The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Marcello Melis
CEO
La Sapienza Roma Italy
I never believed that the twin towers and building 7 went down because of airplanes. And never believed that an airplane hit the Pentagon. Any attempt to demonstrate…
Marcello Melis
La Sapienza Roma Italy
Roma, Italy
Occupation: CEO
Graduated in 1987, worked with many engineering companies, NASA, European Space Agency and Italian Space Agency. Manager in Space Engineering-Roma, Italy, in former SAFCO, now Agilent, in Lucent Technologies and EMC2. Since 10 years founder and CEO of Profilocolore Srl
I never believed that the twin towers and building 7 went down because of airplanes. And never believed that an airplane hit the Pentagon. Any attempt to demonstrate official explanation is totally against engineering and even common sense.
Brian Timmins, MS, EIT
Environmental Engineer
MS Environmental Engineering, Oregon State University, 2001
Watching the 9/11 commission and the politics surrounding it caused me to question the answers that came from it. As an engineer who understands the fundamentals of science,…
Brian Timmins, MS, EIT
MS Environmental Engineering, Oregon State University, 2001
Washougal, WA
Occupation: Environmental Engineer
MS Environmental Engineering, Oregon State University, 2001. EIT license in Washington. I have over 15 years of experience performing design, installation, and O&M services for innovative environmental remediation technologies. We build equipment and products used to stimulate bacteria to degrade a wide variety of environmental contaminants.
Watching the 9/11 commission and the politics surrounding it caused me to question the answers that came from it. As an engineer who understands the fundamentals of science, I can't imagine how fire brought down Building 7. If Building 7 fell due to something other than fire, then questions regarding the other buildings come into play. I demand a proper investigation into 9/11!
Hector Rodriguez Hdz
Architect
Universidad Anahuac
Hector Rodriguez Hdz
Universidad Anahuac
Mexico Df, Mexico
Occupation: Architect
Steve Stones, BEng
Airframe Design Engineer
BEng, Manchester Metropolitan University, Manchester, England, 1995
The world needs to know the truth. The people in power need to know that we will not stop until a proper investigation is started.
Steve Stones, BEng
BEng, Manchester Metropolitan University, Manchester, England, 1995
Alexandria, ON, Canada
Occupation: Airframe Design Engineer
Educated in the UK with a BEng hons in Integrated Engineering Systems, have spent over 30 years within engineering, the last 21 years in aerospace structural design.
The world needs to know the truth. The people in power need to know that we will not stop until a proper investigation is started.
Jerome Janin, MBA
Engineer & Inventor (6 Patents) & Business Development Manager
Ecole supérieure du Bois - Nantes in France & ESSEC MBA Business School - Cergy Pontoise close to Paris
I rely for this part on experienced construction engineers and professional firefighters, whose statements and analysis are far more accurate and appropriate than anything I could add. I…
Jerome Janin, MBA
Ecole supérieure du Bois - Nantes in France & ESSEC MBA Business School - Cergy Pontoise close to Paris
Paris
Occupation: Engineer & Inventor (6 Patents) & Business Development Manager
Coming from an Engineer and Business Schools background, I worked for more than eleven years for major companies such as 'Groupe Saint Gobain' and 'SHV Energy - Primagaz'. In between, I experienced an entrepreneur position by initiating and co-creating a new generation of plywood panels, 100% renewables. Thus, my specialties are various, from 'day to day' businesses preoccupation such as Purchasing, Marketing, Sales and Business Unit management to a 'helicopter view' position which allowed me to be in close contact with Primagaz Board Members as 'Innovation and Business Development' Director. During my last position, I developed six patents for, among other topics, IoT and future of Energy consumption optimization. Working on an international level helps me to challenge 'habits', maintaining genuine curiosity and an 'open mind'.
I rely for this part on experienced construction engineers and professional firefighters, whose statements and analysis are far more accurate and appropriate than anything I could add. I would just underline that if ''nano-thermite'' was indeed retrieved on the sites of the different 'crashed skyscrapers', one can only honestly doubt the official explanation.
James N. Busby, PE
BSME Mechanical Engineering
Jet fuel does not burn hot enough to melt structural steel. The collapse is obviously a controlled demotion.
James N. Busby, PE
BSME Mechanical Engineering
Brandon, MS
Consulting Engineering practice in Jackson, Mississippi from 1965 until 1997. Served private. government and military clients on all types of projects,
Jet fuel does not burn hot enough to melt structural steel. The collapse is obviously a controlled demotion.
Tiziana Geraci
Architecct-Designer
Architect, Politecnico di Torino, 1986
The people deserve truth. Everything I've studied is against the official account.
Tiziana Geraci
Architect, Politecnico di Torino, 1986
GrugliascoTorino, Italy
Occupation: Architecct-Designer
I am an architect degreed at PoliTo and I am also a designer.
The people deserve truth. Everything I've studied is against the official account.
Rod G. Armstrong
B. Eng (Australia)
The building collapses were clearly suspicious as was the complete lack of air force response. It was a crime, not an act of war, and there should have…
Rod G. Armstrong
B. Eng (Australia)
Cupertino, CA
Although I work in software, I have always had a strong interest (and some training) in mechanical and civil engineering.
The building collapses were clearly suspicious as was the complete lack of air force response. It was a crime, not an act of war, and there should have been a forensic investigation.
Todd Hooper, AIA
Project Architect
Bachelor of Science, Electrical Engineering, Wentworth Institute of Technology, 1999
I hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 ' specifically the…
Todd Hooper, AIA
Bachelor of Science, Electrical Engineering, Wentworth Institute of Technology, 1999
Hooksett, NH
Occupation: Project Architect
Project Architect, Boston and area, architectural degree from Wentworth Institute of Technology, AIA member.
I hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 ' specifically the collapses of the World Trade Center Towers and Building 7.
"Boleslav ""Bolek"" Ryzinski"
Architect
degreed & licensed
As far as I can see, Tower 7 was demolished.
"Boleslav ""Bolek"" Ryzinski"
degreed & licensed
New York, NY
Occupation: Architect
I'm an architect licensed in New York and Connecticut. I'm the owner and president of ABR Builders in NY.
As far as I can see, Tower 7 was demolished.
David A. Remington, BSEE, MSEE
BSEE, MSEE, MS Math, Univ of Colo
It is obvious that these buildings were part of a controlled demolition. Anyone who can watch Richard Gage's presentation will be convinced. Our government owes us an explanation…
David A. Remington, BSEE, MSEE
BSEE, MSEE, MS Math, Univ of Colo
Boulder, CO
Have worked at Los Alamos Scientific Laboratory, and Diablo Canyon Nuclear Plant. Currently run a business in Boulder Colorado.
It is obvious that these buildings were part of a controlled demolition. Anyone who can watch Richard Gage's presentation will be convinced. Our government owes us an explanation of how this could happen. The consequences of such an investigation would have far reaching effects on how our government regards it citizens.
Gary D. Wenger, AIA
Architect
Arizona State University School of Architecture, 1981
I hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 ' specifically the…
Gary D. Wenger, AIA
Arizona State University School of Architecture, 1981
Phoenix, AZ
Occupation: Architect
Principal of Wenger & Associates, a privately held company in Phoenix, AZ .Arizona State University 1979 ' 1981 School of Architecture. Licensed in 10 states and worked on design and construction in 26 different states.
I hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 ' specifically the collapses of the World Trade Center Towers and Building 7.
Petition Signatories
Patrick Frisbie, Owner/Operator
Marietta, GA
Patrick Frisbie, Owner/Operator
Marietta, GA
Although I did not earn a degree, I attended engineering school for a couple of years. I currently own and operate a metal fabrication business.
It is extremely frustrating that there are still people defending the official story.
Christopher Blackburn, Mechanical Desig
Seattle, WA
Christopher Blackburn, Mechanical Desig
Seattle, WA
I am a Mechanical Designer/Drafter, and do some metalwork in my spare time
I want to know the truth about what happened on 9/11 -unpleasant as it may be. Many times daily I remember the image of the woman standing in the huge airliner-shaped hole in the side of one of the towers just before it fell -the place she was standing did not appear overly hot, let alone the mouth of a 2750 degree furnace -I bet she thought the worst was over.
Larry Shaffer
Cherokee, OK
Occupation: Machinist
Larry Shaffer
Cherokee, OK
Occupation: Machinist
Metal fabrication, Machinist (US navy) Welder and mechanic. I am 51 and have worked with metal including Building steel structures, Mining, Sawmills, and was A mil wright. I am currently unemployable with no benefits. Ruptured Disc.
We have been lied to. Put Silverstein on the stand along with anyone who Benifited.
Ronald Roggensack
Creswell, OR
Occupation: Landscape Architecture
Education: BS Landscape Architecture
Ronald Roggensack
BS Landscape Architecture
Creswell, OR
Occupation: Landscape Architecture
Received B.S. in Landscape Architecture, Iowa State University in 1979. Professional practice 1979-1993 in Colorado. I have some experience with building construction and in melting and pouring both brass and steel in the foundry.
In mid-2003 I woke up to the truth of 9/11 after reading The War on Freedom by Nafeez Ahmed. Since then I have used the building collapse information as the strongest evidence of 9/11 having been an inside job. I have found that many people are not very technically-minded and cannot understand these concepts without a credible book or video presentation and have found Richard Gage's presentation and 9/11 Mysteries to be the best.
Michael C. Martin
Mattawamkeag, ME
Occupation: Welding
Education: student
Michael C. Martin
student
Mattawamkeag, ME
Occupation: Welding
21 year old soon to be going to school for welding and metal fabrication.
Although I am no professional engineer or architect, I have long studied the corrupt bush administration since 9/11 and have always felt there is much they would like to keep hidden... what most considered as my ridiculous conspiracy theories now has some evidence to ask real questions.
Kerry Hickey
Perth, WA, Australia
Kerry Hickey
Perth, WA, Australia
I am a Boilermaker/Welder by trade and have worked in the fabrication,construction and maintenance industries for 31 years. Construction on petro-chemical and chemical plants working closely with engineers (structural and piping engineers)I supervise a work group.
Having looked at a lot of footage and understanding how structures are built I can say there is no way fire caused the collapses of any of the buildings.
Jo B. Palmer, Owner
Roby, TX
Occupation: Steel Fabrication, Erection
Jo B. Palmer, Owner
Roby, TX
Occupation: Steel Fabrication, Erection
Maximilian G. Becker
Munich, Bayern, Germany
Occupation: Materialtester
Education: degreed & licensed
Maximilian G. Becker
degreed & licensed
Munich, Bayern, Germany
Occupation: Materialtester
Hi my name is Max and I'm 22 years old. I have 3.5 years in steel tester school, 5 years as Steel tester, material tester in category Steel heat treatment and material technique.
It can not be! Where goes the inner core? If there were any reason to collapse it must fall away from the destruction on the side of the building. It can not be that the WTC collapse into itself.
Pat Audi
Montreal, QC, Canada
Pat Audi
Montreal, QC, Canada
22 Years in Fabrication of Metallic Parts and aircraft engine components. Familiar with strength of materials and design requirements to achieve functional performance.
The free fall nature of the buildings is what struck me. In my opinion, it is very difficult to explain any other way than a controlled demolition.
W D. Olson, ASEE
Portland, OR
Education: ASEE
W D. Olson, ASEE
ASEE
Portland, OR
Electronic engineering and/or related: 15 years Extra class radio amateur: 11 years HVAC, general contractor: 7 years Foundry, welding, metal fab: 9 years
From my HVAC background, I know that hydrocarbon fires don't melt steel without a forced air supply. From my foundry and welding experience with many different metals, I know how long it takes to heat metals (steel) and I know about thermal conduction... it would take many hours of sustained, concentrated heat, to achieve the loss of strength alleged. But even if the steel was hot enough to remove 50% of it's strength, it still would have supported at least 10x it's design loading, since the engineers' design specified a 20x over-rating factor!!
William C. Kendall, Retired
Seymour, IN
Occupation: Drop Forge 34 Years
William C. Kendall, Retired
Seymour, IN
Occupation: Drop Forge 34 Years
After 34 years with Daimler/Chrysler as a Drop Forger, I know how hot steel must be to melt. I also know jet fuel is 4/5 kerosene one of the coolest burning fuels available.
It looked suspicious from the first viewing, I've seen buildings professionally imploded and this was identical.
Russell P. Hembree, Mech.Eng
Marietta, GA
Education: student
Russell P. Hembree, Mech.Eng
student
Marietta, GA
I am currently an engineering student acquiring my B.S. in Mechanical Engineering Technology in December of 2008, this year. My focuses are in thermodynamics, heat transfer, solidworks, and advanced dynamics. With Solidworks advanced flow analyses can be applied to the several modes of heat transfer for further analysis of structures. Also, metallurgy is another focus point along with structures. A vast knowledge of thermodynamics gives experience in combustion reactions and stoichiometry. While my soon upcoming degree is in mechanical, I am also versed in water chemistry as well, which, while it deviates from applicable sciences, it allows for further experience and knowledge of basic and advanced chemical reactions in a laboratory setting. Familiarity with error propagation and other statistical analyses in experimentation are also well within my range of expertise.
The investigations into the collapses are loaded with inconsistencies, missing data, and a lack of experimental data. There is not enough evidence in the official reports to have gained conclusive results or statements. While the evidence shown on this website is rather well presented, it does lack its own experiments performed on various types of structural steel using different modes of heat transfer. Empirical, video, and graphical representations of how heat (convective and radiative) travels through structural steel is needed to refute the most recent investigation's claims. Without this type of evidence to solidify theory, the NIST report will stand. Also, a fully-detailed, graphical representation of WTC-7's frame is needed to perform flow analysis on and simulate its collapse. The NIST investigation does not actually provide heat flow data for the entire-affected structure of the building; they in fact only show its collapse, which a video actually does a better job of showing. I may be mistaken, but was NIST not hired to complete the first investigation into 9/11? Why did they receive a second payment of 20 million dollars to perform a second, alternate investigation into just WTC-7. They should not have been paid a second time for an investigation they should have performed the first time around.
Karl Kristian K. Larsen, Engineering Cons
Östorp, Sk√•ne, Sweden
Occupation: Technically Assistant
Education: Degreed
Karl Kristian K. Larsen, Engineering Cons
Degreed
Östorp, Sk√•ne, Sweden
Occupation: Technically Assistant
20 years experience in fabrication of metal cutting, mold and slicing tools. And 15 years experience in fabrication of adjustable tables, kitchens chairs etc.
Brandon Williamson, Welding Student
Zebulon, NC
Occupation: Welding
Education: student
Brandon Williamson, Welding Student
student
Zebulon, NC
Occupation: Welding
I am a student that is currently pursuing my diploma in welding technology that has an understanding in the reactivities of metals and alloys. I am constantly studying the anatomy of the collapses of the WTC buildings and Pentagon.
If the floors had collapsed on top of themselves (in a pancake fashion) there would have still been those 47 center steel columns rising into the air. It is scientifically impossible for a fuel that is kerosene based to significantly weaken, melt, let alone vaporize steel. The buildings were obviously detonated. All videos showing the collapse show detonations exploding out of the side of the buildings. NIST and FEMA have VERY questionable theories and bogus floor plans of the anatomy of the WTC complex
Kristy L. Frayvolt
Latrobe, PA
Occupation: Technical Engineering
Education: B.S. Welding Technical Engineer, PCT
Kristy L. Frayvolt
B.S. Welding Technical Engineer, PCT
Latrobe, PA
Occupation: Technical Engineering
I am a technical engineering student at Pennsylvania College of Technology with a concentration in welding. I've been in the welding industry for 8 years and counting. Currently, I am welding pipe for a job shop that produces air compressors. Over the years I've been ranked in the top 10% of the welding students in PA during 2003, I've been recognized by the Latrobe Area Chamber of Commerce for Excellence in Education. In between my studies, I tutor CNC programming, Non-Destructive Testing Lvls 1&2, and Metallurgy.
The buildings fell too quickly. Jet fuel burns at roughly 400F, compare that to the burning temperatures to steel, aluminum-copper alloy, and titanium. The b-b shape pellets of oxidized metal that were found on the streets of Ground Zero are similar to those given off from a torch cutting process.
Charles E. Brightman
Syracuse, NY
Occupation: Toolmaker
Charles E. Brightman
Syracuse, NY
Occupation: Toolmaker
Certified Journeyman Toolmaker. Background in mathematics and metallurgy.
The official story of 9/11 is a lie, and it's not even a good one. It is necessary for the American public to know exactly how and why buildings 1, 2, and 7 were brought down. From there, it will be important to bring the true perpetrators to justice.
Jenice M. Story, Executive Assistant
Guerneville, CA
Occupation: Executive Assistant
Jenice M. Story, Executive Assistant
Guerneville, CA
Occupation: Executive Assistant
Christopher A. Grande
Rochester, NY
Occupation: Metallurgy
Christopher A. Grande
Rochester, NY
Occupation: Metallurgy
I have been recycling metal for over 20 yrs. The metallurgy trade involves much manual labor to get all materials into small manageable pieces three ft. and under to get the best price upon sale, in my experience metal does not fail as what happened at the word trade center on 9/11/01. Small scale recycling of cars small sheds and buildings involves the handling up close of all aspects of a structure, vehicle, machine.
What happened on 9/11/01 does not in any way look like an accident,not anyone anywhere had ever seen such an event aside from a planned demolition ,the structural integrity of the three buildings known as the north and south towers and building seven was clearly manipulated to cause a controlled demolition,there is a preponderance of evidence that lends credence to this assertion, physics prove it so. statistically speaking I am very certain that the probabilities of the only three steel structures to collapse as a result of the brief fires observed on 911, for this to occur never before or since but only on that day there and then, those three buildings. it simply cannot happen I do not believe it not for a second!
Stanley J. Glick, BEng
33680 Lacanau, Gironde, France
Education: B. Eng., metallurgy, RPI Troy NY
Stanley J. Glick, BEng
B. Eng., metallurgy, RPI Troy NY
33680 Lacanau, Gironde, France
A native New Yorker born in 1940, I have been living and working in France and Europe since 1967. After five years with Booz Allen & Hamilton, founded and ran a Paris-base consulting and software development firm from 1972 until 1993.
The official 911 narrative of the WTC building collapses does not begin to explain the chemical or physical processses triggered by fire or otherwise capable of pulverising concrete into powder, hurling heavy steel beams hundreds of feet into neighboring buildings, or flinging human body parts onto rooftops. We cannot relent until questions like these are answered and those responsible for the evident controlled demolition of the three WTC buildings that collapsed nine years ago are brought to justice whoever they may be.
Hartmut Klawitter
San Diego, CA
Occupation: Medical X-Ray Service Eng.
Hartmut Klawitter
San Diego, CA
Occupation: Medical X-Ray Service Eng.
Mr. Martin Wolmarans, Plant Inspector
Perth, WA, Australia
Mr. Martin Wolmarans, Plant Inspector
Perth, WA, Australia
Pressure vessel and plant inspector with experience in Non Destructive Exaimnation. Busy studying towards diploma in Metallurgical engineering.
First thought was what they wanted everyone to believe. I have believed for a long time that things did not make sense or add up. Upon looking into all the videos and comments it is ubelievable how anyone can believe the fraudulant official story. The truth has to come out.
Ann E. Donnelly, Former Architect
Lincoln Park, NJ
Occupation: Metalsmith/Studio Artist
Education: BFA student, Montclair State University
Ann E. Donnelly, Former Architect
BFA student, Montclair State University
Lincoln Park, NJ
Occupation: Metalsmith/Studio Artist
BFA Metals, Metalsmith and Studio Artist. Environmentally conscientious/motivated.
There are many 'things' related to the 9/11 Building collapses that have me aware of injustices done to life on site....I had friends perished and the emergency responders who perished and the truth of what happened to make the towers drop like that must be revealed in order for us to go on. Finding the truth is the only way to go. I want to live knowing the truth for those whom I lost.
Ronald J. Syre, Chief Engineer
Pleasant Prairie, WI
Education: Nicolet College
Ronald J. Syre, Chief Engineer
Nicolet College
Pleasant Prairie, WI
I am a retired power plant operator for 35 years. THE STEEL WE WORK WITH IS STABLE AT 2500 degrees F @ 3200 PSIG. It does not fail like wet pasta.
I have experience with hot steel, and it does not fail as these structures have. I HAVE ALSO WORKED IN A STEEL MILL AND AM FAMILIAR WITH ALLOYS AND MELTS. Among my past jobs I was a metallurgical lab technician. I have experience in the certification process, chemistries, and physical testing. ( Pulling thesil and elongation tests )
Jerry W. Anderson
Phillipsville, CA
Occupation: Health Care Provider
Education: Degreed
Jerry W. Anderson
Degreed
Phillipsville, CA
Occupation: Health Care Provider
I am a health care provider. I have some education in architecture from high school and college. I have a certificate in mechanical drafting and I studied metallurgy in college.
I believe that their is a government cover-up regarding WTC destruction. I would like to see all those involved in this act of violence held accountable. I will educate all that will listen to the truth. I think that the more people that know the truth, the less likely that the criminals behind 9-11 will try to pull off another catastrophic event. Truth is power!
Kevin Owsley
Los Angeles, CA
Occupation: Administration
Education: Degreed
Kevin Owsley
Degreed
Los Angeles, CA
Occupation: Administration
Studied metallurgy and aeronautics at Central Missouri State University and am a life-long student of architecture, including load-bearing infrastructures. Currently an accountant/analyst.
The so-called 'collapses' simply could not have occurred according to the official version. There just was not enough aviation gas to MELT the I beams to cause a critical structural failure. The footage of the planes also clearly show that a tremendous amount of fuel was expended on impact. And then the 9/11 commission states that the fuel traveled 78 stories down the elevator shaft to MELT the sub-basement substructures? That is so beyond what's physically possible its ridiculous.
Gerard Canta
North Arlington, NJ
Occupation: Science
Gerard Canta
North Arlington, NJ
Occupation: Science
I'm a songwriter, portrait artist and activist. I was a science major in High School. I got good grades and was told by my guidance counselor that I should become a metallurgist. My studies were geared around material science but I didn't wish to pursue that.
Building 7 appears to have been demolished, possibly because it was no longer safe. It would be nice if it were admitted.
David W. Rickerson
Gulfport, FL
Occupation: Some Metallurgy
David W. Rickerson
Gulfport, FL
Occupation: Some Metallurgy
I began pipe fitting and welding somewhere around 1977. I worked in many refinery's, petro /chem and power plants over the years. In the Mid 90's I continued my education to be an associate welding inspector. Moving south a few years later I changed occupations altogether.
At first, I was sold on the theory we were fed by the administration. Then I started to think about what caused the collapse of WTC 1 and 2 ...JP6 It's kerosene and I owned a kerosene heater at one time. Even though it is high octane it falls short of melting steel, especially steel that is encased in concrete. Then I saw a video of WTC 7 and I started my search to see what happened to that. Simple arithmetic, you cannot knock down 3 buildings with 2 planes... I feel a new inquiry is needed.
Nicholas J. Andrew
London, OH
Occupation: Bronze Casting
Nicholas J. Andrew
London, OH
Occupation: Bronze Casting
I am not an engineer or architect. I work in a bronze casting foundry in London, UK; so I do have some knowledge of melting temps for different metals both ferrous and non ferrous metals.
I have watched a lot of footage taken on 9/11; that is, all edits of Loose Change and footage that people have posted individually. The testimonials of professionals there on the day, and the fact that Building 7 mysteriously caught light and caved in on itself so quickly, has convinced me that something is more than a little fishy.
Michael J. Lillywhite
Ansonia, CT
Occupation: Mechanic/Machinist
Education: degreed & licensed
Michael J. Lillywhite
degreed & licensed
Ansonia, CT
Occupation: Mechanic/Machinist
Machine Repair Technician. Schooled in mechanics, machining principles and metallurgy
There is much overwhelming data to oppose the claim that the Buildings collapsed due to fire. All three looked to be buildings in complete free fall and collapsing within their own footprint. There are far too many variables and unanswered questions on this topic to not impose a full investigation.
Ian Beacom
Calgary, AB, Canada
Occupation: B.sc. Biological Sciences
Education: BSc Biology
Ian Beacom
BSc Biology
Calgary, AB, Canada
Occupation: B.sc. Biological Sciences
Post graduate University of Calgary, B.Sc. Biological Sciences. Worked in Geology and Metallurgical Analysis.
It is imperative that a new investigation be conducted by an independent investigative committee, as the official report regarding the cause of the collapse of the 3 Towers does not match the physical evidence plainly seen. Additionally, when different lines of evidence all support the same conclusions (pre-planned demolition), the strength of the conclusion becomes self evident. Although the direction of the conclusions may require us to re-map our world view, this path must be taken in order to seek the truth regardless of the pain it may cause all of us. Only in doing so can we ever hope to live in a world based on truth, justice and fundamental human rights. Keep up the good scientific work AE911Truth! Humanity thanks you.
Michal Budinsky, Engineering Cons
Olomouc, Czech Republic, Czech Republic
Michal Budinsky, Engineering Cons
Olomouc, Czech Republic, Czech Republic
Mechanical engineer in automotive industry, with skill in metallurgy and solving difficult kinematic mechanisms
Official explanation of the collapse is simply insulting face-smack to the technically thinking part of the human population.
Hans Peter Markus, Dipl.-Ing.
Augsburg, Bayern, Germany
Education: Dipl.-Ing. (TU Freiberg, metallurgist)
Hans Peter Markus, Dipl.-Ing.
Dipl.-Ing. (TU Freiberg, metallurgist)
Augsburg, Bayern, Germany
I studied metallurgy and nowadays I'm an operations manager in a steel plant.
There's a suspicion regarding the entire incident.
Fulvio Rizzini
Brescia, Lombardia, Italy
Occupation: Metallurgy
Fulvio Rizzini
Brescia, Lombardia, Italy
Occupation: Metallurgy
7 September 2011 I studied Metallurgy in Italy in high school and I work in a chemical/mechanical laboratory since 3 years
At first moment I had not understand, the reason was covered by the anger, but then watching the video, I concluded that it's illogical for the experience of everyone, the collapse of the 3 buildings. It isn't essentially a qualification. If there is an explanation we must reconsider the basic physic laws.