The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Angelo Tofalo, Engineer
Geotechnical Engineer
Civil Engineer
I think it was a great controlled disaster caused not by plane's impact but for other factors. I suppose the real cause was explosions bua i hope to…
Angelo Tofalo, Engineer
Civil Engineer
Salerno, Italy/SA/Campania, Italy
Occupation: Geotechnical Engineer
I'm a 30 Civil Italian Engineer and I want the truth! I live in Salerno, in the South of Italy and I'm looking for contacts in Italy of Architects and Engineers for 09/11 truth!
I think it was a great controlled disaster caused not by plane's impact but for other factors. I suppose the real cause was explosions bua i hope to understand the truth with you!
S Doutriaux, MBA, BEng
B.Eng, MBA
Since 2006 I have reviewed a large amount of evidence that is available on this topic, considered and debated many opinions, met personally and spoke with several core…
S Doutriaux, MBA, BEng
B.Eng, MBA
Riex, Switzerland
Technology startup executive with an engineering degree and an MBA, both from top schools.
Since 2006 I have reviewed a large amount of evidence that is available on this topic, considered and debated many opinions, met personally and spoke with several core members of AE911Truth and other truth-seeking organizations, and I stand with the firm belief that the Twin Tower and Building 7 fell aided by controlled demolition. I do not like to speculate about anything that cannot be proven by scientific fact, and as such I do not hypothesize on what exactly happened on 9/11. I am however convinced there is a much deeper story that needs to be thoroughly and publicly investigated, so that the public at large can come to terms with the truth about what happened on 9/11 and who planned and benefited from it. It is only through society getting to the truth and coming to terms with an even like 9/11 that we can truly start addressing the broader challenges that our world faces, including wars, climate change, and education.
Gary Lamb, BA
High School Science Teacher (Retired)
BA Engineering Science, The Open University, UK, 1986
The many thousands of families and individuals who lost friends and relatives on 9/11 deserve to know what actually happened that day; and the real perpetrators of the…
Gary Lamb, BA
BA Engineering Science, The Open University, UK, 1986
Sydney
Occupation: High School Science Teacher (Retired)
Bachelor degree in Engineering Science. Retired high school science teacher.
The many thousands of families and individuals who lost friends and relatives on 9/11 deserve to know what actually happened that day; and the real perpetrators of the crimes need to be brought to justice. A new, independent, scientific investigation into the collapses of the three towers would provide the first step in that process.
Paul Adams, AIA, LEED AP
M Arch, Colorado University, Denver
I think there are enough questions about the collapse of the Twin Towers and, in particular, Building 7, that further investigation is essential to know what really happened…
Paul Adams, AIA, LEED AP
M Arch, Colorado University, Denver
Denver, CO
Paul Adams is a LEED Accredited Professional through the U. S. Green Building Council, a leading national non-profit coalition on green building, and is considered an expert in sustainable design. He has extensively studied and applied environmentally sound building design to the firm's wide range of residential, commercial, and historic projects. Some of his continuing education studies include the evaluation of the energy use of a given design. He has also studied how to effectively generate electricity utilizing the sun (photovoltaic), wind and water as well as best sustainable construction practices such as straw bale and rammed earth. While in graduate school at University of Colorado at Denver, Paul was a leader among his peers serving as president of the American Institute of Architecture Students. He was also a finalist in the Walter Wagner Education Forum, a national educational award for architecture. Credentials ' Bachelor of Architecture with Technical Option - Iowa State, 1981 ' Walter Wagner Educational Forum finalist, 1990 ' Master of Architecture - University of Colorado at Denver, 1991 ' Member of the American Institute of Architects, 1984-present ' Licensed to practice architecture in the State of Colorado in 1998 ' Certified by the National Council of Architectural Registration Boards (NCARB) 1999 (Provides for reciprocity of licensure between states) ' LEED Professional Accreditation by the US Green Building Council
I think there are enough questions about the collapse of the Twin Towers and, in particular, Building 7, that further investigation is essential to know what really happened that day.
John C. Westmoreland, PE
BS Electrical Engineering, Lamar Univ
I would like to see truly independent investigation. My gut reaction when I saw the buildings fall for the first time was 'looks like a demolition' - I…
John C. Westmoreland, PE
BS Electrical Engineering, Lamar Univ
San Jose, CA
Electrical Engineering Professional and small business owner. I specialize in embedded systems - virtually all electronic devices that we use in our everyday lives contain some type of embedded system.
I would like to see truly independent investigation. My gut reaction when I saw the buildings fall for the first time was 'looks like a demolition' - I didn't believe the story behind what I saw.
Mark Allen, PhD
Inventor/Business Owner
PhD Engineering, University of Pennsylvania, 1988
From the simplest piece of information alone, free fall speed of collapse, it is not even remotely possible to suggest any hypothesis other than controlled demolition. In other…
Mark Allen, PhD
PhD Engineering, University of Pennsylvania, 1988
San Diego, CA
Occupation: Inventor/Business Owner
PhD Engineering, University of Pennsylvania, 1988. I worked in the defense industry from 1985 to 2001, and in consumer electronics from 1998 to the present. I'm a retired inventor and large business owner. I have extensive scientific and engineering background and experience, particularly in military intelligence.
From the simplest piece of information alone, free fall speed of collapse, it is not even remotely possible to suggest any hypothesis other than controlled demolition. In other words, it is already physically impossible for anything other than controlled demolition to have caused a free fall speed of collapse. The huge mountain of other evidence collected corroborates completely and further proves controlled demolition, although it should be the obvious cause. It was spouted all over the media for one day (9/11/2001) then forbidden and officially called a crazy theory put forth by aluminum foil-hatted conspiracy nuts. The official story claims a conspiracy, where the people involved could not have possibly committed such an intricately planned and difficult demolition. High level people in the military were needed. So the truth of controlled demolition was replaced by an impossible lie about airplanes and their resultant pockets of fire. In addition to being trained to be skeptical, I am so by nature. It was with this approach that I started to study the evidence of 9/11, one thinking this evidence is flawed. It did not take long to be convinced beyond any shadow of doubt that the official story of 9/11 is a planted lie, that three World Trade Center buildings were demolished on purpose, that the Pentagon was hit by a missile, that the Pennsylvania crash did not occur at all, and that the force behind all this horror is a small rogue but extremely powerful group within our own government: the Neocons to be precise.
Samuel G. Green
Senior Designer/Engineer
University of Bristol
I have watched all the evidence and believe there is no physically possible way for three buildings to fall in this way unless it was controlled demolition. Fact.…
Samuel G. Green
University of Bristol
Bristol, United Kingdom
Occupation: Senior Designer/Engineer
I have a Masters in Civil Engineering and a keen interest in Structural Engineering (not that that is needed to question the official story!). I have questioned the reports on 9/11 for many years now and am aware of all the evidence against the theory. I am hoping to get actively involved with the group by using these skills and spreading the message.
I have watched all the evidence and believe there is no physically possible way for three buildings to fall in this way unless it was controlled demolition. Fact. There's not much else to it.
Don Albertson
Mechanical Engineer
Bachelor of Science, Mechanical Engineering, Valparaiso University, 1984
The near perfect free fall seen in all of the public videos and live TV coverage I've watched since the event occurred, can be fully explained only by…
Don Albertson
Bachelor of Science, Mechanical Engineering, Valparaiso University, 1984
Elwood, IL
Occupation: Mechanical Engineer
Bachelor of Science Mechanical Engineering 1981. I have over 35 years of experience applying little more than common sense to engineer types of tasks involved in electrical power plants, refineries, chemical plants, pharmaceutical manufacturers, titanium powder manufacturing, wire shapes manufacturing, water treatment facilities, LNG terminals, pulp/paper plants, and a few I've forgotten.
The near perfect free fall seen in all of the public videos and live TV coverage I've watched since the event occurred, can be fully explained only by analysis of a controlled demolition using thermite. The cover-up by the US government seriously damaged the trust of American citizens but also is a security risk to us as now other countries realize the US does NOT stand up for truth and justice. The WORLD deserves the TRUTH....NOW!
Franklin D. Lemkey, PhD
Consulting Engineer
BSE Metallurgical Engineering, University of Michigan-Ann Arbor, 1960
Did research on nano Al/FexO etc nano layers produced by physical vapor deposition for Joining applications and former student at Dartmouth. After completing his PhD formed a company…
Franklin D. Lemkey, PhD
BSE Metallurgical Engineering, University of Michigan-Ann Arbor, 1960
Palm Beach Gardens, FL
Occupation: Consulting Engineer
BSE 1960 Metallurgical and Chemical, University of Michigan; DPhil 1974 University of Oxford England. Retired Fellow United Technologies Research Center. 1960-2000 Director of Commercialization USIC; 2001 Founded Joint Turbine Coating Co PW- Paton Kiev Ukraine; 1992-2014 Consulting Scientist; 2001-2018 International Center for Electron Beam Technology Ukraine Academy of Science. Kiev Adjunct Professor Thayer School Dartmouth College Visiting Professor Engineering UCONN
Did research on nano Al/FexO etc nano layers produced by physical vapor deposition for Joining applications and former student at Dartmouth. After completing his PhD formed a company to produce nano composites. It was immediately obvious from examination of dust from all three towers that nano materials were used to damage the floors after aircraft impact resulting in smoke clouds of Al2O3 + micron spherical Fe particles. Also the supporting columns were cut using nano thermite.
Jerry L. Clasby, PE, EIT
Retired
BS Mechanical Engineering, University of Washington, 1971
I watched in awe on 9/11. I was shocked to see the symmetrical and precise collapse of the two towers. My doubt was reinforced after I considered the…
Jerry L. Clasby, PE, EIT
BS Mechanical Engineering, University of Washington, 1971
Enumclaw, WA
Occupation: Retired
I graduated from the University of Washington with a Bachelor of Science degree in the field of Mechanical Engineering. I passed the EIT exam while attending UW. Shortly after graduation I obtained the necessary working experience and acquired the commendations of several Professional Engineers to apply for the Washington state Professional Engineer exam. I passed that exam and obtained my Professional Engineering license for the State of Washington. I am now retired.
I watched in awe on 9/11. I was shocked to see the symmetrical and precise collapse of the two towers. My doubt was reinforced after I considered the asymmetrical impact of a massive and heavily loaded airliner. Even with the tremendous momentum that had to be absorbed by those collisions, I still felt that the towers should have collapsed in the direction of the impact. In any case, the collapse of the buildings should have been asymmetrical. I began to accept the unfathomable belief that the administration was involved. After seeing the precision with which building 7 collapsed, I was horrified. To top this off I was amazed at the lack of concern that President Bush displayed upon hearing of such massive destruction while visiting the classroom. It was as though he was acknowledging that fact that the 'operation' was underway. I was terrified by my conclusion. It is unbelievable that a group of individuals would have such callous disregard for human life and property that they would pursue such an undertaking.
Clint Moore, BEng
Design Engineer
BEng Mechatronic Eng, Curtin University of Technology, Perth, Australia, 2002
WTC7 exhibited free fall symmetrical collapse, despite only minor fires.
Clint Moore, BEng
BEng Mechatronic Eng, Curtin University of Technology, Perth, Australia, 2002
Beckenham, WA, Australia
Occupation: Design Engineer
Ultradeep water remote operated vehicle design. Subsea Oil and Gas engineering. Light well intervention and well abandonment.
WTC7 exhibited free fall symmetrical collapse, despite only minor fires.
Stephen O. Sprout
Engineer (Retired)
BS Electrical Engineering, Drexel Institute Of Technology, 1968
Stephen O. Sprout
BS Electrical Engineering, Drexel Institute Of Technology, 1968
Glenside, PA
Occupation: Engineer (Retired)
Drexel University was Drexel Institute of Technology when I attended. Although my degree was in Electrical Engineering, my course work included, physics, chemistry, statics, dynamics, strength of materials, and materials science. I have worked for NASA, the Naval Air and Ship Engineering Center and a number of small OEM electronics manufacturers. My strength is in circuit design for instruments to measure characteristics of solutions (pH, conductivity, turbidity, etc.). I also worked as a qualification engineer in the nuclear power industry.
Petition Signatories
John L. Vodila
Ashland, KY
Occupation: Mechanic/Welder
John L. Vodila
Ashland, KY
Occupation: Mechanic/Welder
Mechanic and welder 25 yrs, Nothing has been the same in my life after 911 and many demand a real investigation. We need closure on many issues surrounding the events of 911.
It is obvious looking at these building failures there is more that needs to be investigated.
Frances H H. Remillard
Kamas Utah, UT
Occupation: Retired
Education: BS chemistry BA drawing and painting
Frances H H. Remillard
BS chemistry BA drawing and painting
Kamas Utah, UT
Occupation: Retired
My husband and I are just regular people. I have a background in chemistry and hydrology. My husband's background is hydrology but includes considerable amount of welding, construction, some demolition and use of explosives.
Prior to 9-11 , my husband and I had watched a PBS documentary on the controlled demolition of a hotel in Salt lake City, Utah. So when we watched the destruction of the Towers on 9/11, the morning it occurred, we recognized it as a controlled demolition that obviously was coordinated with the planes hitting the buildings. We were quite surprised when no one seemed to pick up on that aspect of the 9-11 tragedy. The only part of the demolitions ever talked about was the planes hitting the buildings. We did not learn of WTC 7 demolition for several years. That (failure to report) alone is troubling.
Bradley S. Whitburn, Welder
Antioch, CA
Occupation: Welder
Bradley S. Whitburn, Welder
Antioch, CA
Occupation: Welder
I am currently a Welder at Los Medanos College in Pittsburg. I plan to be an Iron Worker and work on the construction of new buildings and bridges.
My question would be, how much money was spent on fire prevention for one of the most protected buildings in New York? Also, there were apparently fires on only a few floors, so how come the implosion of the building was perfect? I am an American Citizen and pay tax dollars, and would like to know why we are blatantly being lied to.
Corey Roberts, Certified Struct
Crystal River, FL
Occupation: Certified Welder
Education: AWS Certified Welding Certficate
Corey Roberts, Certified Struct
AWS Certified Welding Certficate
Crystal River, FL
Occupation: Certified Welder
I am a 19 year old certified welder. Mostly stick welding (SMAW) steel plate and pipe. Working to obtain tig, mig, and flux core certifications at the present time.
How can NIST say that planes practically cut WTC 1&2 in half, but then leave only a small hole in the pentagon? How did WTC 7 collapse from office fires when no other steel buildings have ever collapsed from fire damage? The case is not closed.
John Petty
New Windsor, MD
Occupation: Welder
John Petty
New Windsor, MD
Occupation: Welder
I am a welder that is familiar with structural loads and capacities of steel at different temperatures. I also understand how steel reacts under a wide range of circumstances.
The Towers' Tops Fell Without Resistance. 9/11 Security Courtesy of Marvin Bush There Were No 800'C Fires in the World Trade Center What Caused the Core of WTC 1 to Fail? 9/11 Firefighters: Bombs and Explosions in the WTC Larry Silverstein, WTC 7, and the 9/11 Demolition Fires Don't Cause Skyscrapers to Collapse. The Fires Were Not Unusually Severe. Vertical Collapses Indicate Demolition. EVIDENCE OF THERMITE
Darryl I. Jones, Welding Student
San Bernardino, CA
Occupation: Welder
Education: Not yet...
Darryl I. Jones, Welding Student
Not yet...
San Bernardino, CA
Occupation: Welder
I'm currently attending college for welding structured steel, learning the different temperatures needed to melt and bind steel.....
I believe that the steel in all 3 WTC building on 9/11 took considerably much more heat than what could have been produced by rocket fuel to cause the collision of such strong steel beams.
Robert W. Crain, Machinist/Welder
Niangua, MO
Occupation: Ham Radio Operator
Education: degreed & licensed
Robert W. Crain, Machinist/Welder
degreed & licensed
Niangua, MO
Occupation: Ham Radio Operator
Jacob L. Rosado
Toledo, OH
Occupation: Welder/Retired
Jacob L. Rosado
Toledo, OH
Occupation: Welder/Retired
Jacob Lagares Rosado, age 52, single, last vacationed in new york, stood directly in front of the WTC Buildings, the week of July the 4th, and noticed the area was still cordoned off with crime tape from the first car bombing attract. Why. Too much time from November of 93 to July of 1994 not being fixed and completed. Why.
I feel that from the 1st day the late president ford appointed dick Cheney to his cabinet, Cheney started to build his circle in every channel possible, for what was to come to we the citizens of the united states of America, for which I believe is total control of the entire world, the oil market, gold, and the worldly used drugs, illegal drugs to install a worldly government we all now know is call, the new world order.
Paul Mann
Mount Olive, AL
Occupation: Structural Welder
Paul Mann
Mount Olive, AL
Occupation: Structural Welder
Dennis D. Scar
Earlham, IA
Occupation: Farmer, Welder
Education: B.S. '71 Farm Op, Iowa State University
Dennis D. Scar
B.S. '71 Farm Op, Iowa State University
Earlham, IA
Occupation: Farmer, Welder
In conjunction with my lifetime of farming, I have also continuously operated my own machinery & metals repair and fabrication business.
The rapid fall of the three WTC buildings, the extremely high temperatures required to melt and vaporize metals, and the presence of super thermite in the dust are just a few of the scientific proofs that have convinced me that the official explanations are not truthful and that we need and deserve a new, independent and comprehensive investigation into the 9-11-2001 tragedy.
Scott A. Jackson
Rocklin, CA
Occupation: Structual Welder
Scott A. Jackson
Rocklin, CA
Occupation: Structual Welder
Structural and pipe welder.
No comment. Just a lot of opinions.
Justin Edwards
Deerfield Beach, FL
Occupation: Skilled Tig Welder
Education: student
Justin Edwards
student
Deerfield Beach, FL
Occupation: Skilled Tig Welder
Kris Saenen
Leuven, Belgium
Occupation: Welding
Education: Welder/Industrial Climber
Kris Saenen
Welder/Industrial Climber
Leuven, Belgium
Occupation: Welding
Electrician, welder, industrial climber, logistics co'rdinator.
Shocked by the first images at the time, and like so many, believed in the official story about hijackers and planes. As time went on (the event never let me go), my gut feeling kept me going back and back to the 9/11 story, simply because there was something off about the whole event and the ensuing wars. Something didn't fit. Until I found Richard Gage's findings on the official story. The pieces started falling into place, and I was again deeply shocked. It is only too clear now that buildings do not come down because of office fire, certainly not steel frame high risers. After much searching, listening, figuring out what some people say, what others say not, .... I can fairly state that I see the why's and the who's in the whole story. A new and independent investigation - in fact, a scientific and a criminal investigation are required. I look forward to both.Sincerely, Kris Saenen
Lester W. Collins
Morrilton, AR
Occupation: Retired
Education: 12
Lester W. Collins
12
Morrilton, AR
Occupation: Retired
I was a carpenter
There is no way in hell that a plane, Large or small could hit a steel building that high up and make it pancake to the ground like that! looks to Me like each floor were exploded with bombs.
William J. Bry, Welder, Metal Fab
Montague, MA
Occupation: Welder, Metal Fabricator
Education: MA Trade Certificate - Metal Fabrication
William J. Bry, Welder, Metal Fab
MA Trade Certificate - Metal Fabrication
Montague, MA
Occupation: Welder, Metal Fabricator
20 years working as a Welder Fabricator and 10 years in NASCAR racing in New England.
The official explanation is an insult to my intelligence. http://www.billbry.com/
Jeffrey B. Olen, Welder
Helmetta, NJ
Occupation: Welder
Education: Degreed
Jeffrey B. Olen, Welder
Degreed
Helmetta, NJ
Occupation: Welder
I Graduated Salutatorian as a Welder from Middlesex County Vocational and Technical High School East Brunswick Campus in 1993. I attended Middlesex County College for a degree in Civil Construction Engineering Technologies. Before I finished my degree I left to pursue a feild in Welding.
All most instantly after 9/11 but before I knew what I was looking @ in regards to the clean up of the cut steal structure of the fallen towers. I had noticed that the slag on the cut beams was rather heavy and not characteristic of an Oxy-Acetylene or Oxy-Mapp Gas cutting torch. This was the first hint that something was not Right
John D. Larsen
Mesquite, TX
Occupation: Welder
John D. Larsen
Mesquite, TX
Occupation: Welder
One of the many things i did before retiring was build pole signs. I therefore understand metal construction that must be able to sway from high winds. I also understand the heat required to distort or melt steel.
I have never believed the official story as aviation jet fuel under ideal conditions does not burn near, within 1000 degrees, hot enough to melt steel. The core beams were too thick and asbestos wrapped so could never have gotten hot enough. What was burning five weeks later at 1700 degrees?
Elfimoff D. Dmitriy, Engineering Cons
Spb, Russia
Occupation: Welder
Education: SPb Herzen University
Elfimoff D. Dmitriy, Engineering Cons
SPb Herzen University
Spb, Russia
Occupation: Welder
The engineer - technologist of welding manufacture The employee of a protection service
I do not believe the official version Your version I think more probable
Jessica Saatdjian, Bicycle Builder
Santa Cruz, CA
Occupation: Bicycle Builder/Welder
Jessica Saatdjian, Bicycle Builder
Santa Cruz, CA
Occupation: Bicycle Builder/Welder
Botany College major. I've currently dropped out of college to begin apprenticing a bicycle frame builder. I'm learning to weld and am learning about the behavior of steel and aluminum. This has not really been a contributing factor to my belief that the towers were brought down by demolition, but it makes the behavior of the steel in that scenario even more apparent to me.
There is no doubt in my mind that 9/11 was a false flag operation perpetrated by one of the most diabolically corrupt governments of the modern era.
Terry R. D'ostroph, Class A Welder
Rimrock, AZ
Occupation: Certified Welder
Education: 29 Certifications
Terry R. D'ostroph, Class A Welder
29 Certifications
Rimrock, AZ
Occupation: Certified Welder
I Have been a construction, heavy equipment welder for 27 years. I have lived in Ohio, Massachusetts, now in Arizona. I know what makes steel give.
I would have to be extremely stupid to believe that the trade towers fell from what the media has repeatedly said at the time of the incident, and to the present time. Does the word implosion come to mind?
Steven A. Sanders, Welder Fabricato
Colorado Springs, CO
Occupation: Steel Man
Steven A. Sanders, Welder Fabricato
Colorado Springs, CO
Occupation: Steel Man
Philip J. Umling, BS
Centennial, CO
Occupation: Business
Education: BS in Administration
Philip J. Umling, BS
BS in Administration
Centennial, CO
Occupation: Business
Trevor J. Mccracken
Rio Vista, TX
Occupation: Welder
Education: student
Trevor J. Mccracken
student
Rio Vista, TX
Occupation: Welder
Mark W. Freund, Certified Welding
West Allis, WI
Occupation: Manufacturing
Education: AAS
Mark W. Freund, Certified Welding
AAS
West Allis, WI
Occupation: Manufacturing
I have been a certified welder for years, working on several heavy structural constructions. I am an American Welding Society Certified Welding Inspector (actually having received my Cert. ON 09/11/'01), and although not the most experienced, of course, it is evident to me that the truth of what happened on 9/11/'01 has yet to be acknowledged by the U.S. Gov.
As an experienced welder and welding inspector, it is obvious to me that there has been a massive deception on the part of the U.S. Gov. in relation to the events of 9/11/'01 and how those events were brought about. I have read David R. Griffin's books and viewed videos put out by the group AE911Truth, and I believe the sooner our government will accept truthful research into these events, the sooner justice can be served, because eventually, THE TRUTH WILL COME OUT.
Bruce T. Duncanson, Peace General/Me
Columbus, OH
Occupation: Mechanic/Welder
Education: Trade School
Bruce T. Duncanson, Peace General/Me
Trade School
Columbus, OH
Occupation: Mechanic/Welder
I have worked with metal and am sure that kerosene (similar to jet fuel) will not make steel melt or explode. I spent my whole childhood preparing to join the military and become a General. When I was 17 the hippies got a hold of me and I came up with the Peace Army four years later. I am Waging Peace @ War's Pace and think 9/11 truth is the most in-your-face display of the ruling class's morals. 9/11 changed the world; 9/11 truth will change it again.
I spent 2 weeks asking myself, 'Did those buildings REALLY collapse?' When I finally woke up, I realized my disbelief was well-founded, even though I couldn't put it all together. I woke up in '05 and spent many hours looking at videos to be SURE that 9/11 was an inside job. I AM SURE; MY LIFE IS CHANGED. NOW, TO WAKE UP MORE PEOPLE!!!
Lucas W. Randol
Sullivan, IL
Occupation: Welder
Education: student
Lucas W. Randol
student
Sullivan, IL
Occupation: Welder
I work as a welder for a small company in which I have knowledge of reading blueprints for the building of agricultural and other forms of storage tanks.
I have been a supporter of many different organizations for the truth about 9/11. Anywhere from so called conspiracy websites to the Zeitgeist movies and now here at ae911truth.org. I feel that this is one of the best places to break down all the evidence and explain it to those watching. I have had many problems trying to spread the word on the strangeness of the events on 9/11/01 due to confusion and general lack of intellectual ability. However, this is a great place for me to refer people to visit in order to better understand the flaws in the official statements by our government concerning 9/11.
Johnathan D. Douglas
Sioux Falls, SD
Occupation: Welder/Steel Worker/Building Contractor
Johnathan D. Douglas
Sioux Falls, SD
Occupation: Welder/Steel Worker/Building Contractor
I was born on January 15, 1978 in Sioux Falls SD. I share a birthday with the late great Martin Luther King JR and I like to think that some of his cosmic bravado has rubbed off on me but I digress ... I lived in Sturgis SD, home of the Sturgis Motorcycle Rally for the first fourteen years of my life where I became(thanks to biker gangs from all over the world) worldly and independent. I spent the last sixteen years of my life back here in Sioux Falls where I started my own pawn shop at age eighteen ... just for the fun of it really ... I thought ... while at the same time keeping my 60 hr a week full time job as a sales manager for a local furniture and carpet store ... I bought a duplex when i was twenty and tried my luck at being a landlord/income property owner as well as a pawn broker/sales manager ... I did quite well ... Owning my own property introduced me to the fine points of building maintenance and then after a couple of years I progressed to the finer points of home building ... until 9/11/2001 at that point I was doing a stint in Wyoming to pay off some personal loans as a welder/mechanic/cowhand on a cattle ranch five miles wide and ten miles long right in the middle of Cheney territory ... Upon my return to Sioux Falls SD after paying off my debt I disbanded my Pawn shop as my lease was up ... I dropped my income property and became a licensed, bonded, and insured contractor where I became an effective leader of men ... until the Iraq war started ... at that point I immediately stopped paying taxes and let my license, my business ... and my life ... laps into eternal poordom(seemingly) so that I wouldn't have to go to prison for tax evasion ... because I would rather die of being poor then contribute ANYTHING to Bush's form of government ... or go to prison for that matter ... So ... Since I'm now too broke to contribute money to ANY causes my intellect is all I have left to give ...
To me personally ... the title 9/11 debunker DOES NOT EXIST ... because debunking WTC demolition is PHYSICALLY IMPOSSIBLE .... Period!!! Several million tons of high grade welded and bolted 4 inch thick steel box framing does NOT disappear because of a low grade office fire a hundred floors up ... Towers one and two were each effectively three different buildings stacked on top of one another ... Fires at the top would have absolutely NO EFFECT on the under infrastructure which would have to be REMOVED in order for the entire building to disintegrate in mid air into it's own basement like it did ... to the staunch 9/11 debunker I say PROVE IT ... PHYSICALLY SHOW ME with something other then your NIST report and attached simulation ... because if you base your entire debunking career on a simple computer simulation alone(with unverified parameters) ... well let's just say that you might as well tell people without a shadow of a doubt in your mind that the Super Mario Brothers and King Koopa are physically real and fighting each other in down town New York to ... for the first time ever in recorded history of course.
David Rocha
Escondido, CA
Occupation: Welding
Education: student
David Rocha
student
Escondido, CA
Occupation: Welding
i don't have much experience in any one field , but what i do have is the ability to think and apply command sense. i have high school education, and no collage degree, son of a preacher so the truth is what i look for.
in the information that i have gone though concerning 9/11 it is clear to me that , a new investigation needs to go forth, there are many questions that needs to be answered. it is my hope that be signing this Petition are questions will be answered.
Wayne John
Hamilton, ON
Occupation: Welder
Education: degreed & licensed
Wayne John
degreed & licensed
Hamilton, ON
Occupation: Welder
I am a Canadian who cares about his brothers and sisters who are being used and manipulated by a small group of greedy power hungry tyrants.
WTC complex, AAairlines, Dullis AFB, all 3 of these locations are Marvin Bushs' security clients.
John C. Fritzler, Welder And Weldi
Kersey, CO
Occupation: Welder And Inspector
John C. Fritzler, Welder And Weldi
Kersey, CO
Occupation: Welder And Inspector
I have been a welder for over twelve years in which i have built buildings, bridges which both contain A36, A572and A588 steel. In the last six years i have welded on numerous pipelines, plants and refineries in my area. I know what it takes to weld, cut and distort steel of such size as the beams that the WTC were constructed with. I too have been awakened by the efforts of the dvds this petition is involved with. Lets take America back!!!!!
I don't believe for one minute now that those massive buildings were brought down by an aluminum built 767 no matter if the whole cabin were full of fuel. This is obviously a fabricated story to cover up much more than we thought. Until just last week i just accepted the facts that the government had dealt us. Now I'm filled with anger much worse than the day of the so called attacks!!! We should not rest until the truth has been admitted! The people who lost their lives shall be avenged! This makes me wonder whats in store for us in the future.
Luigi G. Dabbicco
Brampton, ON, Canada
Occupation: Specialized Welder
Luigi G. Dabbicco
Brampton, ON, Canada
Occupation: Specialized Welder
I'm a welder. I have done a little bit of work in the structural steel industry. Not enough to know much. I specialize in welding for the mold and die industry.
I believe a new, truly independent investigation is necessary and the true culprits need to be brought to justice. Unfortunately I think those people directly or indirectly involved in the bringing down of the towers are a part of the U.S and foreign governments.
Neil Hagemeister
Davison, MI
Occupation: Welder
Education: Degreed
Neil Hagemeister
Degreed
Davison, MI
Occupation: Welder
Skilled trades welder at at a local automobile factory, retired, loves to ski.
A concern about the way they fell and why there wasn't more large pieces of concrete instead of so much dust.
Robert N. Lignell Jr.
Thousand Palms, CA
Occupation: Welder/Fabricator
Robert N. Lignell Jr.
Thousand Palms, CA
Occupation: Welder/Fabricator
Certified Structural Welder / Fabricator / Machinist, with 30 years experience. married 19 years, concerned Grandfather of (6), 2 girls and 4 boys under the age of 8 years.
TRUTH needs no definition or commission. The official story is a LIE. Anyone who objectively researches even 1 10th of 1 percent that is available on the web, doubt will ultimately arise where none should be.