Reinhard Kern, Dipl.-Ing.
Degreed
Forchheim, BY, Germany
Engineer since 1974, working in the project management for the construction of nuclear power plants in Germany.
Looking to all the contradictions of the 9-11 circumstances, considering the eye widnesses and the evidences, combined with the implausibility of the official investigation: it was a conspiracy !
Aaron Casillas, BFA
Game Design
BFA UCLA
The games I've worked on use simulated or animated physics. There is something strange with the way Twin Towers fell. Mohammed Atta was searching for flying lessons at…
Aaron Casillas, BFA
BFA UCLA
Las Vegas, NV
Occupation: Game Design
I'm a video game designer of 16 years. Mainly dealing with combat and historical pieces.
The games I've worked on use simulated or animated physics. There is something strange with the way Twin Towers fell. Mohammed Atta was searching for flying lessons at Santa Monica College before 1996. He had a translator, a very charismatic older gentlemen. I've never read or heard anything about this fact. Why do I know? Because I was the one that handled their applications. Why do I remember? Because Atta came off angry. The FBI came to the college to collect the applications. We sent them on their way because we did not provide jet lessons only prop.
Michail Chiotinis
Architect & Engineer
Architecture, School of Architecture, Athens, Greece, 2021
WTC 1, 2 & 7 destruction, as presented, simply violate the law of conservation of energy.
Michail Chiotinis
Architecture, School of Architecture, Athens, Greece, 2021
Athens
Occupation: Architect & Engineer
Architect Engineer, with experience mainly on reinforced concrete-frame buildings
WTC 1, 2 & 7 destruction, as presented, simply violate the law of conservation of energy.
Gaspar Paya
B.D. Ind. Design Engineering, UPV, Spain
Personally I found the Official Version of 9/11 too contradictory, and after reviewing all the information that I found about the 9/11 attack I really think they were…
Gaspar Paya
B.D. Ind. Design Engineering, UPV, Spain
Woodside, NY
Interest in Technology, Inventions and Industrial Manufacturing Process.
Personally I found the Official Version of 9/11 too contradictory, and after reviewing all the information that I found about the 9/11 attack I really think they were an internal job. I hope some day we know the truth about all this terrible tragedy that hit the US.
Marian Ontkoc
Architect
Slovak Technical University
all 3 building were pull down by explosions. Structure was designed for plane crash.
Marian Ontkoc
Slovak Technical University
Humenne, Slovakia
Occupation: Architect
master degree in architecture 2009 in FA SUT, Bratislava, Slovakia.
all 3 building were pull down by explosions. Structure was designed for plane crash.
Raymond L. Tisch, BSEE
Sr. Electrical Engineer
BSEE, GMI Engineering and Management Institute, 1996
I was employed by a company that was a tenant at the WTC site. I arrived in the PATH station shortly before 9;00 A.M. I recall arriving at…
Raymond L. Tisch, BSEE
BSEE, GMI Engineering and Management Institute, 1996
Edison, NJ
Occupation: Sr. Electrical Engineer
Graduated 1995 with BSEE from Kettering University (formerly GMI Engineering and Management Institute). I have worked on multiple engineering projects since graduating.
I was employed by a company that was a tenant at the WTC site. I arrived in the PATH station shortly before 9;00 A.M. I recall arriving at the PATH station and seeing smoke in the air. My thought was a trash fire along the tracks was creating this smoke. I expected to depart the train smelling burning trash. Upon exiting the train the smell of smoke reminded me of the same smell I experienced lighting off fireworks during the 4th of July celebrations.
Petition Signatories
Pete Terpak, BSMET
Mountaintop, PA
Occupation: Business Consultant
Education: Penn State University
Pete Terpak, BSMET
Penn State University
Mountaintop, PA
Occupation: Business Consultant
I hold a BSMET from Penn State University. The disciplines that I have studied in theory, lab, and profession include metallurgy, truss design, strength of material, statics, dynamics, kinematic design, etc.. I wrote my senior thesis on creep deformation of materials.
Everything that I have viewed from both sides of this debate and countless documentaries convince me more and more every day that there is something wrong with the official explanation of events. Anyone who has a basic understanding of physics can look at any of the three building fall and know that is simply not possible at that rate. The explanation of the way that the towers fell (specifically the trusses failed) does not make sense to me as someone who has designed trusses.
Allen Whitehead
Elma, WA
Allen Whitehead
Elma, WA
I have a liberal arts bachelor degree in critical thinking.
I have reviewed many articles about the 911 attack and a lot does not add up, especially building 7.
Brian E. Debonee
Manchester, CT
Occupation: Machinist (Disabled Now)
Education: Some college
Brian E. Debonee
Some college
Manchester, CT
Occupation: Machinist (Disabled Now)
trades in: offset printing, small machine repair, machining, computer repair, and computer programming in Basic, and Quick Basic.
When the government got rid of the evidence, and denied everything, I knew then that America was and is a terrorist nation. I have no allegiance to this country anymore. 911 showed me how much our government cares about it's citizens. I now understand why Americans are detested all around the world. What can one say when they can not even trust their own government to safeguard them.
Keith M. Henley-Smith
Melbourne
Occupation: Research Manager
Education: degreed & licensed
Keith M. Henley-Smith
degreed & licensed
Melbourne
Occupation: Research Manager
Over forty years in the Electric steel-making industry as a Melting shop Manager and Technical Director, have developed steel grades and alloys. Now working in R&D in Matmor a unique metal producing technology.
"I recently watched a presentation on the History channel entitled ""the missing evidence."" It took the view that the whole thing was caused by two airplanes. I have never believed this, but I thought it was wise to watch another opinion by a leading Nuclear Physicist from the US and another expert from the UK. At first I was a bit unsure and that they may be some credibility to the 'Official NIST' version. As the experts got into their presentations it became obvious that they knew nothing at all about metals, in particular structural steels and aluminium. I have been employed in the Steel industry for over forty years and have made thousands of tonnes of Rebar grade on electric arc furnaces in the UK, Germany and Australia so I think I may know a bit about that stuff. I also know quite a lot about Aluminium melting and casting. When I heard what these two Experts had to suggest caused the failure of the twin towers I was staggered. How on earth can anyone who is supposed to educated in sciences come up with such rubbish? An interesting thing was that neither of them mentioned WTC7!"
Scott G. Murray
Sherwood Park, AB, Canada
Occupation: Non Destructive Testing Technician
Scott G. Murray
Sherwood Park, AB, Canada
Occupation: Non Destructive Testing Technician
Twenty years in the materials engineering and NDT sector; Fifty years on this planet.
Building Seven did not just fall down on its own . I have watched footage of this building and other buildings collapsing at near freefall speed into its own footprint and have no doubt whatsoever that this was a controlled demolition. The evidence is overwhelming.
Martin J. Mckinnie
North Ogden, UT
Occupation: Dental Technician
Martin J. Mckinnie
North Ogden, UT
Occupation: Dental Technician
Trained Dental Ceramist, with extensive knowledge in metallurgy, Cad-Cam technology and ceramics. 40 years experience and currently retired. Haven't been asleep since the Kennedy assassination.
Our whole corrupt government is now based on these lies. The truth must come out so we can start a new course and establish a true government for the people not corporations. These kind of lies have created a government that makes it impossible for honest government employee's cannot survive.
John E. Basford
Southampton, NY
Occupation: Engineer/Blacksmith
Education: Secondary Modern
John E. Basford
Secondary Modern
Southampton, NY
Occupation: Engineer/Blacksmith
I am predominantly a self educated man. I only took from school that which I needed from it. The ability to read, write and count.. All else, I deemed as propaganda. I have studied marine engineering, mechanical engineering, history and science on my own terms since leaving education. I have written a book and held multiple licences for different vehicles. I have some military training and extensive firearms experience.
9/11 was a highly complex, exquisitely orchestrated and scientifically technical operation carried out by extremely professional operatives. State of the art military equipment and highly competent personnel were employed to bring about the destruction of that which was engineered not to be destroyed. 19 barely trained Arabs who were not qualified to fly a single engine aircraft armed with box cutters performed maneuvers in airliners that would have made veteran combat pilots break out in a cold sweat and scored direct hits on their targets...? Yeah right!
Timothy A. Kotlensky
Houston, TX
Occupation: Professional Archaeologist
Education: MS
Timothy A. Kotlensky
MS
Houston, TX
Occupation: Professional Archaeologist
I am a professional archaeologist in the practice of cultural resources management. I am also an independent researcher of historic industrial sites and material culture with a focus on the history of iron- and steel-making.
I am interested in collaborating with other professionals to develop a physical and online archive of documents, reliable and vetted eyewitness testimonies, and artifacts associated with the destruction of WTC 1, 2, and 7 that demonstrate the likelihood that other, officially-unaccounted means were employed to destroy World Trade Center 1, 2, and 7 on 9/11. I believe that my experience as a professional manager of archaeological collections would be useful to these ends and would help further the goals of Architects and Engineers for 9/11 Truth.
Robert Joos
Wimbledon, ND
Occupation: Farmer
Education: HS
Robert Joos
HS
Wimbledon, ND
Occupation: Farmer
Lifetime experience with metal fabrication and repair of machinery.
Steel and concrete buildings cannot collapse into rubble from building fires, it's impossible.
Austin Whitehead
St Peters, MO
Occupation: Welding Student
Austin Whitehead
St Peters, MO
Occupation: Welding Student
I am a welding student and deal with melted steel everyday.
Towers don't just fall the way they did on 9-11. We are not getting the truth from the media or the government which is not uncommon today. The government and the government controlled media is trying to cover something up that should not be covered up.
Alberto Cubero
PalauSolita I Plegamans, Spain
Alberto Cubero
PalauSolita I Plegamans, Spain
Went to school in London till the age of 16. I've been working as an aluminum window and door installer for more than 20 years.
The evidence is overwhelming. 9/11 was NOT what we were told. The official version just doesn't make any sense. WTC 7, what made it fall like it did? The Twin Towers, blown to dust. By what action? The steel melted beams. How did they melt? How could these three buildings fall so fast, practically disintegrating on their way down? The world needs to know. The official version is obsolete.
Anthony T. Dibenedetto
Newbury, MA
Occupation: Machinist
Education: TRADE SCHOOL. SOME COLLEGE WORK.
Anthony T. Dibenedetto
TRADE SCHOOL. SOME COLLEGE WORK.
Newbury, MA
Occupation: Machinist
A machinist with 30 years experience. Starting from manual to C.N.C. systems. Experience working with various exotic materials ig. Stellite, molybdenum. inconel and more. Tool and die design including fabrication of components with tolerances of +,- .ooo1 in. 0.0025mm. fabrications' predominately for D.O.D.
I am aware of what slag produced via Thermite looks like.
Jason Lawless
Ayr, ON, Canada
Occupation: Teacher
Education: Post Secondary Degree
Jason Lawless
Post Secondary Degree
Ayr, ON, Canada
Occupation: Teacher
Canadian Welding Bureau Certified Structural Steel Welder, 3 YEARS Structural Welding and Cutting experience; BA Geography McMaster University; BEd Brock University; Minor in French
Official story contradicts irrefutable laws of physics.
Dennis Biswane
Grave, VT
Dennis Biswane
Grave, VT
Studied for several years in Met al. Service engineer.
False flag (controlled demolition) Obvious inside job.
Doug Mackerman
Phoenix, AZ
Doug Mackerman
Phoenix, AZ
I am a software engineer by trade and have studied metallurgy although not certified in any (structural) discipline.
I do not believe in the official explanation of the events of 9/11. I believe buildings 1, 2 and 7 were brought down by controlled demolition. I had visited WTC 2 several months prior to 9/11 and thought it odd that the elevators would not take me to all floors. At the time I believed that it was because the spaces were being built out, but now I believe that it would have been necessary in order to strategically place thermite charges. I believe a serious investigation is necessary.
Suzanne M. Klitgaard
Redding, CA
Suzanne M. Klitgaard
Redding, CA
A mother, wife, in school currently in Welding, Metallurgy, Fabrication. Was in Construction in my 20,s, the Food Industry in my 30,s. A truck driver in my 40,s. Now going to college to becoming a Certified Welder-Artist. Studying Herpetology as a hobby. Animal rescue from time to time. Working with Recovery people from time to time. on my spirituality.
911 has always had a BIG FAT question mark attached well before the Twin Towers and Building 7 came perfectly tumbling down. I am very matter of fact and blunt, leaving emotion as a secondary. In the 80,s is when my faith went south and questioned pretty much everything. Today I have come to understanding fear. The evidence is clear...right in front of my face. Why so many people are acting like lemmings boggle my mind. Education and awareness is key to doing something about the truth.It must be exposed. Uncovered. Investigated. The 911 event was in the making YEARS before it took place...
Ericah Thomas
Houston, TX
Occupation: Fabrication
Education: Associates degree. Certified welding inspector
Ericah Thomas
Associates degree. Certified welding inspector
Houston, TX
Occupation: Fabrication
For the past 12 years I've been directly involved in the fabrication of large scale industrial oilfield equipment. Specifically metallurgy and structural integrity, weldability, and compatibility of different grades steel.
On 9/11/2001 I was 15 years old. At the time I believed what I was told regarding the event. That 'bad guys' hijacked planes and crashed them into the towers causing them to collapse. However upon completing high school and college and entering the workforce I ended up in structural fabrication. After being surrounded by steel & fabrication for over a decade now, and conducting my own tests and experiments on fatigue and failure I've come to my own conclusion regarding the collapse of the two towers and WTC 7 which is seldom spoken about. I've researched the grades of steels used in the World Trade Centers construction, and found they were standard materials such as ASTM A36, and ASTM 242 among about 10 other grades. Knowing the yield point of the steel grades in question in addition to fact that melting point is around 2700F and that jet fuel burns at a maximum temp of 1500F, I can say with 100% certainty that it's physically and mechanically impossible that the steel was weakened to the point of collapse due to fire caused by the jet fuel weakening the steel beams (which were also coated with fire retardant). Granted plain Jane carbon steel and even HSLA steel can lose some of its strength at temperatures much lower than its melting point, but there were pools and rivers of molton steel. Fire just can't do that to steel. When we weld HSLA plate it had to be preheated for extended periods of time depending on the specific material. I'm talking about a propane rosebud placed an inch from the surface of a plate and burning at high temps for more than an hour just to prepare the piece for welding. Regarding WTC7, which I had never even heard of until about 3 years ago (thanks to AE911), it's unbelievably obvious that the building fell at free fall speed which would be impossible to do unless there were no lower floors adding resistance and slowing the fall. Meaning those lower floors of resistance had to have their structural support severed. At the very minimum the citizens of the United States, especially the victims and their families of 9/11 deserve an outside investigation of what really happened to the three buildings. I believe the two towers and building 7 are the only buildings in the history of modern construction that have been brought down due to fire.
Zachary Richards
Middleton, NS, Canada
Zachary Richards
Middleton, NS, Canada
Being a carpenter for some time and now a machinist, I have basic knowledge on structures and metallurgy. I have worked on and understand how large commercial buildings are constructed and built to be fire resistant and almost fireproof. With this knowledge I believe it is impossible that the Twin Towers and Building 7 were brought down due to fires.
It is quite clear that the three buildings on 9/11 were brought down in a controlled demolition. A proper and honest investigation on the events of 9/11 needs to be done so the world can know the truth.
Ryan Barnes
Muncie, IN
Ryan Barnes
Muncie, IN
Husband, father, worker. Know when I'm being lied to.
We were and are being lied to. It's quite absurd really that they think we are this gullible.
Thomas J. Sloane, CWI
Canyon Lake, TX
Occupation: Metallurgist, Welding Expert, Certified Welding Inspector, Struc
Education: University of Texas at San Antonio
Thomas J. Sloane, CWI
University of Texas at San Antonio
Canyon Lake, TX
Occupation: Metallurgist, Welding Expert, Certified Welding Inspector, Struc
Welding expert. AWS certified welding inspector. Structural Steel inspector (AWS D1.1). Metallurgist
I highly doubt the structural integrity of the buildings were heated beyond a yield point that would cause near free-fall speed of the towers' destruction.
Mark J. Smith
Braintree
Occupation: Mechanical Engineer
Education: student
Mark J. Smith
student
Braintree
Occupation: Mechanical Engineer
It's blatantly obvious that there was a huge '3rd wheel' involved in the destruction of the towers, sadly, I believe that the 3rd wheel was the US government.
Michael H. Bratonja
Mequon, WI
Michael H. Bratonja
Mequon, WI
45 years working steel and its alloys and some metallurgy and metalography classes in college.
A lot of nonsense. I know what happens with steel and have worked with it from its beginning as an ore to its final product.
Norbert J. Sindermann
Niddatal, Germany
Occupation: Mech. Eng & Welding Technologist
Education: Fachhochschule Koblenz Germany & STLVA Munich
Norbert J. Sindermann
Fachhochschule Koblenz Germany & STLVA Munich
Niddatal, Germany
Occupation: Mech. Eng & Welding Technologist
Design, Projecting, Project Management, Sales of Automatic Manufacturing and Inspection Equipment
Clear traces of thermite used as cutting/melting agent.
John W. Welsh
Ingleside, TX
Occupation: Welding Inspector
Education: High School Graduate
John W. Welsh
High School Graduate
Ingleside, TX
Occupation: Welding Inspector
I am a high school graduate and I have been working as a welder in the offshore fabrication industry and now I am a welding inspector for a total of 17 years now. As an inspector I have learned a lot about metallurgy.
There is too much evidence that points toward that this was perpetrated by our own government. They must think we are all stupid or something. Most people know what a controlled demolition looks like. Whether it's a building or large amounts of earth being blown up. They both have a timed sequence.
Leonard Munroe
Welland, ON, Canada
Occupation: Mechanical Engineering Technician
Education: Degreed
Leonard Munroe
Degreed
Welland, ON, Canada
Occupation: Mechanical Engineering Technician
I have completed 4 years as a mechanical engineering technician. I have taken classes such as metallurgy, physics and many others that really help to understand how these collapses did not happen as they were portrayed.
I believe 9/11 absolutely did not happen how the media and the rest of the world portrays it. Anyone who can look past what the U.S Government and NIST has told us, and use their own head, can easily see this was a classic controlled demolition. There are way too many unknowns and impossibilities for all these events to happen as the U.S Government says it did.
Matthew Bispo
West Babylon, NY
Occupation: Union Ironworker
Education: Some college
Matthew Bispo
Some college
West Babylon, NY
Occupation: Union Ironworker
I have been watching 9/11 videos for 15 years. It's about time the truth comes out about how it was planned. I'm a union Ironworker of 12 years and know the characters and reactions of steel beams and columns.
Steel I beams do not melt from office fires, it takes a torch or some other kind of chemical reaction. Even if the jet fuel 'could' melt steel, the free fall speed isn't realistic. If 4-6 floors collapsed onto others and then others etc., eventually the remaining 40-60 floors would give great resistance and slow the speed of destruction down significantly.
Hitesh Patel
Auckland, New Zealand
Occupation: Sales Manager
Education: University of Auckland
Hitesh Patel
University of Auckland
Auckland, New Zealand
Occupation: Sales Manager
Bachelor of Chemical and Materials Engineering (1999) Have worked in mining, metallurgy, chemical processing, oil and gas, food and beverages for the last 20 years. Have gained Masters of Business and Technology (UNSW, 2006)
I 100% support any movement or uncovering the truth behind this calamity.
Alex E. Gutierrez
Daly City, CA
Occupation: Welding Engineer
Education: California Poly Technic Univeristy, San Luis Obispo and Ohio State University
Alex E. Gutierrez
California Poly Technic Univeristy, San Luis Obispo and Ohio State University
Daly City, CA
Occupation: Welding Engineer
Have been in welding, fabrication and manufacturing industry for over 30 years.
I don't believe the official story about what happen on 9/11. As an engineer, there are too many un-answered questions.
Roger L. Madison
Davis, CA
Occupation: Construction
Education: BA
Roger L. Madison
BA
Davis, CA
Occupation: Construction
I am fortunate enough to have had a multi disciplinary college degree that emphasized critical thinking. By trade and interest I am familiar with concrete, steel, and building practices.
The destruction of the three towers as documented by video absolutely defies any official narrative about airline collisions or fires. The rapid collapse so resembling a planned demolition can only be explained as being exactly that.
Claude A. Amacher
RomanelSurMorges, Switzerland
Occupation: Retiered
Education: Engineer-Technician ETS, The School of Engineering and Management Vaud, Switzerland, 1974
Claude A. Amacher
Engineer-Technician ETS, The School of Engineering and Management Vaud, Switzerland, 1974
RomanelSurMorges, Switzerland
Occupation: Retiered
Electronic engineer & Service Engineer ARL Applied Research Lab (Bausch & Lomb div.) Metallurgical analysis (X-probe, spark analysis, etc ...) Project Manager (Networking, Power distribution for schools, Hospital, Security for Banks, etc ...) Retired (since 2016)
Some problems with the official story.... 1) The near free fall of 3 buildings (Twin Towers and WTC 7) the same day is very strange 2) Violation of Newton Law 3) Very, very high level of steel corrosion (sulfur) produced by which kind of reaction? 4) Temperature max of normal fires do not reach the melting point of steel 5) Microspheres found in the dust (exothermic reaction due to thermite thermate ?) 6) Fireman heard a lot of explosions 7) Some pictures show holes like Swiss cheese and in the Ground floor the steel pillars was cut at 45' (like demolition). I believe that UL (safety consulting and certification company) made a real good job to calculate and erect these towers. This was either an inside job at the US government level or a false flag operation.
Nathan D. Albrecht
Crown Point, IN
Occupation: Union Boilermaker
Nathan D. Albrecht
Crown Point, IN
Occupation: Union Boilermaker
High school graduate 4 year apprenticeship on structural steel construction and metallurgy.
Disgusting how the first investigation was handled. We the American people deserve a truly independent investigation to uncover what really happened.
Ian Mesman
Rhinebeck, NY
Ian Mesman
Rhinebeck, NY
I work as a crane operator. I have been to tech schools and have a good understanding of metallurgy.
I've been in the engineering field most of my life and I've found the NIST report on the buildings collapse to be inconsistent with the events of the day especially Building 7.
Luigi H. Santos
Warwick, RI
Occupation: Metallurgist
Education: URI
Luigi H. Santos
URI
Warwick, RI
Occupation: Metallurgist
I've been involved with non-precious and precious metal castings . Annealing metals, wire drawing. The process of MFG all types of steel findings and wire drawing for chain of all metals.
This was a well planed demolition. The single most successful demolition I have ever witnessed. There was likely A Thermite reaction of aluminum oxide blast media common makeup is Al2O3. There was nothing in an office building that could create a Crucible atmosphere needed to melt steel. Yet I watched as molten metal sprayed out of the side of the Twin Towers. The buildings fully Engulfed in Flames could have gone on burning for days without any serious structure damage. Yet to fall completely to the ground in ten seconds in just over one hour was a perfect demolition and nothing more.