The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Bharat Bhatia, MEE, MS
Engineer
MEE
I will not stand by and let this type of flagrant violation of our rights to know the truth. And how the rug has been pulled over the…
Bharat Bhatia, MEE, MS
MEE
San Jose, CA
Occupation: Engineer
Engineer for over 30 years working in the semiconductor industry at many Fortune 500 companies. Degree in physics and BSEE/MEE degrees in USA. MS, Nursing.
I will not stand by and let this type of flagrant violation of our rights to know the truth. And how the rug has been pulled over the people of not just the USA but all over the world. Inexcusable and unbelievable.
Pascal Alalinarde, Engineer
Electronic Engineer
B Engineering, Institut National des Sciences Appliquees de Renne France
My doubts about the official version of the 9/11 building collapses started when I realized that the common factor in all three building collapses was free fall speed.…
Pascal Alalinarde, Engineer
B Engineering, Institut National des Sciences Appliquees de Renne France
Cholet, France
Occupation: Electronic Engineer
I have worked for 25 years for a worldwide-known French defense manufacturer. I've worked on many projects developing military radio communication products and warfare systems.
My doubts about the official version of the 9/11 building collapses started when I realized that the common factor in all three building collapses was free fall speed. This is the main point, and a building expert understands that when the upper floor of a building falls at free fall speed, that means that it doesn't encounter any obstacle until it hits the ground. This means that when the floor drops and arrives at the next floor, the second one is already gone, and so on for all floors down to the bottom one. It means that all the floors must fall at the same time. This is of course not compatible with the official story of floors dropping on each other. The free fall result is only possible by using professional explosives, and they require a long time to install.
J Scott Eddy, AIA
Architect
B Arch, University of Southwestern Louisiana, 1982
I hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 ' specifically the…
J Scott Eddy, AIA
B Arch, University of Southwestern Louisiana, 1982
Jackson, MS
Occupation: Architect
I'm the President of Barlow Eddy Jenkins Architects in Jackson MS. I have 30 years experience as an architect and I'm licensed in multiple states. I specialize in healthcare architecture and master planning. I have worked with medical institutions to evaluate existing facilities, to re-configure inpatient beds to maximize operational efficiency and to create specialized inpatient centers and outpatient service which focus on major patient groups requiring unique service delivery and support. I manage the overall production operations of our staff and firm. I was a Hurricane Katrina damage assessment volunteer on the MS gulf coast in 2005-2006.
I hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 ' specifically the collapses of the World Trade Center Towers and Building 7.
Victor L. Buck, BS
Process Manager-Arcelormittal Steel Burns Harbor Indiana
BS Mechanical Engineering Technology, Purdue University- Calumet, 1991
From the visual, audio, physical, and individual testimonial evidence, it is not possible to believe the official account of how the World Trade Center Buildings collapsed, most certainly…
Victor L. Buck, BS
BS Mechanical Engineering Technology, Purdue University- Calumet, 1991
Hammond, IN
Occupation: Process Manager-Arcelormittal Steel Burns Harbor Indiana
B.S. Mechanical Engineering Technology. 25 Years in the steel manufacturing industry. School trained and certified in welding and burning practices. 18 Years in mechanical maintenance & fabrication, including the physical removal of facilities and machinery.
From the visual, audio, physical, and individual testimonial evidence, it is not possible to believe the official account of how the World Trade Center Buildings collapsed, most certainly World Trade Center Building 7 did not collapse from fire alone. The official account of the buildings' collapse is not scientific, not based on review of the buildings remnants, and woefully inadequate in explaining the mechanisms of the buildings' demise.
Carlos Camargo
Architect
University of São Paulo
This event changed the world, and affected all humanity, not just the North American people. As one of the affected humans, and having enough technical knowledge to understand…
Carlos Camargo
University of São Paulo
SO Paulo
Occupation: Architect
Architect and urban planner from the university of S'o Paulo - Brazil. Almost 30 years at the project and construction industry in several countries.
This event changed the world, and affected all humanity, not just the North American people. As one of the affected humans, and having enough technical knowledge to understand the grotesque lie imposed by the official history, I demand a deeper and transparent investigation, made by an independent committee.
Nils El-Himoud, Dipl. Informatik
FH Konstanz
The collapse of the buildings seemed supsicious to me since the first time I saw the videos live in 2001. I am 100% convinced that the official story…
Nils El-Himoud, Dipl. Informatik
FH Konstanz
Friedrichshafen, Baden Württemberg, Germany
I received my degree in Software Engineering at the Fachhochschule Konstanz in 2005. Since then I worked in the business of online marketing and now in the financial sector.
The collapse of the buildings seemed supsicious to me since the first time I saw the videos live in 2001. I am 100% convinced that the official story is not the truth.
Elaine M. Dabrowski, AIA
B Arch
Watching the videos of the Twin Towers exploding into a dust cloud after being hit by planes went against every fundamental principle of structures and basis physics that…
Elaine M. Dabrowski, AIA
B Arch
Portland, OR
I am a Healthcare Architect licensed in California, Oregon and Washington with over 25 years in the field.
Watching the videos of the Twin Towers exploding into a dust cloud after being hit by planes went against every fundamental principle of structures and basis physics that I was taught in architecture school. Though I accepted the official story with great reservation it wasn't until after hearing a lecture in 2007 by the theologian, David Ray Griffin, that I was AWAKENED. ...I recognized my own ignorance of the answers and the perplexity of the complexity of the issue, so I search for truth.
Shalom S. Dickson
Health Minister
B.S. Chemical Engineering, Tennessee Technological University, 1985.
My presence here is primarily to support your efforts because as a chemical engineering major I don't have a lot of experience with buildings and demolition.
Shalom S. Dickson
B.S. Chemical Engineering, Tennessee Technological University, 1985.
Knoxville, TN
Occupation: Health Minister
I obtained a bachelor's degree in chemical engineering in 1985. My first job was working for the Tennessee Department of Air Pollution Control and so I continued my career primarily specializing in environmental engineering. I have also worked for IT Corporation, Boeing, as well as many other companies that I was contracted to as a consultant.
My presence here is primarily to support your efforts because as a chemical engineering major I don't have a lot of experience with buildings and demolition.
Nick Hubof, MArch
M Arch, University of Idaho
Nick Hubof, MArch
M Arch, University of Idaho
Boise, ID
Laurence De Mello
Journalist/Tv Producer
journalism/ media
There is no doubt in my mind that the 9/11 event was a false flag op conducted by *** and ** and ****** The way the event was…
Laurence De Mello
journalism/ media
London, OH
Occupation: Journalist/Tv Producer
British, born in London and educated in the far East and Europe. Father was an officer in the British intelligence services. I have been a high end TV producer for the past 18 years, Covering subjects such as the Mafia, P2, Ambrosian bank/Roberto Calvi affair, the death of the Princess of Wales and Dr David Kelly. Iraq and the pharmaceutical industry. Have a slot as a regular guest correspondent on a radio show in Buenos Aires where we discuss world conspiracies and jet black projects. I have five children and live on a farm. Had my 12 year old child abducted in 2009 to the UK and have been fighting for the past year at The high Court of London for the return of that child. While in court my facebook page was held up as evidence of me being a ''cult member'' because I am a member of several social groups such as '' fight the NWO'' a group that investigates UFO's and jet black project technology and a group that analysis the possibility of the 2012 pole shift! I'm also a member of the Mozart fan group! HMMmm... They rewarded the abductor with my child, even though social services did a full investigation and found me to be a ''good mother'' and ''protective element''! I have no mental illness or drug history yet if one questions today's ''reality'' such as 9/11 being an inside job you are classed as a ''headcase''. I mention this very personal info as feel my interest in government conspiracies has affected my rights in court, Which only encourages me more to fight for truth justice and full disclosure!
There is no doubt in my mind that the 9/11 event was a false flag op conducted by *** and ** and ****** The way the event was presented in the media real time had all the marks of a prepared event, for example, the EARLY BBC reporting of the collapse of the Sullivan building 7,while it was still visibly standing over the correspondents shoulder! Various ''strange'' breathless characters that were interviewed and who gave details that were not witnessed by the majority present to implant false memories in the still shocked public's mind and ad credence to the ''fairytale'. This is a typical method of brainwashing by the CIA, which they learned at the end of WWII from Germany. The removal of the debris so as to hide the condition of the steel girders that had obviously been ''sliced through'' by something. The free fall collapse and the failure for the building to just buckle and lean over as in other large building fire collapse. The constant use of the word ''terrorists'' by the leaders in the early hours. the fat they want us to believe that a fire was so intense that it made a massive building fall free fall and melt steel did not even singe a passport found at the foot of the site which was supposed to be from one of ''the terrorists''. The fact that the ''patsies'' accused of flying the craft attended a flying school in florida that is used by the CIA! and that the local aviation authority was told to ''back off'' when they wanted to do a check on the school pre event. We are led to believe that ''novice pilots'' did what a Luftwaffe pilot would find challenging. The fact that the weekend before the collapse there were power failures in the building and many technicians were seen to be entering and leaving the building throughout the day and night supposedly fixing ''the lights''.The fact that the twin towers security was controlled by a Bush member is also a perfect coincidence. Also how could a building that holds so many people have its escape doors to the roof LOCKED! was that ever officially addressed? I also suspect that the plane that went down in PV was shot down, as the debris was not that expected of a typical commercial plane crash. Also telling is how the US government had the ''Patriot act'' ready to go!UKUSA had already in place various other bills that prepared them for the invasion of the middle east only weeks prior this event. The debris from the collapse was not that of a fire collapse. The fact that the twin tower site was a ''white elephant'' but was acquired only weeks previously by Larry Silverstein who took out an insurance that would cover terrorist attacks by aircraft. The 9/11 event is probably one of the greatest evil plans the world has ever seen where the perpetrators got away with it. They used this to control the middle east and its resources , remove civil liberties like taking candy of a child and then They also collected billions on the insurance and then had the freedom to rebuild what was till then a site that was not free for demolition. talk about perfect! have to hand it to them, they knew the majority of the public are too dumb to believe they would ever do such a thing, yet they did!I have too many comments to make so ! will save it for a forum! excuse any typos
Ken Lucas, PE
Engineer
BS Civil Engineering, University of Connecticut, 1979
My thirst for knowledge has me curious to learn more information about building 7's collapse.
Ken Lucas, PE
BS Civil Engineering, University of Connecticut, 1979
Underwood, WA
Occupation: Engineer
I have 35 years experience as a licensed Professional Engineer.
My thirst for knowledge has me curious to learn more information about building 7's collapse.
Gerard Chevrot, IngéNieur
INSA Lyon
The TRUTH ..only the TRUTH and then JUSTICE as for a criminal investigation, which profits the crime ?
Gerard Chevrot, IngéNieur
INSA Lyon
Saint Sixt, France, France
engineer in physics - consulting in industrial factories
The TRUTH ..only the TRUTH and then JUSTICE as for a criminal investigation, which profits the crime ?
Petition Signatories
Aaron W. Grose
Garden City, MI
Occupation: Welder
Education: student
Aaron W. Grose
student
Garden City, MI
Occupation: Welder
I am not an architect, nor an engineer. I am a welding student with little technical knowledge on the subject at hand.
Though I lack the expertise to determine the nature of the events of 9/11, that based on the technical descriptions of the many experts on the subjects I believe it prudent and advisable to open an investigation on behalf of all affected.
Charlie Taylor
Golden, CO
Occupation: Structural Welder
Charlie Taylor
Golden, CO
Occupation: Structural Welder
I was a structural welder for fifteen years working for Chevron Oil, Gulf Oil, at Edna Coal Mine in Routt County, CO. I worked for Colorado Department of Transportation for ten years as a highway maintenance worker.
I watched TV on 9/11. I remember that day thinking and saying that there was no way that Building 7 could have come down the way it did as a result of a fire. I've built enough structural steel to know that Bldg.7 was demolished internally. The whole result of 9/11 from the two wars that are bankrupting our nation to the loss of our individual freedoms as the result of the patriot act have upset me long before I ever heard of 9-11 Truth.Org.
Steven T. Wilson
Courtice, ON, Canada
Occupation: Retired Metal Worker/Welder
Education: CSA 178.2 Welding Inspector L2
Steven T. Wilson
CSA 178.2 Welding Inspector L2
Courtice, ON, Canada
Occupation: Retired Metal Worker/Welder
I worked in Industrial Construction for over 40 years. I hold 2 trade certificates; one as a Sheet Metal Worker (Union Local 30, Toronto, Ont.) the other certificate as a Welder. I had experience in the construction of Nuclear Power Plants (Pickering and Darlington NGS) as well as work in the oil industry, (Suncor, Ft McMurray Alberta). I was a Welding Supervisor at the Pickering Nuclear Generating Station before going into a Quality Control role at that location. For the past 11 years I have held several positions as a Certified Level ll welding inspector, Canadian Welding Bureau. I have recently retired.
Having fabricated and installed metal structures my whole working career, I have tremendous respect for the skills, education and knowledge of the AE group. I couldn't have done my job without them doing theirs first. I worked from their drawings and details. They are the experts. My sincere gratitude goes out to all of you who have worked so hard for this investigation. The American people and the people of the world need justice.Godspeed.Sincerely Steven T Wilson
Stephanie D. Skaggs
Painesville, OH
Occupation: Welder
Stephanie D. Skaggs
Painesville, OH
Occupation: Welder
I am a welder for the Pipefitters local 120 out of Cleveland Ohio. I have been welding since 1992. I have worked with steel my whole career.
I feel that the World Trade Center buildings 1,2, and 7 were brought down by controlled demolition. I am seeking the truth from our government about what happened that day. I am hoping that the scientific evidence from the investigation will expose the people who are involved.
Steven Cybulski
Contoocook, NH
Occupation: Former Teacher, Welder And Farmer
Education: B.S. Education, UW Stout
Steven Cybulski
B.S. Education, UW Stout
Contoocook, NH
Occupation: Former Teacher, Welder And Farmer
I have worked in the construction business doing residential and light commercial concrete form work. I have also spent over 21 years in the heavy equipment business as a welder/fabricator/machinist, as well as working as an industrial education instructor.
Evidence of explosives found in the rubble and the lack of structural resistance (free fall) during the buildings collapse are suspect to the explanation of why the 3 buildings came down. Molten steel pouring out of one of the Towers before collapse, with no scientific reason for the steel to melt. Aviation fuel and office furniture can't produce the required heat. Unilateral systematic sequenced structural failure, attributed to randomly placed areas of stress (fire and structural damage). It does not add up.
Gary D. Brown, Station Attendant
Toronto, ON, Canada
Occupation: Welder
Education: Ph.D., School of Hard Knocks, Toronto
Gary D. Brown, Station Attendant
Ph.D., School of Hard Knocks, Toronto
Toronto, ON, Canada
Occupation: Welder
After joining Air Canada in May 1987 as a YYZ Ramp Station Attendant I discovered that local management and the executive of my I.A.M.A.W. had a policy in place to jointly make miserable the life of any employee and/or member they chose. After four and one-half years of misery I formally complained to the only person whom I thought I could trust because he was a member of The Order of Canada, Mr. Claude I. Taylor, O.St.J., O.C., and days later I was phoned at home, told not to wear my uniform to work, told not to punch-in and to go straight to the office of the YYZ GM. I was removed from company property, held incommunicado for just four (4) hours, told to sign a sheet of paper or I would be fired. On Dec 02/92 I sent a registered letter to Air Canada's Board of Directors and the ensuing resignation of Mr. Taylor, per the front page of The Financial Post of Dec 11/92 puzzled industry analysts. After a plethora of wrongful dismissals and undue evictions I have, as of today, now been homeless for some sixty-six (66) days stemming from my first undue or any arrest. Signed, Gary David Brown, Station Attendant Emeritus Toronto, ON January 17, 2013
I am looking for answers too. How did building seven, I believe it was, or the last building that fell, fall WITHOUT any aircraft hitting it? Could a bunch of people essentially or actually living in caves on the other side of the planet actually something like 9/11? What is Thermalite?
Joseph R. Staloch
Canby, OR
Occupation: Welder
Joseph R. Staloch
Canby, OR
Occupation: Welder
I'm not a engineer, but I've seen enough campfires to know how things fall in a fire. I am a certified welder and know that metal can withstand temperatures over 2000*. I've seen enough implosions to recognize one when I see one
Sean R. Macdowell
Somerset, CA
Occupation: Machinist
Education: To many to list
Sean R. Macdowell
To many to list
Somerset, CA
Occupation: Machinist
4 years(high school) architectural design, 2 years metal workshop(high school), 7years machinery operator, machinist.
3 inch thick steel girders and I-beams would take 3 times the amount of time to heat up long enough to get them to temperatures to warp or bend than the amount of time and fuel was allowed to burn and still would have not caused the whole structure to be comprised.
George Steen
bordentown, NJ
Occupation: Welder/Fitter
George Steen
bordentown, NJ
Occupation: Welder/Fitter
John Quinn, AS
Englewood, FL
Occupation: Retired Steel Fabricator Executive
Education: AS
John Quinn, AS
AS
Englewood, FL
Occupation: Retired Steel Fabricator Executive
Associate of Science degree 1967 - - Forty five years experience in the design, detailing, fabrication and erection of steel structures.
The damage sustained by Building 7 due its proximity to the Twin Towers could not have caused the collapse of the structure. - - No steel structure of similar size anywhere in the world has ever collapsed due to fire. - - The way it collapsed and the speed with which it did so has only been witnessed in a controlled demolition. - - The explanations offered by NIST are so flawed to make them worthless as to why the collapse occurred. They reek of deflection and coverup.
Christopher L. Owen
Waco, TX
Education: 2 yrs tech school
Christopher L. Owen
2 yrs tech school
Waco, TX
Structural steel welder, 2 years member of the American Welding Society.
In my past experience, I have never seen steel behave in the ways that NIST suggest and would like to see them demonstrate some of these behaviors.
Robert W. Hoff
Garden Grove, CA
Occupation: Precision Welder
Education: AA-Manufacturing
Robert W. Hoff
AA-Manufacturing
Garden Grove, CA
Occupation: Precision Welder
AA degree in Manufacturing Eng., and 30 years experience as a welder/fabricator.
I have personally welded and cut a variety of steel over the span of thirty years. It would be extremely difficult to bring all the internal support beams of the Twin Towers to a high enough temperature to cause complete failure in all of them, much less the many floors below them that were not affected by the resulting fire.
Lewis H. Edwards
Pittsburgh, PA
Occupation: Welder-Fabricater
Education: Welder-Fabricater
Lewis H. Edwards
Welder-Fabricater
Pittsburgh, PA
Occupation: Welder-Fabricater
Thirty-eight years of fabricating and welding all kinds of structural shapes.
From the time that I heard that they got hit to the time that I saw them fall I was thinking that they would have to tip over. It is inconceivable that they could ALL collapse in on themselves. Why do the demolition experts take so long to plan and place what is needed to fall buildings if it happens so consistently without planning? On the other hand I always felt that the elevator shafts acted like a Plenum to feed air to the Jet fuel to increase the rate of burn thus raising the temperature to be hot enough to weaken the surrounding structure. That being said, I can't conceive that could fall straight down.
Ted S. Osmundson
Murrieta, CA
Occupation: Heavy Equipment Operator, Mechanic, Welder, Realtor
Education: HS grad, some college, HDR mechanic from IUOE Local 12
Ted S. Osmundson
HS grad, some college, HDR mechanic from IUOE Local 12
Murrieta, CA
Occupation: Heavy Equipment Operator, Mechanic, Welder, Realtor
71 HS graduate. Attended Weber State University for business and communications in 83 & 84. Completed 6000 hour apprenticeship training for heavy duty repairman in 2000. Worked in a welding shop for 2 years learning basic welding skills. Former oilfield worker with 8 years experience in oil and gas drilling as well as geothermal drilling in Northern California. Former trucking business co owner.
Many unanswered questions about who was behind these criminal attacks on our people and country. The catastrophic failure of these redundantly strong structures combined with a pseudo investigation after the bulk of the buildings had been removed from the scene points to a massive cover up. The treatment of the first responders is also appalling given the fact they were unprotected in an area that was highly contaminated and dangerous to breath in.
Stuart Pearce
Port Aux Basques, NL, Canada
Occupation: Welder/Engineer
Education: student
Stuart Pearce
student
Port Aux Basques, NL, Canada
Occupation: Welder/Engineer
Self taught engineer/design equipment & build what I design. I have 45 years in the steel industry and have worked on high steel, worked in structural steel shops as a fabricator and welder, as well as a field welder. I still hold a journeyman welder certificate and I am retired as an injured worker.
Robert Cunningham
Indianapolis, IN
Occupation: Retired Welder/Fabricator/Machinist
Education: k-12, vocational school
Robert Cunningham
k-12, vocational school
Indianapolis, IN
Occupation: Retired Welder/Fabricator/Machinist
Went through K-12, thereafter attending several schools related to the metalworking field, as well as having been employed in same field for many years.
When viewing the videos of the collapses, the flashes of the explosive cutter charges can be clearly seen, despite their mighty efforts to obscure the fact with the generation of the dust clouds. Building 7 was a straight-up controlled demolition...it happened hours after the previous event(s), and the building was not hit by a plane. The 'official' story is pure, unadulterated hogwash, and the omission of Building 7's destruction in the '9-11 Omission Report' is an insult to the intelligence of the American people.
Nicholas Burtleson
Elk Grove, CA
Occupation: Welder
Education: certified welder
Nicholas Burtleson
certified welder
Elk Grove, CA
Occupation: Welder
I graduated high school in 2007, went to school to get welding certificate for might welding on up to 1/4 inch and also SMAW (stick weld.)vertical up on 1 inch. Worked in the field for 3 years or so and then moved to TX to manage and run a stabilized cement plant for Gulf Coast stabilized materials. Recently moved back to CA. And currently working for a friend who has a small mobile welding service.
In 2001 my father had mentioned that he had no doubt that those building had been brought down with some type of demolition. I was only 11 and I was very defensive of his statement and did not even entertain the notion. Then in 2007 I had a different feeling about the way the war had gone and had watched a few documentaries and it really blew me away. I am convinced just based upon simple physics that there is more than enough reason for a new independent investigation.
Dominic E. Charvet
Grandview, WA
Occupation: Welder/Farmer
Education: Grade 10
Dominic E. Charvet
Grade 10
Grandview, WA
Occupation: Welder/Farmer
Raised on Hop farm. Have seen Hop piking machines burn to the ground in grease fire and steel framework bends to the ground but is in tact.
Why have we not seen any other building fall this way, and why three in a row. Two from top to bottom and one like a regular destruction. Very suspicious. Should have been a lot of steel beams in tact.
Robert A. Kaley
Barrie, ON
Occupation: 15Yrs Steel Fabricator
Education: College Welder/Fitter
Robert A. Kaley
College Welder/Fitter
Barrie, ON
Occupation: 15Yrs Steel Fabricator
Completed Welder/Fitter course Mohawk College mid 80s. Worked in various custom steel fabricating shops in the Hamilton area. 80s and 90s. Also worked as a maintenance welder in an iron foundry for about 5yrs. Experienced at fabricating components for steel structures I-beams, trusses,etc. Very experienced at working with steel. Shearing punching,forming,bending,rolling-while cold. Welding,burning, gouging,melting,heating,annealing,bending-while hot. Familiar with problems of warpage and cracking when fabricating structures.
I have no conclusions about WTC1&2. WTC7 is the one that should not have collapsed. It was not hit by a plane, therefore the fire-proofing insulation was not compromised. There is not enough fuel in office furniture and carpet to weaken steel to the point of collapse. There is not enough oxygen present for this. That is why we filled the blast furnace with coke every morning and turned the blast air on, to melt iron. Lastly, steel structures are always way over engineered to withstand unforeseen occurrences like earthquakes or hurricanes. To think that it was like the proverbial 'straw that broke the camels back' is nonsense.
Kayne J. Maurice
Hamilton, ON, Canada
Occupation: Fabricator/Welder
Education: College
Kayne J. Maurice
College
Hamilton, ON, Canada
Occupation: Fabricator/Welder
Metal fabricator 5yrs, Welder 15yrs. Studied Electrical Engineering Technology.
I agree 100% with the need for a new, non-biased investigation into the crimes of '9/11', as I disagree wholly with the scenarios we've been provided by NIST.
Shaun J. Freeman
Woodridge, IL
Occupation: Master Fabricator For Esco Technologies (Ets Lindgren)/Ex Iron
Education: master welder & fabricator (iron/Steel )
Shaun J. Freeman
master welder & fabricator (iron/Steel )
Woodridge, IL
Occupation: Master Fabricator For Esco Technologies (Ets Lindgren)/Ex Iron
I work on special projects for my company which includes welding, grinding, melting Steele and other metals to produce shielding for my companies clients like: NASA,DEPARTMENT OF DEFENSE,AIR FORCE. MY prior line of work was with local 63 (the iron workers union) where I welded on projects like the Construction of Trump tower here in Chicago.
After working with the same materials used to construct the towers there is absolutely no way the towers could have collapsed in that fashion or at all due to a fire, let alone being at the top of the towers and having jet fuel as the source. I believe NIST FABRICATED its computer model to fit the official story
Justin P. Martia
Tempe, AZ
Occupation: Maintenance Technician/Welder
Education: Arizona State University
Justin P. Martia
Arizona State University
Tempe, AZ
Occupation: Maintenance Technician/Welder
I am a student of engineering in the aerospace concentration at Arizona State University. Before that I was a welder in the aerospace industry for a number of years. We would build parts for military vehicles for a defense contractor. I also worked as a welding fabricator building sandrails and safety roll cages as well as various other custom projects. It was through these jobs where I found my passion which drove me to pursue a degree in engineering.
I remember how I felt on that tragic day. I was in highschool in my morning math class where we watched the horror unfold. I didn't know it then but through years of seeing things that didn't add up, I decided to look more into what happened. Things just never added up. Thanks to the countless patriots that have put out documentaries, done research, and demanded answers, I have seen the truth. I want to continue to help and join the fight to bring the truth out to others and make them aware of the truth.
Jon V. Powell
Accokeek, MD
Occupation: Machinist, Piano Tuner, Trucker, Welder
Education: High school, trade schools, lifelong self learner
Jon V. Powell
High school, trade schools, lifelong self learner
Accokeek, MD
Occupation: Machinist, Piano Tuner, Trucker, Welder
I built and operated a machine shop for 12 years. I then went to work for the U.S. Treasury Department, requiring a security clearance to work in that trade for 15 years. I did two more years in The Department of Defense working around explosives. Earlier in life there was 9 years as a trucker, and concurrently 9 years as a piano tuner/technician. I am an accomplished welder.
I have appropriate credentials in all my trades, all of which require mechanical foresight to do the job right the first time. At age 67 and still active, my experience qualifies me to listen to the evidence, watch the video clips and conclude without a doubt that the official story in a fabrication. I worked around scientists, engineers in my job and recently worked with a physicist in cold fusion research. I may be considered an intelligent layman. Again, in the context of my many years of experience, the collapse of building 7 is recognized as a controlled demolition.
Scott Cole
Veguita, NM
Occupation: Journeyman Welder/Retired
Education: Trade School
Scott Cole
Trade School
Veguita, NM
Occupation: Journeyman Welder/Retired
Journeyman Welder 35 years. I have worked all over Alaska for the oil & Gas from Chevron, Arco, and Unocal.
"Amazingly, The U.S Government would like the American people to believe that these covered-face killers who live in a ""CAVE"" have unraveled the secret of how to outsmart every world power including the U.S. Empire with regard to every form of communication. They have stomped out the U.S. military, NSA, CIA, NATO, U.N. and the intelligence of Israel, U.K. and every other nation that surrounds them."
David Rogers
Arnold, MO
Occupation: Construction/Carpenter Welders
Education: GED
David Rogers
GED
Arnold, MO
Occupation: Construction/Carpenter Welders
Carpenter home builder. Hobby, car builder, hot rods, Motorcycles etc extensive use of steel and fabrication.
Seeing the steel melting running out of the corner was like someone using a cutting torch. If I could cut steel like that with jet fuel/kerosene I wouldn't need a plasma cutter.
William Wriston
Middle River, MD
Occupation: Steamfitter
Education: 5 year apprenticeship
William Wriston
5 year apprenticeship
Middle River, MD
Occupation: Steamfitter
I am a journeyman steamfitter since finishing an apprenticeship through Steamfitters local #438 in 1992.
It is obvious that the lies told can only be believed by a child.
Kurt L. Oppido
San Diego, CA
Occupation: Retired
Education: some college of ythe siskious
Kurt L. Oppido
some college of ythe siskious
San Diego, CA
Occupation: Retired
Trevor Clark
Waverly, WV
Occupation: Welder
Education: West Virginia University Parkersburg
Trevor Clark
West Virginia University Parkersburg
Waverly, WV
Occupation: Welder
4 years of welding/fabricating experience, fully certified
It was an inside job and the families of those lost that day deserve to know the truth
Kelvin E. Read
Buffalo, WY
Occupation: Equipment Operator, Welder
Education: High School Diploma, some college, (computer systems)
Kelvin E. Read
High School Diploma, some college, (computer systems)
Buffalo, WY
Occupation: Equipment Operator, Welder
I have a High school diploma along with 3 semesters of computer systems training. Raised on a farm in Iowa, ranch experience in Wyoming. Currently work in the rural water line/construction business. My specific skill set includes welding, mechanic work, small construction and small/heavy equipment operation. I believe I have a good general understanding of basic physics and commons sense which has lead me to agree with the architects and engineers group stance on 9/11.
Once a skeptic, I began to watch every video/documentary available and researched the web over the last several years. Common sense soon took over regarding the 9/11 event and it began to become quite obvious that the official story is just that a 'Story' and a poorly told one at that.
Anthony Alascio
Pasadena, MD
Occupation: Steamfitter
Anthony Alascio
Pasadena, MD
Occupation: Steamfitter
Steamfitter
Obviously it was a inside job
Rick M. Rondeau
Edmonton, AB, Canada
Occupation: B-Pressure/Structural Welder/Ironworker
Education: College Diploma
Rick M. Rondeau
College Diploma
Edmonton, AB, Canada
Occupation: B-Pressure/Structural Welder/Ironworker
Currently building a downtown steel and concrete high rise. Journeyman senior welder. I also am a certified heavy trailer mechanic and I was working as a video editor for a national television network on 9/11. My father is a pilot and I have not and do not believe the official 9/11 narrative.
Steel structure buildings do not collapse in there own footprint in near 10 seconds. Aluminum structure jets will not penetrate steel and concrete structures no matter how fast they are thrown at them. Very strange live videos were shot on 9/11, and I believe that the major networks that were covering the news were in sync with each other when the tower collapsed on television which I believe should never be the case. They should have been at least slightly out of sync.
Patrick M. Donahue
Philadelphia, PA
Education: Welder Training (WTTI) & some college
Patrick M. Donahue
Welder Training (WTTI) & some college
Philadelphia, PA
Certified welder & metallurgy/ engineer apprentice.
The destruction that happened in NYC on 9/11 defies all laws of physics.
Joseph C. Seonia
Philadelphia, PA
Occupation: Arc Welder
Education: High School
Joseph C. Seonia
High School
Philadelphia, PA
Occupation: Arc Welder
Welder at Budd Company-Currently Retired responsible for welding dies on a Auto Line.
As a welder retired or otherwise, Welding Materials like Iron, Steel, and Aluminum makes me somewhat knowledgeable about these different materials. No way, a Aluminum Airplane would cut through an Iron & Concrete Structure called the Twin Towers, World Trade Center.