The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Stefan Koebsch
Civil Engineer
University of Sydney
What the media tells us doesn't even come close to aligning with engineering principles.
Stefan Koebsch
University of Sydney
Moffat Beach, QLD, Australia
Occupation: Civil Engineer
Civil engineer with 30yrs experience, based in Australia and working in civil engineering within urban development.
What the media tells us doesn't even come close to aligning with engineering principles.
Berton Bremer, AIA
Architect
B Arch, Boston Architectural College, 2001
I think we need a new investigation into WTC 7.
Berton Bremer, AIA
B Arch, Boston Architectural College, 2001
Cambridge, MA
Occupation: Architect
I'm a licensed architect in Massachusetts, and an associate principal at Cambridge Seven Associates Inc. in Cambridge. I've served as project architect for projects including higher education buildings, museums, hotels, and rapid transit stations. I received a Bachelor of Architecture degree from Boston Architectural College, where I was class valedictorian. I serve as Chair of the Practice Faculty at BAC; we are design professionals who advise, teach, and mentor current BAC students.
I think we need a new investigation into WTC 7.
John R. Dwyer, PE
BS Watershed Sciences
I'd like to see a new investigation by an independent, cross-disciplinary panel to openly and impartially examine the evidence and hypotheses regarding the causes of the 9/11 building…
John R. Dwyer, PE
BS Watershed Sciences
Lakewood, CO
Civil Engineer specializing in water resources, hydrology and hydraulics.
I'd like to see a new investigation by an independent, cross-disciplinary panel to openly and impartially examine the evidence and hypotheses regarding the causes of the 9/11 building collapses. I believe the U.S. government investigations to date are flawed and inadequate.
Alek Buriak, BArch
Design/Construction/Engineering
B Arch, Oklahoma State University, 2011
It defies logic and every principle of building design and demolition to claim that these buildings were brought down by anything other than planned demolition.
Alek Buriak, BArch
B Arch, Oklahoma State University, 2011
Edmond, OK
Occupation: Design/Construction/Engineering
I have a five year Bachelors in Architecture and Architectural History/Theory from Oklahoma State University. I have an additional three years professional experience in design, engineering, construction management and fabrication.
It defies logic and every principle of building design and demolition to claim that these buildings were brought down by anything other than planned demolition.
Timothy B. Wiley
Computer Database Specialist
I always thought that all 3 World Trade Center building collapses were due to a controlled demolition of some type. Watching AE911Truth analysis confirmed my suspicions. I was…
Timothy B. Wiley
Knightdale, NC
Occupation: Computer Database Specialist
I am a website designer/database specialist. I specialize in HTM, HTML, PHP, SQL, and MYSQL. I also fully understand PERL and SSL. I repair and create database websites for smaller companies. I work out of the triangle area in the Raleigh, North Carolina. I also run a successful ebay business on the side.
I always thought that all 3 World Trade Center building collapses were due to a controlled demolition of some type. Watching AE911Truth analysis confirmed my suspicions. I was in New York City from Sept 12th through Sept 16th in 2001. I distinctly remember the smell of sulfur and the smell of magnesium in the air downtown through those days. I never put it all together on why those smells were present at the time. Watching AE911Truth confirmed for me the reason why I was smelling sulfur and magnesium in the air. A new and in depth non biased investigation needs to be held on why these hard target structures collapsed. The American people deserve to know the truth. What really happened that day and what really happened to those buildings?
Terrance Kenerly
Patent Examiner
B.S. Electrical Engineering, The University Of Texas at Arlington, 2008
I don't believe that less than 1/4 of a building can fall into the top of 3/4 of a standing building and crash through, fly through, or collapse…
Terrance Kenerly
B.S. Electrical Engineering, The University Of Texas at Arlington, 2008
Fort Worth, TX
Occupation: Patent Examiner
I graduated from University of Texas Arlington with a B.S. in Electrical Engineering. I have been employed with the United States Patent and Trademark office as a patent examiner for 10 years.
I don't believe that less than 1/4 of a building can fall into the top of 3/4 of a standing building and crash through, fly through, or collapse through at free fall speed, terminal velocity or accelerate at the speed of gravity as if the 3/4 of the standing building was not there, due to gravity and desk fires alone. There would not be enough energy in that system to destroy the remaining 3/4 of the building into dust as was seen by the videos. To destroy the remaining 3/4 of the standing building into dust and rubble would require an introduction of more energy by way of explosives, as can be heard from the videos, eyewitness accounts, and forensic evidence. The case would be the same for all 3 World Trade Center towers.
Ondrej Papes, Mech.Eng., PhD
Dipl. Masch.-Ing. ETH
As an engineer, scientist and pilot I always could successfully rely on the power of laws of nature, mastering the corresponding theory while merging it with practical experience.…
Ondrej Papes, Mech.Eng., PhD
Dipl. Masch.-Ing. ETH
BCh, SZ, Switzerland
Born 1978 in Prague, moved to Switzerland 1981, humanistic and mathematics-physics gymnasium (Matura 1998), study of mechanical engineering (Diploma = Master 2003), Phd study of nonlinear continuum mechanics 2003-2009, currently running a private engineering business. Obtained private pilot license (PPL) in 2007. Professional experience includes: mechanical manufacturing, design, calculation and construction of mechanical, electrical and electronic constructions including predictive analytical and numerical calculations, software engineering and programming, microtechnics, bio mechanics, process optimization, worked part time in building industry, in particular heating systems, designed and built control and regulation systems.
As an engineer, scientist and pilot I always could successfully rely on the power of laws of nature, mastering the corresponding theory while merging it with practical experience. 9/11 including its aftermath is not only a capital crime on humanity, but also an affront to the enlightened, humanistic, rational and scientific perception of the world. I've been concerned with 9/11 for several years now, and with all my background, I have no doubts that the official explanation of 9/11 is utterly wrong, deceptive and serves evil. My points are: - No rookie pilots maneuvered the planes manually into the twin towers. The sure handling of the involved flight dynamics and accelerations required considerable skill and experience with the particular plane types and/or an adequately set up auto-pilot or remote control system. A few flight lessons on small single engine piston planes or a simulator lesson cannot possibly give the skill needed for such an operation with a large jet. It is highly likely that a newbie in aviation would not even have found the way to New York, not to mention the inability to properly configure the plane for a stable descent and a first time precise hit of the target in a high g curve. - There is no physical connection between the planes impacts and the collapse of the twin towers. The buildings were properly dimensioned to withstand even bigger plane impacts and most of the fuel was ejected and burned outside. The comparably short fires had neither the required temperature to considerably weaken the steel construction locally, nor had they the duration to compete with the steels thermal conduction quickly dissipating the energy away from the fires core. - Nowhere it becomes more clear that the collapse of the buildings is an event physically decoupled from the plane impacts than in the case of the inexplicable collapse of building 7. Just from a probabilistic standpoint it is next to impossible to have an unintentional, totally symmetric collapse. Just in the case of the twin towers, a hypothetical fatal structural weakness would have led to an asymmetric, partial collapse. The observed collapse pattern including acceleration, symmetry and dust production is only reasonably explicable if assuming an intended, well-planned controlled demolition using coordinated explosives. - No Boeing 757 went down at Shanksville. Anybody studying seriously aircraft accidents for technical or security reasons will not be able to recognize in the available pictures and information the serious report of a genuine aircraft crash of claimed kind and proportions. The lack of debris, dead bodies and the unrealistic size of the site are each for itself proof enough that the story is made up. - No Boeing 757 crashed into the Pentagon. Again the dimension and appearance of the damage do not comply with the claimed aircraft type. All incidents showing serious inconsistency with physical and engineering reality make it imperative to consider a coordinated attempt at misleading public perception and installing the picture of a genuine terrorist attack. Looking at the aftermath, in particular the political implications of 9/11, this goal was unfortunately reached. Nevertheless, the facts of high treason, mass murder and genocide are on the table and must be consequently prosecuted for the sake of a future prosperous world.
Bob Goddard, BS
Retired
BS Electrical Engineering, University of Colorado, 1974
The official story is not credible. I'd like to know the truth.
Bob Goddard, BS
BS Electrical Engineering, University of Colorado, 1974
Boulder, CO
Occupation: Retired
B.S. in Electrical Engineering. I worked in product development and management for a large computer company for 29 years.
The official story is not credible. I'd like to know the truth.
Timothy Roebke
Mechanical Engineer
BS Mechanical Engineering, University of Wisconsin at Madison, 2000.
The official story defies the laws of physics in many ways. There was clearly insufficient caloric content in the fuel that the planes would have had on board…
Timothy Roebke
BS Mechanical Engineering, University of Wisconsin at Madison, 2000.
Bloomington, MN
Occupation: Mechanical Engineer
I received my BS in Mechanical Engineering from the University of Wisconsin-Madison. I have spent the last 13 years working in the power electronics industry, working on both commercial and military contracts. I also spent 6 years in the active and reserve Army.
The official story defies the laws of physics in many ways. There was clearly insufficient caloric content in the fuel that the planes would have had on board to melt the steel structure. There is no historical precedent showing evidence for a steel structured building collapsing as a result of a fire, or a plane impact, much less falling at the speed of gravity, and falling straight down, with all of the floors reduced to rubble. The only known building collapses that bear any resemblance to this failure were those intentionally destroyed with explosives. Furthermore, building # 7 was not hit with a plane.
Richard Linza, I.e.
B.S. Electrical Engineering, OSU
It takes a basic understanding of high school physics to understand that twos building designed to take multiple hits from a Boeing 707 and continue to stand will…
Richard Linza, I.e.
B.S. Electrical Engineering, OSU
Oklahoma City, OK
I am an electrical engineer, and graduate of Oklahoma Statue University.
It takes a basic understanding of high school physics to understand that twos building designed to take multiple hits from a Boeing 707 and continue to stand will be able to take a single hit from a Boeing 767, and remain standing. They will not fall straight down, at near free fall speeds minutes apart. Also two building struck at different locations will not fall in exactly the same way.
Marc Kuttner, Marine Engineer
B.S. Marine Engineering Technology
it doesn't take an engineer to see that the WTC buildings were obviously demolished by pre planted explosives.
Marc Kuttner, Marine Engineer
B.S. Marine Engineering Technology
San Francisco, CA
Active MEBA deep sea member. Coast Guard 2nd engineer's license. B.S. in Marine Engineering Technology from CMA 1996.
it doesn't take an engineer to see that the WTC buildings were obviously demolished by pre planted explosives.
David H. Noble, AIA
Ret. Architect/Attorney
B Architecture, University of California Berkeley, 1967
I wrote 53 letters to Donald Trump about why we need an actual investigation and prosecution of the perpetrators, available upon request.
David H. Noble, AIA
B Architecture, University of California Berkeley, 1967
Seal Beach, CA
Occupation: Ret. Architect/Attorney
I wrote 53 letters to Donald Trump about why we need an actual investigation and prosecution of the perpetrators, available upon request.
Petition Signatories
Robert W. Hoff
Garden Grove, CA
Occupation: Precision Welder
Education: AA-Manufacturing
Robert W. Hoff
AA-Manufacturing
Garden Grove, CA
Occupation: Precision Welder
AA degree in Manufacturing Eng., and 30 years experience as a welder/fabricator.
I have personally welded and cut a variety of steel over the span of thirty years. It would be extremely difficult to bring all the internal support beams of the Twin Towers to a high enough temperature to cause complete failure in all of them, much less the many floors below them that were not affected by the resulting fire.
Lewis H. Edwards
Pittsburgh, PA
Occupation: Welder-Fabricater
Education: Welder-Fabricater
Lewis H. Edwards
Welder-Fabricater
Pittsburgh, PA
Occupation: Welder-Fabricater
Thirty-eight years of fabricating and welding all kinds of structural shapes.
From the time that I heard that they got hit to the time that I saw them fall I was thinking that they would have to tip over. It is inconceivable that they could ALL collapse in on themselves. Why do the demolition experts take so long to plan and place what is needed to fall buildings if it happens so consistently without planning? On the other hand I always felt that the elevator shafts acted like a Plenum to feed air to the Jet fuel to increase the rate of burn thus raising the temperature to be hot enough to weaken the surrounding structure. That being said, I can't conceive that could fall straight down.
Ted S. Osmundson
Murrieta, CA
Occupation: Heavy Equipment Operator, Mechanic, Welder, Realtor
Education: HS grad, some college, HDR mechanic from IUOE Local 12
Ted S. Osmundson
HS grad, some college, HDR mechanic from IUOE Local 12
Murrieta, CA
Occupation: Heavy Equipment Operator, Mechanic, Welder, Realtor
71 HS graduate. Attended Weber State University for business and communications in 83 & 84. Completed 6000 hour apprenticeship training for heavy duty repairman in 2000. Worked in a welding shop for 2 years learning basic welding skills. Former oilfield worker with 8 years experience in oil and gas drilling as well as geothermal drilling in Northern California. Former trucking business co owner.
Many unanswered questions about who was behind these criminal attacks on our people and country. The catastrophic failure of these redundantly strong structures combined with a pseudo investigation after the bulk of the buildings had been removed from the scene points to a massive cover up. The treatment of the first responders is also appalling given the fact they were unprotected in an area that was highly contaminated and dangerous to breath in.
Stuart Pearce
Port Aux Basques, NL, Canada
Occupation: Welder/Engineer
Education: student
Stuart Pearce
student
Port Aux Basques, NL, Canada
Occupation: Welder/Engineer
Self taught engineer/design equipment & build what I design. I have 45 years in the steel industry and have worked on high steel, worked in structural steel shops as a fabricator and welder, as well as a field welder. I still hold a journeyman welder certificate and I am retired as an injured worker.
Robert Cunningham
Indianapolis, IN
Occupation: Retired Welder/Fabricator/Machinist
Education: k-12, vocational school
Robert Cunningham
k-12, vocational school
Indianapolis, IN
Occupation: Retired Welder/Fabricator/Machinist
Went through K-12, thereafter attending several schools related to the metalworking field, as well as having been employed in same field for many years.
When viewing the videos of the collapses, the flashes of the explosive cutter charges can be clearly seen, despite their mighty efforts to obscure the fact with the generation of the dust clouds. Building 7 was a straight-up controlled demolition...it happened hours after the previous event(s), and the building was not hit by a plane. The 'official' story is pure, unadulterated hogwash, and the omission of Building 7's destruction in the '9-11 Omission Report' is an insult to the intelligence of the American people.
Nicholas Burtleson
Elk Grove, CA
Occupation: Welder
Education: certified welder
Nicholas Burtleson
certified welder
Elk Grove, CA
Occupation: Welder
I graduated high school in 2007, went to school to get welding certificate for might welding on up to 1/4 inch and also SMAW (stick weld.)vertical up on 1 inch. Worked in the field for 3 years or so and then moved to TX to manage and run a stabilized cement plant for Gulf Coast stabilized materials. Recently moved back to CA. And currently working for a friend who has a small mobile welding service.
In 2001 my father had mentioned that he had no doubt that those building had been brought down with some type of demolition. I was only 11 and I was very defensive of his statement and did not even entertain the notion. Then in 2007 I had a different feeling about the way the war had gone and had watched a few documentaries and it really blew me away. I am convinced just based upon simple physics that there is more than enough reason for a new independent investigation.
Dominic E. Charvet
Grandview, WA
Occupation: Welder/Farmer
Education: Grade 10
Dominic E. Charvet
Grade 10
Grandview, WA
Occupation: Welder/Farmer
Raised on Hop farm. Have seen Hop piking machines burn to the ground in grease fire and steel framework bends to the ground but is in tact.
Why have we not seen any other building fall this way, and why three in a row. Two from top to bottom and one like a regular destruction. Very suspicious. Should have been a lot of steel beams in tact.
Robert A. Kaley
Barrie, ON
Occupation: 15Yrs Steel Fabricator
Education: College Welder/Fitter
Robert A. Kaley
College Welder/Fitter
Barrie, ON
Occupation: 15Yrs Steel Fabricator
Completed Welder/Fitter course Mohawk College mid 80s. Worked in various custom steel fabricating shops in the Hamilton area. 80s and 90s. Also worked as a maintenance welder in an iron foundry for about 5yrs. Experienced at fabricating components for steel structures I-beams, trusses,etc. Very experienced at working with steel. Shearing punching,forming,bending,rolling-while cold. Welding,burning, gouging,melting,heating,annealing,bending-while hot. Familiar with problems of warpage and cracking when fabricating structures.
I have no conclusions about WTC1&2. WTC7 is the one that should not have collapsed. It was not hit by a plane, therefore the fire-proofing insulation was not compromised. There is not enough fuel in office furniture and carpet to weaken steel to the point of collapse. There is not enough oxygen present for this. That is why we filled the blast furnace with coke every morning and turned the blast air on, to melt iron. Lastly, steel structures are always way over engineered to withstand unforeseen occurrences like earthquakes or hurricanes. To think that it was like the proverbial 'straw that broke the camels back' is nonsense.
Kayne J. Maurice
Hamilton, ON, Canada
Occupation: Fabricator/Welder
Education: College
Kayne J. Maurice
College
Hamilton, ON, Canada
Occupation: Fabricator/Welder
Metal fabricator 5yrs, Welder 15yrs. Studied Electrical Engineering Technology.
I agree 100% with the need for a new, non-biased investigation into the crimes of '9/11', as I disagree wholly with the scenarios we've been provided by NIST.
Shaun J. Freeman
Woodridge, IL
Occupation: Master Fabricator For Esco Technologies (Ets Lindgren)/Ex Iron
Education: master welder & fabricator (iron/Steel )
Shaun J. Freeman
master welder & fabricator (iron/Steel )
Woodridge, IL
Occupation: Master Fabricator For Esco Technologies (Ets Lindgren)/Ex Iron
I work on special projects for my company which includes welding, grinding, melting Steele and other metals to produce shielding for my companies clients like: NASA,DEPARTMENT OF DEFENSE,AIR FORCE. MY prior line of work was with local 63 (the iron workers union) where I welded on projects like the Construction of Trump tower here in Chicago.
After working with the same materials used to construct the towers there is absolutely no way the towers could have collapsed in that fashion or at all due to a fire, let alone being at the top of the towers and having jet fuel as the source. I believe NIST FABRICATED its computer model to fit the official story
Justin P. Martia
Tempe, AZ
Occupation: Maintenance Technician/Welder
Education: Arizona State University
Justin P. Martia
Arizona State University
Tempe, AZ
Occupation: Maintenance Technician/Welder
I am a student of engineering in the aerospace concentration at Arizona State University. Before that I was a welder in the aerospace industry for a number of years. We would build parts for military vehicles for a defense contractor. I also worked as a welding fabricator building sandrails and safety roll cages as well as various other custom projects. It was through these jobs where I found my passion which drove me to pursue a degree in engineering.
I remember how I felt on that tragic day. I was in highschool in my morning math class where we watched the horror unfold. I didn't know it then but through years of seeing things that didn't add up, I decided to look more into what happened. Things just never added up. Thanks to the countless patriots that have put out documentaries, done research, and demanded answers, I have seen the truth. I want to continue to help and join the fight to bring the truth out to others and make them aware of the truth.
Jon V. Powell
Accokeek, MD
Occupation: Machinist, Piano Tuner, Trucker, Welder
Education: High school, trade schools, lifelong self learner
Jon V. Powell
High school, trade schools, lifelong self learner
Accokeek, MD
Occupation: Machinist, Piano Tuner, Trucker, Welder
I built and operated a machine shop for 12 years. I then went to work for the U.S. Treasury Department, requiring a security clearance to work in that trade for 15 years. I did two more years in The Department of Defense working around explosives. Earlier in life there was 9 years as a trucker, and concurrently 9 years as a piano tuner/technician. I am an accomplished welder.
I have appropriate credentials in all my trades, all of which require mechanical foresight to do the job right the first time. At age 67 and still active, my experience qualifies me to listen to the evidence, watch the video clips and conclude without a doubt that the official story in a fabrication. I worked around scientists, engineers in my job and recently worked with a physicist in cold fusion research. I may be considered an intelligent layman. Again, in the context of my many years of experience, the collapse of building 7 is recognized as a controlled demolition.
Scott Cole
Veguita, NM
Occupation: Journeyman Welder/Retired
Education: Trade School
Scott Cole
Trade School
Veguita, NM
Occupation: Journeyman Welder/Retired
Journeyman Welder 35 years. I have worked all over Alaska for the oil & Gas from Chevron, Arco, and Unocal.
"Amazingly, The U.S Government would like the American people to believe that these covered-face killers who live in a ""CAVE"" have unraveled the secret of how to outsmart every world power including the U.S. Empire with regard to every form of communication. They have stomped out the U.S. military, NSA, CIA, NATO, U.N. and the intelligence of Israel, U.K. and every other nation that surrounds them."
David Rogers
Arnold, MO
Occupation: Construction/Carpenter Welders
Education: GED
David Rogers
GED
Arnold, MO
Occupation: Construction/Carpenter Welders
Carpenter home builder. Hobby, car builder, hot rods, Motorcycles etc extensive use of steel and fabrication.
Seeing the steel melting running out of the corner was like someone using a cutting torch. If I could cut steel like that with jet fuel/kerosene I wouldn't need a plasma cutter.
William Wriston
Middle River, MD
Occupation: Steamfitter
Education: 5 year apprenticeship
William Wriston
5 year apprenticeship
Middle River, MD
Occupation: Steamfitter
I am a journeyman steamfitter since finishing an apprenticeship through Steamfitters local #438 in 1992.
It is obvious that the lies told can only be believed by a child.
Kurt L. Oppido
San Diego, CA
Occupation: Retired
Education: some college of ythe siskious
Kurt L. Oppido
some college of ythe siskious
San Diego, CA
Occupation: Retired
Trevor Clark
Waverly, WV
Occupation: Welder
Education: West Virginia University Parkersburg
Trevor Clark
West Virginia University Parkersburg
Waverly, WV
Occupation: Welder
4 years of welding/fabricating experience, fully certified
It was an inside job and the families of those lost that day deserve to know the truth
Kelvin E. Read
Buffalo, WY
Occupation: Equipment Operator, Welder
Education: High School Diploma, some college, (computer systems)
Kelvin E. Read
High School Diploma, some college, (computer systems)
Buffalo, WY
Occupation: Equipment Operator, Welder
I have a High school diploma along with 3 semesters of computer systems training. Raised on a farm in Iowa, ranch experience in Wyoming. Currently work in the rural water line/construction business. My specific skill set includes welding, mechanic work, small construction and small/heavy equipment operation. I believe I have a good general understanding of basic physics and commons sense which has lead me to agree with the architects and engineers group stance on 9/11.
Once a skeptic, I began to watch every video/documentary available and researched the web over the last several years. Common sense soon took over regarding the 9/11 event and it began to become quite obvious that the official story is just that a 'Story' and a poorly told one at that.
Anthony Alascio
Pasadena, MD
Occupation: Steamfitter
Anthony Alascio
Pasadena, MD
Occupation: Steamfitter
Steamfitter
Obviously it was a inside job
Rick M. Rondeau
Edmonton, AB, Canada
Occupation: B-Pressure/Structural Welder/Ironworker
Education: College Diploma
Rick M. Rondeau
College Diploma
Edmonton, AB, Canada
Occupation: B-Pressure/Structural Welder/Ironworker
Currently building a downtown steel and concrete high rise. Journeyman senior welder. I also am a certified heavy trailer mechanic and I was working as a video editor for a national television network on 9/11. My father is a pilot and I have not and do not believe the official 9/11 narrative.
Steel structure buildings do not collapse in there own footprint in near 10 seconds. Aluminum structure jets will not penetrate steel and concrete structures no matter how fast they are thrown at them. Very strange live videos were shot on 9/11, and I believe that the major networks that were covering the news were in sync with each other when the tower collapsed on television which I believe should never be the case. They should have been at least slightly out of sync.
Patrick M. Donahue
Philadelphia, PA
Education: Welder Training (WTTI) & some college
Patrick M. Donahue
Welder Training (WTTI) & some college
Philadelphia, PA
Certified welder & metallurgy/ engineer apprentice.
The destruction that happened in NYC on 9/11 defies all laws of physics.
Joseph C. Seonia
Philadelphia, PA
Occupation: Arc Welder
Education: High School
Joseph C. Seonia
High School
Philadelphia, PA
Occupation: Arc Welder
Welder at Budd Company-Currently Retired responsible for welding dies on a Auto Line.
As a welder retired or otherwise, Welding Materials like Iron, Steel, and Aluminum makes me somewhat knowledgeable about these different materials. No way, a Aluminum Airplane would cut through an Iron & Concrete Structure called the Twin Towers, World Trade Center.
Paul E. Knight
Ottawa, ON, Canada
Occupation: Journeyman Welder
Education: Trade School (College)
Paul E. Knight
Trade School (College)
Ottawa, ON, Canada
Occupation: Journeyman Welder
Three years in Welding school. Studied Metallurgy in my final year. Worked with metal for the last 5 years vigorously. Performed personal experiments on steel based on 9/11 conclusion.
Aside from the obvious violation of physics and eye witness accounts of explosions, the presence of molten steel before and after the collapse in itself is enough to prove the official theory wrong I believe, we know what is required to turn steel into liquid and even if that building crushed itself somehow, the energy created would only ever cause physical deformation. I know the resilience of cold hard steel and the yield strength of those columns would far surpass the strain applied to them. 3 steel skyscrapers blown to dust, is there any other scientific way to explain it? Absolutely not.
Paul G. Giddings
Barrie, ON, Canada
Occupation: Welder/Fitter, Weld Inspector, Weld Instructor
Education: College of trades
Paul G. Giddings
College of trades
Barrie, ON, Canada
Occupation: Welder/Fitter, Weld Inspector, Weld Instructor
I have been in the welding trade in various roles for over 35 years.... I know a bit about how metals melt and react to heat. The official story makes no sense to me at all.
It's a lie they are trying to push on us. I, as a regular Human citizen of earth, cannot swallow the 'official story' (lie), it just makes no sense. As a tradesman in the welding industry for over 35 years, I know a bit about how metals melt and react to heat... 9/11 just makes no sense. I strongly believe that it was a controlled demolition.. why ? Simply because it makes sense. We need the truth to come out, we need you guys to comb through it all and make a logical, scientific and factual truth... whether we like it or not.
Devin Schroeder
Milwaukee, WI
Occupation: Welder & Fabricator, Commercial Diver And Student.
Devin Schroeder
Milwaukee, WI
Occupation: Welder & Fabricator, Commercial Diver And Student.
As a welder and fabricator, I know how steel and metals heat and bend. And I am a truth seeker, free minded individual. I can see baloney all over 9/11.
It was a controled demolition of the Towers and Building 7. And the Pentagon was hit with a cruise missile. People need to get the truth out there. All this that is happening today all started with a lie. The wall, the immigrants, the war, the debt, the surveillance of U.S. citizens. Our rights are gone through the patriot act, all because of this lie. Keep pushing. The truth is worth it.
Eusebie Gherman
Tucson, AZ
Occupation: Construction Estimator
Education: BS Business Management
Eusebie Gherman
BS Business Management
Tucson, AZ
Occupation: Construction Estimator
I have been doing construction estimating for large-scale building projects and civil engineering. As an estimator, I get involved in all facets of building construction. I have witness controlled demolition on various occasions throughout my career. The minute I saw WTC 7 collapse, I thought to myself, 'That looks like a controlled demolition.' I happened to live and work from my home office in Weehawken, NJ, and had a clear view of the Twin Towers and the ominous plums of black smoke enshrouding 'The City.'
Initially, I believed, like most people I knew, that 'WE' were attacked by 'enemies' cuz they were/are jealous of our freedoms. Then several personal life-changing events occurred in the immediate aftermath of 9/11. I traveled outside of the country for the first time in my life for business purposes during 'The Bush Years.' For the first time, I saw and heard world events from a perspective other than the propaganda-oriented US media. Then I hired a Sri Lankan Muslim as a technical assistant. The assistant shared with me certain 'facts' about the 9/11 attacks including a certain group of people who conspicuously took the day off on 9/11 (including 'Lucky Larry'). As time went on, I was drawn more into certain facts concerning 9/11, particularly after seeing the film of WTC 7 collapsing into its own footprint (without even considering the free-fall anomaly). My curiosity led me to the 911 Truth Movement.
Chris A. Geise
Arlington, IN
Occupation: Welder, Metal Fabrication
Education: High School
Chris A. Geise
High School
Arlington, IN
Occupation: Welder, Metal Fabrication
Graduated High school in 1975. I worked on a farm for several years. I took some metal working classes after high school that including welding. I have worked with steel and iron for many years.
After much research into this subject I have come to believe that parts of our government on many levels either caused or allowed the events of 9/11 to happen.
David H. Pletcher
New Lexington, OH
Occupation: Retired
David H. Pletcher
New Lexington, OH
Occupation: Retired
I have worked in the construction industry as an iron worker erecting steel frame buildings for seven years and was a certified welder. Welding experience over 31 years. - - Even though I don't have an engineering degree or any other three letter designation attached to my name, I do have common sense and with my work background know enough about how steel recasts to heat and its strength, to know this DID NOT happen from a aluminum cylinder filled with kerosene smashing into such a structure. Nor did the building simply fall and collapse from an office fire. - - What a Lie these people and government people are telling!!!
I'm not sure why or who is behind all this cover-up and lies but I am sure it has everything to do with MONEY, POWER and GLOBALISM.
Dave C. Bowman
Sandpoint, ID
Occupation: Industrial Refrigeration Design
Education: Some college
Dave C. Bowman
Some college
Sandpoint, ID
Occupation: Industrial Refrigeration Design
45 years maritime. Pipe fabricator then refrigeration technician, then design and project management of same.
I have always been skeptical of how either the north or south tower could possibly collapse in the manner they did from burning jet fuel. And building 7? No way that was not a controlled demolition.
Michael Kessler, Jr.
Conifer, CO
Occupation: Welder, Fabricator, Mechanic.
Education: Trade School
Michael Kessler, Jr.
Trade School
Conifer, CO
Occupation: Welder, Fabricator, Mechanic.
: 3+ years trade school for automotive and heavy equipment mechanics.: 20+ years experience working with heavy steel, welding and fabrication, including countless hours, on site, structural high rise residential and commercial steel fabrication. Under, and above ground MSHA enclosed and confined space welding and fab.
My belief, due to my knowledge and experience is that it is absolutely impossible to take down a skyscraper with an exo-skeletal heavy steel frame with an aluminum built airliner. No matter how much fuel you add to the mix. The 'Official Story is Bunk'
Dean E. Fragola
Pembroke, NH
Occupation: Certified Welder/Hvac Technician
Education: Technical College
Dean E. Fragola
Technical College
Pembroke, NH
Occupation: Certified Welder/Hvac Technician
Welding of steel pipe coupons as well as stainless steel, schedule 5 and 10. Certified welding supports. Licenced plumber, gas fitter, valve technician for power plants, EPA certified refrigerant technician.
Never took a second look at September 11 until 2011 whereby learning through ''unpopular '' media discovered the many inconsistencies and most definitely the resistance of any sort of investigation of the collapsing 3 buildings.
Nina L. Olff
Brookline, MA
Occupation: Former Researcher/Educator And Artist
Education: Master's Degree
Nina L. Olff
Master's Degree
Brookline, MA
Occupation: Former Researcher/Educator And Artist
Born in NYC, lived in Soho, Tribeca in the 1970's. Had a motorcycle accident on the corner of West and Vesey Streets (where Battery Park Housing (?) was being constructed).We all thought the buildings were ugly. Was inside once, took the elevator and felt my stomach on the ground floor. Before moving to the Boston area, I was a jeweler, waitress, bar-tender, rest. manager and day care teacher. I started college at Fordham at Lincoln Center, my dad worked for the NY Times...The smoke was white just before the buildings fell in on themselves at free-fall speed.Fireman heard the bombs. Many people heard the bombs. The molten steel was a result of thermite. I have read just about everything I could on book, DVD, personal interviews with many first responders, Air traffic controller, brother of the co-pilot on the first plane out of Boston. Daniel Lewin worked at MIT, part of the Theory of Computation division at CSAIL. I learned on so many levels that this was a demolition/inside job/ physically impossible, by November of 2001. I met a lot of people who played various roles, which served to confirm what I was piecing together. By December of 2001 there was no science to back up the official narrative. 20 years later and this false flag-inside job served it's purpose. The fact that officials changed the name from 'the pile' (as people involved called it) to ground zero, was telling. That this government got away with this crime and subsequent wars and the legalization of torture is HORRENDOUS. Thank you for doing this important work.
Greg Macpherson
Edmonton, AB, Canada
Occupation: Welder
Education: Welding Engineer
Greg Macpherson
Welding Engineer
Edmonton, AB, Canada
Occupation: Welder
Eleven years in welding and fabrication in structural engineering.
I have not and will not ever believe that the WTC came down due to the aircrafts that hit them. I believe it was (as bad as this sounds) a set up and was done on purpose to go to war. All the documentaries I have watches and interviews lead me to believe it was all set up.