The AE911Truth Petition
To the Members of the House of Representatives and of the Senate of the United States of America,
PLEASE TAKE NOTICE THAT:
On Behalf of the People of the United States of America, the undersigned Architects and Engineers for 9/11 Truth and affiliates hereby petition for, and demand, a truly independent investigation with subpoena power in order to uncover the full truth surrounding the events of 9/11/01 – specifically the collapses of the World Trade Center Towers and Building 7. We believe there is sufficient doubt about the official story and therefore the 9/11 investigation must be re-opened and must include a full inquiry into the possible use of explosives that might have been the actual cause of the destruction of the World Trade Center Twin Towers and Building 7.
Featured Petition Signers
Obiora Embry, EIT
Self Employed
BS Engineering, University of Tennessee at Knoxville, 2003
The 'official' statement does not hold water with regards to what caused the towers to fall/implode. When I first saw the video I just assumed that it was…
Obiora Embry, EIT
BS Engineering, University of Tennessee at Knoxville, 2003
Lexington, KY
Occupation: Self Employed
I have a BS degree in Industrial Engineering from the University of Tennessee. I have a wide variety of knowledge about various topics from first hand experience, reading, talking with others, and most importantly, from watching and observing Nature.,
The 'official' statement does not hold water with regards to what caused the towers to fall/implode. When I first saw the video I just assumed that it was a trailer for a new 'The Siege' movie as it looked fake to me.
Muriel Strand, PE
BS SJSU, MS UCB, Mechanical Eng
While I am not in a position to read and personally evaluate every scrap of evidence pertaining to this situation, there are far too many anomalies and unanswered…
Muriel Strand, PE
BS SJSU, MS UCB, Mechanical Eng
Sacramento, CA
1982 RA @ MHB Associates, San Jose CA - - 1982-84 RA @ IESC, San Jose CA - - 1985-86 Designer @ DES, San Francisco CA - - 1986-88 RA @ UCB, Berkeley, CA - - 1988-2005 Air Resources Engineer, CARB, Sacramento CA - - 1997-2000 grad student in economics, CSUS, CA - - 2006 Retired - - 2008 Most sustainable candidate for mayor of Sacramento - - 2009 Most sustainable candidate for CalPERS Board - - www.work4sustenance.blogspot.com
While I am not in a position to read and personally evaluate every scrap of evidence pertaining to this situation, there are far too many anomalies and unanswered questions for me to accept the party line. While I describe myself as a 9/11 agnostic I estimate that the likelihood of the official story is at best 1 in 10.
Alvin J. Martinez, MAS, MS
Retired College Professor
MAS Computer Science (Boston U), MS Engineering-Economic Systems (Stanford)
The evidence of nano-thermite residue in the debris clearly shows that the federal government was behind the WTC disaster.
Alvin J. Martinez, MAS, MS
MAS Computer Science (Boston U), MS Engineering-Economic Systems (Stanford)
San Juan, PR, Puerto Rico
Occupation: Retired College Professor
Education: see aboveExperience:IT field: programmer, systems analyst, system manager, IT manager.Professor: computer science, MIS, management science/operations research, principles of management, strategic management.Writer: Quasi-fictional narratives about current & historical affairs.Website: DiegoAzeta.org
The evidence of nano-thermite residue in the debris clearly shows that the federal government was behind the WTC disaster.
Rich Mccampbell, Bs Cheme
degreed & licensed
The presence of thermite explosives in WTC dust is prima fascia evidence of US involvement in the WTC Towers collapses on 9-11-01. Per the legal requirements of Title…
Rich Mccampbell, Bs Cheme
degreed & licensed
Harwich, MA
Rich McCampbell earned a Bachelor of Science, Chemical Engineering, from the University of Minnesota. He has worked the past seven years as a process engineer in biotech, supporting production of drug substances. The previous 25 years Mr. McCampbell worked as an environmental engineer in the areas of wastewater treatment and hazardous waste management. While working at Otis Air Force Base in 2003, he started to question the government stories about 9-11-01. After the Air Force refused to answer his questions, posed in several FOIA letters regarding typical Air National Guard response times, he began his current mission of exposing the truth about 9-11-01. He is an active member of Boston911truth.org.
The presence of thermite explosives in WTC dust is prima fascia evidence of US involvement in the WTC Towers collapses on 9-11-01. Per the legal requirements of Title 18 Section 2382 of the United States Code I hereby am reporting apparent acts of treason by entities within our own country and possibly within the US Military.
Scott M. Bowman, JD
Loan Tech
JD
If one was wired to blow (Bldg 7), they all were wired to blow. 9/11 was PNAC's recommended 'Pearl Harbor' so US forces would be used to advance…
Scott M. Bowman, JD
JD
Houston, TX
Occupation: Loan Tech
Counselor to the Columbiana County Ohio Militia. Shut down the Blood Games in Montana during the Freeman standoff, forcing the Feds to change their rules of engagement in alleged hostage situations like Ruby Ridge and Waco. Defended top Freeman Dan Petersen at Federal Court in Montana. Exposed the Federal Government's Bio-mass oven complex being built at Ant Hill, Ohio. Law Licenses in Ohio (inactive/1992) & Texas (active/2006). Undergraduate degrees in Political science and Finance.
If one was wired to blow (Bldg 7), they all were wired to blow. 9/11 was PNAC's recommended 'Pearl Harbor' so US forces would be used to advance the Yinon Plan and the Couldenhove-Kalergy Plan for Israel.
Roy W. Svensson
Retired
BS Civil Engineering, Clarkson College of Technology, 1973
"As I entered a conference room the morning of 9/11 where others were watching and saw the trade center towers collapse, I immediately said ""that's a controlled demolition""."
Roy W. Svensson
BS Civil Engineering, Clarkson College of Technology, 1973
Tonawanda, NY
Occupation: Retired
1973 BSCE graduate in civil and environmental engineering. My professional career included working for the Pima County Health Department, a private consulting practice, and being town engineer for Tonawanda, NY. I was a member of the National Society of Professional Engineers for many years.
"As I entered a conference room the morning of 9/11 where others were watching and saw the trade center towers collapse, I immediately said ""that's a controlled demolition""."
Patrick E. James
Tooling Engineer
BS Plastics Engineering Technology, Ferris State University, 1998
The official version of 9/11 is demonstrably false and a proper independent investigation must be undertaken.
Patrick E. James
BS Plastics Engineering Technology, Ferris State University, 1998
Brier, WA
Occupation: Tooling Engineer
I have a BS in plastics engineering technology from Ferris State University. I'm a tooling engineer using injection molding; I also have knowledge and experience in steel performance and metallurgy.
The official version of 9/11 is demonstrably false and a proper independent investigation must be undertaken.
Tamas Geczy, Student - High S
I Am A Graduating Senior High School Stu
student
I have sufficient beliefs to understand that fear is the best and one of the only ways to undermine and control the public. The 9/11 collapse happened too…
Tamas Geczy, Student - High S
student
Chagrin Falls, OH
Occupation: I Am A Graduating Senior High School Stu
I love and enjoy philosophy - and have studied all perspectives surrounding many types of events and ideas. My goal is to understand and comprehend every perspective in this world and regard it with an open mind, thus coming up with my own truth and opinions.
I have sufficient beliefs to understand that fear is the best and one of the only ways to undermine and control the public. The 9/11 collapse happened too quickly - way too quickly with regards to how firm the buildings were engineered. For this and other lengthy claims, I have no doubts that creating fear was an intent by who ever caused it (military project is possible), and thus a re-investigation should be undertaken.
Lindsay P. Caywood, PhD
PhD Engineering U of Utah
Lindsay P. Caywood, PhD
PhD Engineering U of Utah
Edmonton, AB, Canada
2 years National Bureau of Standards, Bolder Colorado, low temperature testing 3 years Sandia Corporation, Livermore, CA materials research None scientific employment after
Glen Poe, Building Contrac
Building Contractor
There is nothing consistent in these building collapses with a collapse from fire that I have seen. They are however exactly consistent with a building demolition. Even before…
Glen Poe, Building Contrac
Berryville, VA
Occupation: Building Contractor
I have been a licensed building contractor for over twenty years. I have seen what fire can do to a structure and I have seen controlled demolition.
There is nothing consistent in these building collapses with a collapse from fire that I have seen. They are however exactly consistent with a building demolition. Even before all the controversy I did not believe that planes brought down these buildings. Instinct alone tells me that. Of course in the case of building 7 we know it was not hit buy a plane and the fires were small. The mountain of evidence available today only confirms what many people already knew. Building fires do not burn uniformly enough to cause that exact of a collapse. In the case of building 7 we know the fires weren't even close to uniform and not nearly hot enough. Its an insult to even people of average intelligence and no training to try and claim these building collapses where the result of fire.
Sajid Yaqub, PE
BSc Civil Engineering, National University of Sciences and Technology Pakistan; MBA Project Management
Beyond a doubt, the WTC buildings were a highly professional controlled demolition job. It must have taken about 6-8 weeks of preparation. The evidence collected and the design…
Sajid Yaqub, PE
BSc Civil Engineering, National University of Sciences and Technology Pakistan; MBA Project Management
Islamabad, Pakistan
I am a graduate civil engineer and a project management specialist with over 25 years of professional experience in construction and M&E of infrastructure, buildings, airfields, roads and highways, tunneling, and small hydel power stations. I have a military background and am an experienced controlled blasting expert, having worked on the tunnel in Azad Jammu Kashmir for a mega hydel power project.
Beyond a doubt, the WTC buildings were a highly professional controlled demolition job. It must have taken about 6-8 weeks of preparation. The evidence collected and the design simulation calculations show that US government and NIST offered explanations that do not hold water. What is astonishing and totally humiliating is the fact that the government thought the world was full of morons, and that they could pull this off by saying utter nonsense like jet fuel caused the collapses.
Robert S. Fritzius, EE
Electrical Engineer
BS Electrical Engineering, Purdue University Lafayette IN, 1966
I am convinced, based on the apparent free-fall nature of WTC buildings 1,2 and 7, that they were brought down by controlled demolition. If Osama bin Laden was…
Robert S. Fritzius, EE
BS Electrical Engineering, Purdue University Lafayette IN, 1966
Starkville, MS
Occupation: Electrical Engineer
BS Electrical Engineering, Purdue, 1966. Navy enlisted electronics technician for eight years with final rank of Electronics Technician Chief. Four of these years were at Purdue under NESEP. After OCS and commissioning I earned naval aviator wings (jet). I stopped flying in 1968 and worked my final ten years of naval service in long haul communications, electronic warfare, and satellite communications. Since retiring from the navy I have attended college on and off in the areas of mechanical engineering, near eastern archaeology, and geology. I currently do unfunded research and report my findings at my Shade Tree Physics website at http://www.datasync.com/~rsf1/
I am convinced, based on the apparent free-fall nature of WTC buildings 1,2 and 7, that they were brought down by controlled demolition. If Osama bin Laden was involved in those events he must have been so in the role of controlled demolition contractor.
Petition Signatories
Pete Terpak, BSMET
Mountaintop, PA
Occupation: Business Consultant
Education: Penn State University
Pete Terpak, BSMET
Penn State University
Mountaintop, PA
Occupation: Business Consultant
I hold a BSMET from Penn State University. The disciplines that I have studied in theory, lab, and profession include metallurgy, truss design, strength of material, statics, dynamics, kinematic design, etc.. I wrote my senior thesis on creep deformation of materials.
Everything that I have viewed from both sides of this debate and countless documentaries convince me more and more every day that there is something wrong with the official explanation of events. Anyone who has a basic understanding of physics can look at any of the three building fall and know that is simply not possible at that rate. The explanation of the way that the towers fell (specifically the trusses failed) does not make sense to me as someone who has designed trusses.
Allen Whitehead
Elma, WA
Allen Whitehead
Elma, WA
I have a liberal arts bachelor degree in critical thinking.
I have reviewed many articles about the 911 attack and a lot does not add up, especially building 7.
Brian E. Debonee
Manchester, CT
Occupation: Machinist (Disabled Now)
Education: Some college
Brian E. Debonee
Some college
Manchester, CT
Occupation: Machinist (Disabled Now)
trades in: offset printing, small machine repair, machining, computer repair, and computer programming in Basic, and Quick Basic.
When the government got rid of the evidence, and denied everything, I knew then that America was and is a terrorist nation. I have no allegiance to this country anymore. 911 showed me how much our government cares about it's citizens. I now understand why Americans are detested all around the world. What can one say when they can not even trust their own government to safeguard them.
Keith M. Henley-Smith
Melbourne
Occupation: Research Manager
Education: degreed & licensed
Keith M. Henley-Smith
degreed & licensed
Melbourne
Occupation: Research Manager
Over forty years in the Electric steel-making industry as a Melting shop Manager and Technical Director, have developed steel grades and alloys. Now working in R&D in Matmor a unique metal producing technology.
"I recently watched a presentation on the History channel entitled ""the missing evidence."" It took the view that the whole thing was caused by two airplanes. I have never believed this, but I thought it was wise to watch another opinion by a leading Nuclear Physicist from the US and another expert from the UK. At first I was a bit unsure and that they may be some credibility to the 'Official NIST' version. As the experts got into their presentations it became obvious that they knew nothing at all about metals, in particular structural steels and aluminium. I have been employed in the Steel industry for over forty years and have made thousands of tonnes of Rebar grade on electric arc furnaces in the UK, Germany and Australia so I think I may know a bit about that stuff. I also know quite a lot about Aluminium melting and casting. When I heard what these two Experts had to suggest caused the failure of the twin towers I was staggered. How on earth can anyone who is supposed to educated in sciences come up with such rubbish? An interesting thing was that neither of them mentioned WTC7!"
Scott G. Murray
Sherwood Park, AB, Canada
Occupation: Non Destructive Testing Technician
Scott G. Murray
Sherwood Park, AB, Canada
Occupation: Non Destructive Testing Technician
Twenty years in the materials engineering and NDT sector; Fifty years on this planet.
Building Seven did not just fall down on its own . I have watched footage of this building and other buildings collapsing at near freefall speed into its own footprint and have no doubt whatsoever that this was a controlled demolition. The evidence is overwhelming.
Martin J. Mckinnie
North Ogden, UT
Occupation: Dental Technician
Martin J. Mckinnie
North Ogden, UT
Occupation: Dental Technician
Trained Dental Ceramist, with extensive knowledge in metallurgy, Cad-Cam technology and ceramics. 40 years experience and currently retired. Haven't been asleep since the Kennedy assassination.
Our whole corrupt government is now based on these lies. The truth must come out so we can start a new course and establish a true government for the people not corporations. These kind of lies have created a government that makes it impossible for honest government employee's cannot survive.
John E. Basford
Southampton, NY
Occupation: Engineer/Blacksmith
Education: Secondary Modern
John E. Basford
Secondary Modern
Southampton, NY
Occupation: Engineer/Blacksmith
I am predominantly a self educated man. I only took from school that which I needed from it. The ability to read, write and count.. All else, I deemed as propaganda. I have studied marine engineering, mechanical engineering, history and science on my own terms since leaving education. I have written a book and held multiple licences for different vehicles. I have some military training and extensive firearms experience.
9/11 was a highly complex, exquisitely orchestrated and scientifically technical operation carried out by extremely professional operatives. State of the art military equipment and highly competent personnel were employed to bring about the destruction of that which was engineered not to be destroyed. 19 barely trained Arabs who were not qualified to fly a single engine aircraft armed with box cutters performed maneuvers in airliners that would have made veteran combat pilots break out in a cold sweat and scored direct hits on their targets...? Yeah right!
Timothy A. Kotlensky
Houston, TX
Occupation: Professional Archaeologist
Education: MS
Timothy A. Kotlensky
MS
Houston, TX
Occupation: Professional Archaeologist
I am a professional archaeologist in the practice of cultural resources management. I am also an independent researcher of historic industrial sites and material culture with a focus on the history of iron- and steel-making.
I am interested in collaborating with other professionals to develop a physical and online archive of documents, reliable and vetted eyewitness testimonies, and artifacts associated with the destruction of WTC 1, 2, and 7 that demonstrate the likelihood that other, officially-unaccounted means were employed to destroy World Trade Center 1, 2, and 7 on 9/11. I believe that my experience as a professional manager of archaeological collections would be useful to these ends and would help further the goals of Architects and Engineers for 9/11 Truth.
Robert Joos
Wimbledon, ND
Occupation: Farmer
Education: HS
Robert Joos
HS
Wimbledon, ND
Occupation: Farmer
Lifetime experience with metal fabrication and repair of machinery.
Steel and concrete buildings cannot collapse into rubble from building fires, it's impossible.
Austin Whitehead
St Peters, MO
Occupation: Welding Student
Austin Whitehead
St Peters, MO
Occupation: Welding Student
I am a welding student and deal with melted steel everyday.
Towers don't just fall the way they did on 9-11. We are not getting the truth from the media or the government which is not uncommon today. The government and the government controlled media is trying to cover something up that should not be covered up.
Alberto Cubero
PalauSolita I Plegamans, Spain
Alberto Cubero
PalauSolita I Plegamans, Spain
Went to school in London till the age of 16. I've been working as an aluminum window and door installer for more than 20 years.
The evidence is overwhelming. 9/11 was NOT what we were told. The official version just doesn't make any sense. WTC 7, what made it fall like it did? The Twin Towers, blown to dust. By what action? The steel melted beams. How did they melt? How could these three buildings fall so fast, practically disintegrating on their way down? The world needs to know. The official version is obsolete.
Anthony T. Dibenedetto
Newbury, MA
Occupation: Machinist
Education: TRADE SCHOOL. SOME COLLEGE WORK.
Anthony T. Dibenedetto
TRADE SCHOOL. SOME COLLEGE WORK.
Newbury, MA
Occupation: Machinist
A machinist with 30 years experience. Starting from manual to C.N.C. systems. Experience working with various exotic materials ig. Stellite, molybdenum. inconel and more. Tool and die design including fabrication of components with tolerances of +,- .ooo1 in. 0.0025mm. fabrications' predominately for D.O.D.
I am aware of what slag produced via Thermite looks like.
Jason Lawless
Ayr, ON, Canada
Occupation: Teacher
Education: Post Secondary Degree
Jason Lawless
Post Secondary Degree
Ayr, ON, Canada
Occupation: Teacher
Canadian Welding Bureau Certified Structural Steel Welder, 3 YEARS Structural Welding and Cutting experience; BA Geography McMaster University; BEd Brock University; Minor in French
Official story contradicts irrefutable laws of physics.
Dennis Biswane
Grave, VT
Dennis Biswane
Grave, VT
Studied for several years in Met al. Service engineer.
False flag (controlled demolition) Obvious inside job.
Doug Mackerman
Phoenix, AZ
Doug Mackerman
Phoenix, AZ
I am a software engineer by trade and have studied metallurgy although not certified in any (structural) discipline.
I do not believe in the official explanation of the events of 9/11. I believe buildings 1, 2 and 7 were brought down by controlled demolition. I had visited WTC 2 several months prior to 9/11 and thought it odd that the elevators would not take me to all floors. At the time I believed that it was because the spaces were being built out, but now I believe that it would have been necessary in order to strategically place thermite charges. I believe a serious investigation is necessary.
Suzanne M. Klitgaard
Redding, CA
Suzanne M. Klitgaard
Redding, CA
A mother, wife, in school currently in Welding, Metallurgy, Fabrication. Was in Construction in my 20,s, the Food Industry in my 30,s. A truck driver in my 40,s. Now going to college to becoming a Certified Welder-Artist. Studying Herpetology as a hobby. Animal rescue from time to time. Working with Recovery people from time to time. on my spirituality.
911 has always had a BIG FAT question mark attached well before the Twin Towers and Building 7 came perfectly tumbling down. I am very matter of fact and blunt, leaving emotion as a secondary. In the 80,s is when my faith went south and questioned pretty much everything. Today I have come to understanding fear. The evidence is clear...right in front of my face. Why so many people are acting like lemmings boggle my mind. Education and awareness is key to doing something about the truth.It must be exposed. Uncovered. Investigated. The 911 event was in the making YEARS before it took place...
Ericah Thomas
Houston, TX
Occupation: Fabrication
Education: Associates degree. Certified welding inspector
Ericah Thomas
Associates degree. Certified welding inspector
Houston, TX
Occupation: Fabrication
For the past 12 years I've been directly involved in the fabrication of large scale industrial oilfield equipment. Specifically metallurgy and structural integrity, weldability, and compatibility of different grades steel.
On 9/11/2001 I was 15 years old. At the time I believed what I was told regarding the event. That 'bad guys' hijacked planes and crashed them into the towers causing them to collapse. However upon completing high school and college and entering the workforce I ended up in structural fabrication. After being surrounded by steel & fabrication for over a decade now, and conducting my own tests and experiments on fatigue and failure I've come to my own conclusion regarding the collapse of the two towers and WTC 7 which is seldom spoken about. I've researched the grades of steels used in the World Trade Centers construction, and found they were standard materials such as ASTM A36, and ASTM 242 among about 10 other grades. Knowing the yield point of the steel grades in question in addition to fact that melting point is around 2700F and that jet fuel burns at a maximum temp of 1500F, I can say with 100% certainty that it's physically and mechanically impossible that the steel was weakened to the point of collapse due to fire caused by the jet fuel weakening the steel beams (which were also coated with fire retardant). Granted plain Jane carbon steel and even HSLA steel can lose some of its strength at temperatures much lower than its melting point, but there were pools and rivers of molton steel. Fire just can't do that to steel. When we weld HSLA plate it had to be preheated for extended periods of time depending on the specific material. I'm talking about a propane rosebud placed an inch from the surface of a plate and burning at high temps for more than an hour just to prepare the piece for welding. Regarding WTC7, which I had never even heard of until about 3 years ago (thanks to AE911), it's unbelievably obvious that the building fell at free fall speed which would be impossible to do unless there were no lower floors adding resistance and slowing the fall. Meaning those lower floors of resistance had to have their structural support severed. At the very minimum the citizens of the United States, especially the victims and their families of 9/11 deserve an outside investigation of what really happened to the three buildings. I believe the two towers and building 7 are the only buildings in the history of modern construction that have been brought down due to fire.
Zachary Richards
Middleton, NS, Canada
Zachary Richards
Middleton, NS, Canada
Being a carpenter for some time and now a machinist, I have basic knowledge on structures and metallurgy. I have worked on and understand how large commercial buildings are constructed and built to be fire resistant and almost fireproof. With this knowledge I believe it is impossible that the Twin Towers and Building 7 were brought down due to fires.
It is quite clear that the three buildings on 9/11 were brought down in a controlled demolition. A proper and honest investigation on the events of 9/11 needs to be done so the world can know the truth.
Ryan Barnes
Muncie, IN
Ryan Barnes
Muncie, IN
Husband, father, worker. Know when I'm being lied to.
We were and are being lied to. It's quite absurd really that they think we are this gullible.
Thomas J. Sloane, CWI
Canyon Lake, TX
Occupation: Metallurgist, Welding Expert, Certified Welding Inspector, Struc
Education: University of Texas at San Antonio
Thomas J. Sloane, CWI
University of Texas at San Antonio
Canyon Lake, TX
Occupation: Metallurgist, Welding Expert, Certified Welding Inspector, Struc
Welding expert. AWS certified welding inspector. Structural Steel inspector (AWS D1.1). Metallurgist
I highly doubt the structural integrity of the buildings were heated beyond a yield point that would cause near free-fall speed of the towers' destruction.
Mark J. Smith
Braintree
Occupation: Mechanical Engineer
Education: student
Mark J. Smith
student
Braintree
Occupation: Mechanical Engineer
It's blatantly obvious that there was a huge '3rd wheel' involved in the destruction of the towers, sadly, I believe that the 3rd wheel was the US government.
Michael H. Bratonja
Mequon, WI
Michael H. Bratonja
Mequon, WI
45 years working steel and its alloys and some metallurgy and metalography classes in college.
A lot of nonsense. I know what happens with steel and have worked with it from its beginning as an ore to its final product.
Norbert J. Sindermann
Niddatal, Germany
Occupation: Mech. Eng & Welding Technologist
Education: Fachhochschule Koblenz Germany & STLVA Munich
Norbert J. Sindermann
Fachhochschule Koblenz Germany & STLVA Munich
Niddatal, Germany
Occupation: Mech. Eng & Welding Technologist
Design, Projecting, Project Management, Sales of Automatic Manufacturing and Inspection Equipment
Clear traces of thermite used as cutting/melting agent.
John W. Welsh
Ingleside, TX
Occupation: Welding Inspector
Education: High School Graduate
John W. Welsh
High School Graduate
Ingleside, TX
Occupation: Welding Inspector
I am a high school graduate and I have been working as a welder in the offshore fabrication industry and now I am a welding inspector for a total of 17 years now. As an inspector I have learned a lot about metallurgy.
There is too much evidence that points toward that this was perpetrated by our own government. They must think we are all stupid or something. Most people know what a controlled demolition looks like. Whether it's a building or large amounts of earth being blown up. They both have a timed sequence.
Leonard Munroe
Welland, ON, Canada
Occupation: Mechanical Engineering Technician
Education: Degreed
Leonard Munroe
Degreed
Welland, ON, Canada
Occupation: Mechanical Engineering Technician
I have completed 4 years as a mechanical engineering technician. I have taken classes such as metallurgy, physics and many others that really help to understand how these collapses did not happen as they were portrayed.
I believe 9/11 absolutely did not happen how the media and the rest of the world portrays it. Anyone who can look past what the U.S Government and NIST has told us, and use their own head, can easily see this was a classic controlled demolition. There are way too many unknowns and impossibilities for all these events to happen as the U.S Government says it did.
Matthew Bispo
West Babylon, NY
Occupation: Union Ironworker
Education: Some college
Matthew Bispo
Some college
West Babylon, NY
Occupation: Union Ironworker
I have been watching 9/11 videos for 15 years. It's about time the truth comes out about how it was planned. I'm a union Ironworker of 12 years and know the characters and reactions of steel beams and columns.
Steel I beams do not melt from office fires, it takes a torch or some other kind of chemical reaction. Even if the jet fuel 'could' melt steel, the free fall speed isn't realistic. If 4-6 floors collapsed onto others and then others etc., eventually the remaining 40-60 floors would give great resistance and slow the speed of destruction down significantly.
Hitesh Patel
Auckland, New Zealand
Occupation: Sales Manager
Education: University of Auckland
Hitesh Patel
University of Auckland
Auckland, New Zealand
Occupation: Sales Manager
Bachelor of Chemical and Materials Engineering (1999) Have worked in mining, metallurgy, chemical processing, oil and gas, food and beverages for the last 20 years. Have gained Masters of Business and Technology (UNSW, 2006)
I 100% support any movement or uncovering the truth behind this calamity.
Alex E. Gutierrez
Daly City, CA
Occupation: Welding Engineer
Education: California Poly Technic Univeristy, San Luis Obispo and Ohio State University
Alex E. Gutierrez
California Poly Technic Univeristy, San Luis Obispo and Ohio State University
Daly City, CA
Occupation: Welding Engineer
Have been in welding, fabrication and manufacturing industry for over 30 years.
I don't believe the official story about what happen on 9/11. As an engineer, there are too many un-answered questions.
Roger L. Madison
Davis, CA
Occupation: Construction
Education: BA
Roger L. Madison
BA
Davis, CA
Occupation: Construction
I am fortunate enough to have had a multi disciplinary college degree that emphasized critical thinking. By trade and interest I am familiar with concrete, steel, and building practices.
The destruction of the three towers as documented by video absolutely defies any official narrative about airline collisions or fires. The rapid collapse so resembling a planned demolition can only be explained as being exactly that.
Claude A. Amacher
RomanelSurMorges, Switzerland
Occupation: Retiered
Education: Engineer-Technician ETS, The School of Engineering and Management Vaud, Switzerland, 1974
Claude A. Amacher
Engineer-Technician ETS, The School of Engineering and Management Vaud, Switzerland, 1974
RomanelSurMorges, Switzerland
Occupation: Retiered
Electronic engineer & Service Engineer ARL Applied Research Lab (Bausch & Lomb div.) Metallurgical analysis (X-probe, spark analysis, etc ...) Project Manager (Networking, Power distribution for schools, Hospital, Security for Banks, etc ...) Retired (since 2016)
Some problems with the official story.... 1) The near free fall of 3 buildings (Twin Towers and WTC 7) the same day is very strange 2) Violation of Newton Law 3) Very, very high level of steel corrosion (sulfur) produced by which kind of reaction? 4) Temperature max of normal fires do not reach the melting point of steel 5) Microspheres found in the dust (exothermic reaction due to thermite thermate ?) 6) Fireman heard a lot of explosions 7) Some pictures show holes like Swiss cheese and in the Ground floor the steel pillars was cut at 45' (like demolition). I believe that UL (safety consulting and certification company) made a real good job to calculate and erect these towers. This was either an inside job at the US government level or a false flag operation.
Nathan D. Albrecht
Crown Point, IN
Occupation: Union Boilermaker
Nathan D. Albrecht
Crown Point, IN
Occupation: Union Boilermaker
High school graduate 4 year apprenticeship on structural steel construction and metallurgy.
Disgusting how the first investigation was handled. We the American people deserve a truly independent investigation to uncover what really happened.
Ian Mesman
Rhinebeck, NY
Ian Mesman
Rhinebeck, NY
I work as a crane operator. I have been to tech schools and have a good understanding of metallurgy.
I've been in the engineering field most of my life and I've found the NIST report on the buildings collapse to be inconsistent with the events of the day especially Building 7.
Luigi H. Santos
Warwick, RI
Occupation: Metallurgist
Education: URI
Luigi H. Santos
URI
Warwick, RI
Occupation: Metallurgist
I've been involved with non-precious and precious metal castings . Annealing metals, wire drawing. The process of MFG all types of steel findings and wire drawing for chain of all metals.
This was a well planed demolition. The single most successful demolition I have ever witnessed. There was likely A Thermite reaction of aluminum oxide blast media common makeup is Al2O3. There was nothing in an office building that could create a Crucible atmosphere needed to melt steel. Yet I watched as molten metal sprayed out of the side of the Twin Towers. The buildings fully Engulfed in Flames could have gone on burning for days without any serious structure damage. Yet to fall completely to the ground in ten seconds in just over one hour was a perfect demolition and nothing more.